高电压下多孔氧化铝薄膜结构色的制备及分析

多孔氧化铝的微观结构对其光学性能有着显著影响.本文采用高电压制备了普通阳极氧化铝薄膜(单层薄膜)和经高电压表面处理后的光子晶体(多层薄膜),通过理论分析,并结合扫描电镜分别对两种环形氧化铝薄膜建立了微观结构模型图.研究表明:在磷酸电解液中,使用一步阳极氧化方法制备的普通阳极氧化铝多种环形结构色,从中心到边缘结构色逐渐蓝...     

基于ANSYS的双列圆锥滚子轴承预紧力有限元分析

应用赫兹弹性接触理论,首先分析双列圆锥滚子轴承的结构参数、预紧原理及其预紧受力,再运用SolidWorks建立了双列圆锥滚子轴承的三维模型,最后通过ANSYS进行有限元分析计算,得出在不同的预紧载荷下的接触应力和变形,为轴承预紧力分析提供了新的研究方法。     

不锈钢表面阻氢涂层研究进展

不锈钢是高压氢系统的常用材料,在氢能储输技术中发挥重要作用,但高压氢环境引起的塑性降低、疲劳裂纹扩展速率加快等不锈钢氢脆问题,严重阻碍了氢能的产业化发展,在不锈钢材料表面制备阻氢涂层是解决不锈钢氢损伤问题的重要手段之一。本文首先综合介绍了典型涂层材料的应用特点及阻氢性能,探讨了制备工艺对涂层阻氢性能的影响、不同涂层材料的阻氢机理,并分析了涂层阻氢性能影响因素,之后总结了涂层阻氢性能评价方法及各种评价方法的优势与不足,并根据各种评价方法的技术特点,指出每种方法的适用范围。最后,基于阻氢涂层研究进展,文章提出以开发新型涂层结构为研究重点,同时加快新型涂层材料的探索,并重点关注涂层氢环境原位性能评价方法的研究。     

PBS/PHB共混合金的制备及其性能

采用双螺杆挤出机将聚羟基丁酸酯(PHB)与聚丁二酸丁二酯(PBS)熔融共混,制备了PBS/PHB合金,并研究了其性能.结果表明:PBS与PHB组成了热力学互容体系;随着PHB用量的增加,PBS/PHB合金的晶体形态为尺寸逐渐减小的环带球晶,合金的拉伸强度与韧性显著增加;PBS/PHB合金在紫外光老化后的抗冲击性能下降,...     

Mechanical,morphological, and thermogravimetric analysis of alkali-treated Cordia-Dichotoma natural fiber composites

ABSTRACT

Usage of composites with natural fiber reinforcement is drastically increasing in recent times because of their low density, biodegradable nature, and low cost. However, natural fibers have certain core problems such as poor adhesion between the fiber and matrix and a relatively high degree of moisture absorption. Alkaline treatment of natural fibers is aimed at improving the adhesive strength so that effective stress transferability takes place in the composite. In the present work, Cordia-Dichotoma fibers were treated with sodium hydroxide (NaOH) and composites were prepared with different weight ratios of these fibers reinforced with epoxy. The prepared composites were tested for their tensile and flexural strengths (mechanical properties). Besides, for a comprehensive material characterization, IR spectroscopy (FT-IR), scanning electron microscope, and thermogravimetric analysis were carried out. This work investigates the influence of aforementioned NaOH treatment on thermal, mechanical, and morphological properties of the composite material.     

Mechanical,electrical and thermal performance of hybrid polyethylene-graphene nanoplatelets-polypyrrole composites: a comparative analysis of 3D printed and compression molded samples

ABSTRACT

The paper focuses on the investigation of the 3D printing of multi-functional composites using graphene nanoplatelets (GNP), polypyrrole (PPY) and linear low-density polyethylene (LLDPE). A holistic approach was performed and characterization methods to assess the properties of 3D printed composites and compared with those of compression molded composites and neat LLDPE to understand the factors affecting their performance. It has been noted that the 3D printed composites have superior mechanical and electrical properties than neat LLDPE, but slightly lower compared to those of compression molded composites having high packing density of fillers. The nominal increases were 13.2% (tensile strength), 31.9% (flexural strength), 29.4% (flexural modulus) and 24.7% (storage modulus).     

