Transferring information from one experiment to another

This paper presents a rational method (based on Bayes' Theorem) for transferring information on parameter values from one experiment to another, in situations where the mathematical models for the two experiments share some parameters in common. The uncertainty in the estimates of the parameters, which reflects the experimental error in the initial experiment, is properly transferred as well. The use of the method is demonstrated by applying it to a fairly complicated system, typical in chemical reaction engineering, in which the kinetic parameters in a model for the hydrogenolysis of butane reaction were estimated using data obtained from a bench-scale, integral packed-bed reactor. These parameter estimates were then transferred to a model for a fluidized bed reactor in which the same chemical reaction occurred. Using the fluidized bed data they were updated and two additional parameters in the fluidized bed model were also estimated. This procedure allows a more realistic estimate of the uncertainty in all parameter values in the model for the fluidized bed reactor.     

Blends of chlorinated isotactic polypropylene with poly(ethylene-co-vinyl acetate) I. Effect of component polymers composition on the blend miscibility

Chlorinated isotactic polypropylenes (CPP) having various chlorine contents were blended with poly(ethylene-co-vinyl acetate)s (EVA) having various vinyl acetate (VA) contents. The blends were made by casting films from dilute THF solutions and miscibility of the blends was identified by single glass transition temperature, which was confirmed by DSC and dynamic mechanical measurements. Based on the miscibility data from a large number of CPP/EVA combinations, a miscibility map was depicted where CO equivalent weight (CO-EQW) of EVA was plotted against chlorine equivalent weight (Cl-EQW) of CPP. Though an attractive interaction between CPP and EVA could be detected in all the miscible and immiscible blend pairs, miscibility of the CPP/EVA blends could solely be observed in a relatively narrow range of Cl-EQW ca. 65–100 and CO-EQW ca. 170–230.     

Soap‐free emulsion copolymerization of perfluoroalkyl acrylates in the presence of a reactive surfactant

Soap‐free emulsion copolymerization of perfluoroalkyl acrylate (FA)/methyl methacrylate (MMA)/n‐butyl acrylate (n‐BA) was carried out in the presence of sodium 2‐acrylamide‐2‐methyl propanesulfonate (AMPSNa) as a reactive surfactant and potassium persulfate (KPS) as an initiator. An analysis of the effects of concentration of AMPSNa, KPS, FA as well as polymerization temperature on the kinetic features (rate of polymerization) and colloidal characteristics (mean particle diameter, particle disperse index, particle numbers, and surface charge density) was followed. NMR, FTIR, AFM, and fluorine‐selective electrode analysis were used to characterize the composition and morphology of the FA copolymers. Both AFM analysis and contact angle measurements strongly implied that the fluorinated segments migrated to the outmost surface and created films with lower surface energy. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 2438–2444, 2007     

Effects of estrogen-induced hyperlipidemia on the erythrocyte membrane in chicks

The effects of estrogen-induced hyperlipidemia on plasma lipid peroxidation, fatty acid composition and osmotic fragility of erythrocytes in chickens were studied. Young male chickens implanted with estrogen for three wk developed a marked hyperlipidemia. Plasma levels of triglyceride, cholesterol and phospholipid were elevated 68-, four- and 24-fold, respectively, over controls. There was also a two-fold increase in plasma lipid peroxidation measured by the thiobarbituric acid test. Vitamin E supplement (1,000 IU/kg diet) reduced the plasma lipid peroxidation to the control level, but had no effect on the plasma lipid content. Estrogen-induced hyperlipidemia resulted in changes in the fatty acid composition of membrane lipids of erythrocytes. The major changes were an increase in oleic acid from 10.0% to 14.2% and a decrease in linoleic acid from 31.3% to 26.0%. The erytrocytes with an altered membrane fatty acid composition were found to have an increased osmotic fragility. It was apparent that there was a direct correlation between the oleic acid content and the osmotic fragility of erythrocytes.     

Morphologies and microstructures of tree-like carbon produced at different reaction conditions in a CVD process

Centimeter-size multi-branched tree-like carbon structures have been generated by the catalytic chemical vapor deposition of toluene using ferrocene as the catalyst precursor and investigated by means of SEM, TEM, and EDX. It is found that a temperature of 1000-1200 °C and a carrier gas flow rate of 1000-2500 ml/min are necessary for the generation of the carbon trees. Their morphologies and microstructures change greatly with the changing reaction conditions. The fractal dimensions of the trees are calculated to quantitatively investigate the influence of different reaction temperatures on the morphologies.     