Degradation of Thermal Barrier Coatings by Fuel Impurities and CMAS: Thermochemical Interactions and Mitigation Approaches

Degradation of free-standing yttria-stabilized zirconia (YSZ) and CoNiCrAlY coatings (300 μm) due to V₂O₅ and a laboratory-synthesized CMAS was investigated at temperatures up to 1400 °C. Reactions, phase transformations, and microstructural development in coatings were examined by using x-ray diffraction, scanning electron microscopy, and transmission electron microscopy. The molten deposits destabilized the YSZ and reacted with the thermally grown oxide with various phase transformations and reaction product formation. A dense, continuous environmental barrier overlay, based on oxides, applied by electrophoretic deposition was effective in mitigating the molten deposit attack. Enriching CMAS composition with Al promoted the crystallization of anorthite platelets and MgAl₂O₄ spinel, and mitigated CMAS ingression. EPD MgO overlay was also effective in protection against V₂O₅ melt by formation of magnesium vanadates. EPD alumina overlay deposited on thermal barrier coatings with APS 8YSZ and bond-coated IN939 superalloy retained its adhesion and structural integrity after prolonged furnace thermal cycle test at 1100 °C.     

Performance evaluation of CBN,coated carbide,cryogenically treated uncoated/coated carbide inserts in finish-turning of hardened steel

In the present work, the performance of cubic boron nitride (CBN) inserts was compared with coated carbide and cryogenically treated coated/uncoated carbide inserts in terms of flank wear, surface roughness, white layer formation, and microhardness variation under dry cutting conditions for finish turning of hardened AISI H11 steel (48–49 HRC). The flank wear of CBN tools was observed to be lower than that of other inserts, but the accumulated machining time for all the four edges of carbide inserts were nearer to or better than the PCBN inserts. Results showed that tool life of carbide inserts decreased at higher cutting speeds. The surface roughness achieved under all cutting conditions for coated-carbide-treated/untreated inserts was comparable with that achieved with CBN inserts and was below 1.6 μm. The white layer formation and microhardness variation is less while turning with cryogenically treated carbide inserts than the CBN and untreated carbide. At low to medium cutting speed and feed, the performance of carbide inserts was comparable with CBN both in terms of tool life and surface integrity.     

二元醇共价交联羧基化石墨烯复合膜和正丁醇脱水性能

以二元醇(乙二醇、1,3-丙二醇和1,4-丁二醇)为交联剂,通过抽滤的方式在涂覆盐酸多巴胺的聚醚砜(PES)支撑层上制备了共价交联的羧基化石墨烯/聚醚砜(CG/PES)复合膜。稳定性测试证明盐酸多巴胺的涂覆和二元醇的交联显著提高了分离层和支撑层以及CG纳米片间的结合力。采用扫描电子显微镜、X射线衍射仪、X射线光电子能谱仪和水接触角测试仪对复合膜的物化性质和微观形貌进行了表征。结果表明,所得复合膜的分离层连续无缺陷,厚度在60～64nm之间。二元醇与CG纳米片上的羧基成功发生反应,将CG纳米片锚固在一起。交联剂的引入没有大幅降低亲水性且实现了对分离层层间距的有效调控,随二元醇分子尺寸增加,所得复合膜的层间距由0.761nm提高到0.778nm。CG/PES复合膜对正丁醇/水混合物具有优良的渗透汽化分离性能。在料液温度为50℃、料液中水的质量分数为10%时,三种交联剂所得复合膜的渗透通量分别达到0.79kg/(m²·h)、0.87kg/(m²·h)和0.96kg/(m²·h),而分离因子比未交联的复合膜高一个数量级。15天的...     

Rheological Studies on Virgin and Metallized Unsymmetrical Dimethyl Hydrazine Gelled Systems

Rheological studies on unsymmetrical dimethyl hydrazine-methyl cellulose gelled system have been conducted under varying shear rates in order to establish its flow characteristics. The gel is found to behave as a pseudoplastic thixotrop. The viscosity build-up with respect to time has been traced till apparently a firm gel is set. The viscosity is found to increase with time rapidly in the beginning and minor changes are observed thereafter. The effect of temperature and extent of metal (Al and Mg) loading on apparent viscosity of the gelled system has also been investigated. Both the apparent viscosity and thixotropic character of the virgin gel are found to decrease with increase in temperature. An increase in rate of shear decreases the apparent viscosity significantly. The thixotropic character of the metallized gelled systems is observed to increase with metal content and that they exhibit a shearthinning behaviour too. Power law has been applied to assess the variation of pseudoplastic index n and consistency index K with temperature and metallization. The results reveal that n increases with temperature and decreases with metal loading whereas K shows an opposite trend. The yield value of gelled systems is noted to show decrease with temperature and increase with metal incorporation.