Enhanced utilization bound of Rate-Monotonic scheduling in Controller Area Networks

When priorities to message streams are assigned using Rate Monotonic (RM) for a Controller Area Network (CAN), the utilization bound is known to be about 25% for CAN 2.0A and 29% for CAN 2.0B. In this letter, we present a higher utilization bound than the existing ones with a reasonable constraint. The new utilization bounds are approximately 34% for CAN 2.0A and 41% for CAN 2.0B if no single message stream's utilization exceeds 46% or 27% of the total utilization for CAN 2.0A or CAN 2.0B, respectively.     

A survey of traffic-based routing metrics in family of expected transmission count for self-organizing networks

Self-Organizing Networks (SONs) are attractive for applications where flexibility, resilience, and a large network service area are required. In order to meet the requirements of those applications, the principal issue is to guarantee efficient routing in SONs. Hence, the design and selection of appropriate routing metrics is important. A mass of metrics have been proposed in the past several decades. Among all the metrics, Expected Transmission Count (ETX) has drawn the most attention. Since the proposal of ETX, many ETX-based or extended metrics have been proposed. ETX and its descendants compose the ETX family. This paper is an attempt to analyze, compare and summarize traffic-based routing metrics in the ETX family. Details of each routing metric are presented and analyzed. Some of our viewpoints on the principal for designing metrics in SONs are presented.     

Semi-annual cycle of sea-surface temperature in the East/Japan Sea and cooling process

Semi-annual cycles of the sea-surface temperature (SST) in the East/Japan Sea (EJS) and their forcings were examined by analysing National Oceanic and Atmospheric Administration/Advanced Very-High-Resolution Radiometer data, scatterometer wind vectors, and heat flux data. The semi-annual cycle contributed to the total variance of the SST by 8% and amounted to 25% of the amplitudes of the annual SST cycle, particularly in the Tatarskiy Strait and along the continental shelf off Russia. The lowest phase, corresponding to the minimum SST, occurred during early November and 6 months earlier in May or June depending on the position. The forcings of the semi-annual cycle were not semi-annual but substantially annual with a lag of 6 months, which gave rise to SST cooling in spring and autumn. Our analyses illustrated that SST cooling in autumn was caused by direct, local atmospheric wind forcings, whereas the cooling with large amplitudes of the semi-annual cycle in spring was caused by the non-local, remotely forced cold water advection of the Liman Current associated with sea-ice melting in the Tatarskiy Strait. The phase lag of 1–2 months between the complete melting of the sea ice in the Tatarskiy Strait and the surface cooling along the Russian continental shelf was related to the advection of cold water from sea ice in the form of the Liman Cold Current. The semi-annual cycle also resulted from asymmetry of the time series of the SST due to a long cold winter and a short warm summer. To understand how SST curves are distorted and asymmetric, we suggested two mathematical parameters of kurtosis and skewness. In addition, we suggest that the ratio of the semi-annual amplitude to the annual amplitude of SST harmonics can be used as a typical indicator of the asymmetry in year-to-year SST variations.     

The use of non–physical standards in colour communication and matching

As a result of developments in spectrophotometry, together with improved accuracy in computer colour matching and laboratory dyeing, non–physical standards (reflectance data) can now be used for the successful communication, matching and quality control of colour. In colour palette generation, ‘matching by numbers’ has become a reality.     

Flow regime, hydrodynamics, floc size distribution and sludge properties in activated sludge bubble column, air-lift and aerated stirred reactors

This paper presents a comparative study how reactor configuration, sludge loading and air flowrate affect flow regimes, hydrodynamics, floc size distribution and sludge solids-liquid separation properties. Three reactor configurations were studied in bench scale activated sludge bubble column reactor (BCR), air-lift reactor (ALR) and aerated stirred reactor (ASR). The ASR demonstrated the highest capacity of gas holdup and resistance, and homogeneity in flow regimes and shearing forces, resulting in producing large numbers of small and compact flocs. The fluid dynamics in the ALR created regularly directed recirculation forces to enhance the gas holdup and sludge flocculation. The BCR distributed a high turbulent flow regime and non-homogeneity in gas holdup and mixing, and generated large numbers of larger and looser flocs. The sludge size distributions, compressibility and settleability were significantly influenced by the reactor configurations associated with the flow regimes and hydrodynamics.