Flow analysis of engine cooling system for a passenger vehicle

A numerical simulation is carried out to analyze the flow field of cooling air through the radiator and engine compartment. In order to consider the strong effect of the suction-type flow by the cooling fan at engine idling condition, a potential flow analysis is attempted by the assumption of a line sink located at the position of the cooling fan. The governing equations for steady two-dimensional, incompressible, turbulent flow are solved with the two-equationk-ε model for turbulence. The velocity profiles in the underhood engine compartment and around the front-end of a real vehicle are measured to compare with the numerical results. The agreement between the numerical and experimental results is fairly good. It is concluded that a two-dimensional computation is a fast and efficient tool for predicting the effect of front-end design on the cooling air flow through the radiator.     

Antioxidant activities of aqueous extracts from three cultivars of guava leaf

In order to obtain basic data required for utilization of guava leaf as a functional substance, the antioxidant activities of aqueous extracts from 3 cultivars of guava leaf (‘Apple color’, ‘Ruby’, and ‘Safeda’) were examined. The total phenolic contents of the aqueous extracts ranged from 257.38 to 293.25 mg/g gallic acid equivalents. DPPH, ABTS, reducing power, ferric reducing antioxidant power (FRAP), ferric thiocyanate (FTC), and malondialdehyde (MDA) assays indicated that the aqueous extract of the ‘Ruby’ cultivar was the most potent radicalscavenger and reducing agent compared to the other 2 cultivars. Therefore, this study verified that aqueous extract from the ‘Ruby’ cultivar possessed strong antioxidant activity that correlated to its high level of phenolics, particularly gallic acid. In conclusion, the aqueous extract of the ‘Ruby’ cultivar of guava leaf may be utilized as an effective source of functional food materials, including natural antioxidants.     

Steam reforming of glycerol into hydrogen over nano-size Ni-based hydrotalcite-like catalysts

Steam reforming (SR) of glycerol for the production of hydrogen was investigated over the nano-sized Ni-based catalysts. The Ni-based catalysts were prepared by solid phase crystallization and impregnation methods, and characterized by N2 physisorption, CO chemisorption, XRD, SEM, and TEM techniques. The Ni/gamma-Al2O3 catalyst showed higher conversion and H2 selectivity. However, it was slowly deactivated due to the carbon formation on the surface of catalyst and the sintering. It was found that the Ni based hydrotalcite-like catalyst (spc-Ni/MgAl) showed higher catalytic activity to prevent carbon formation than Ni/gamma-Al2O3 catalyst in the SR of glycerol.     

The development of a CAD environment to determine the preferred build-up direction for layered manufacturing

Stereolithography is a process used to produce polymer components rapidly directly from a computer representation of the part. There are several factors to be considered in order to make efficient use of the process. In particular, the build-up orientation of the part critically affects the part accuracy, the total build time and the volume of the support structures. The purpose of this study is to determine the optimal build-up part orientation for the StereoLithography Apparatus (SLA) process to improve part accuracy, and minimise the total build time and the volume of the support structure. Additionally, an algorithm is developed to calculate the staircase area, quantifying the process errors by the volume of materials supposed to be removed or added to the part, and the optimal layer thickness for the SLA system which can handle the variable layer thickness. Thus, the optimal part orientation is determined based on the user's selections of primary criteria and the optimal thickness of layers is calculated for any part orientation.     

A study on the ballistic damage tolerance design of aircraft structure from armor piercing bullet hits

A damage reference database from armor piercing bullet hits was established for tube and plate specimens with different thicknesses. The penetration damage diameters of the tube specimens showed larger at the center than the periphery in the front, but they resulted larger at the periphery than the center in the rear. As the angle of attack of the plate specimens increased, the penetration damage diameters increased as well, with the penetration damage diameters becoming larger in the rear than the front. Using the damage reference database, the fatigue analysis was performed to determine whether the safety requirements for the military aircraft could be met.     

Low‐Temperature Sintering and Piezoelectric Properties of CuO‐Added KNbO3 Ceramics

Dielectric and piezoelectric properties of CuO‐added KNbO₃ (KN) ceramics were investigated. The CuO reacted with the Nb₂O₅, formed a CuO–Nb₂O₅‐related liquid phase during the sintering, and assisted the densification of the KN ceramics at low temperatures. Moreover, some of the Cu²⁺ ions replaced the Nb⁵⁺ ions in the matrix and behaved as a hardener. The dielectric and piezoelectric properties of the KN ceramics were considerably influenced by the relative density. The 1.0 mol% CuO‐added KN ceramic sintered at 960°C for 1.0 h, which showed a maximum relative density, exhibited a high phase angle of 86.9°, P_r of 14.8 μC/cm², and E_c of 1.8 kV/mm. This specimen also exhibited good dielectric and piezoelectric properties: ε^T₃₃/ε_o of 364, d₃₃ of 122 pC/N, k_p of 0.29, and Q_m of 611.     

Atmospheric pollution for trace elements in the remote high-altitude atmosphere in central Asia as recorded in snow from Mt. Qomolangma (Everest) of the Himalayas

A series of 42 snow samples covering over a one-year period from the fall of 2004 to the summer of 2005 were collected from a 2.1-m snow pit at a high-altitude site on the northeastern slope of Mt. Everest. These samples were analyzed for Al, V, Cr, Mn, Co, Ni, Cu, Zn, As, Rb, Sr, Cd, Sb, Pb, and Bi in order to characterize the relative contributions from anthropogenic and natural sources to the fallout of these elements in central Himalayas. Our data were also considered in the context of monsoon versus non-monsoon seasons. The mean concentrations of the majority of the elements were determined to be at the pg g(-1) level with a strong variation in concentration with snow depth. While the mean concentrations of most of the elements were significantly higher during the non-monsoon season than during the monsoon season, considerable variability in the trace element inputs to the snow was observed during both periods. Cu, Zn, As, Cd, Sb, and Bi displayed high crustal enrichment factors (EF(c)) in most samples, while Cr, Ni, Rb, and Pb show high EF(c) values in some of the samples. Our data indicate that anthropogenic inputs are potentially important for these elements in the remote high-altitude atmosphere in the central Himalayas. The relationship between the EF(c) of each element and the Al concentration indicates that a dominant input of anthropogenic trace elements occurs during both the monsoon and non-monsoon seasons, when crustal contribution is relatively minor. Finally, a comparison of the trace element fallout fluxes calculated in our samples with those recently obtained at Mont Blanc, Greenland, and Antarctica provides direct evidence for a geographical gradient of the atmospheric pollution with trace elements on a global scale.     

Enhancement of the dielectric properties of Pb(La,Ti)O3 thin films fabricated by pulsed laser deposition

PLT thin films with a thickness of 600 nm were grown by pulsed laser deposition (PLD) using different laser wavelengths of 355, 532 and 1064 nm, respectively. We have systematically investigated the variation of grain sizes depending on the process condition. A two-step process to grow (Pb_0.72La_0.28)Ti_0.93O₃ (PLT) films was adopted and verified to be useful to enlarge the grain size of the film and to enhance leakage current characteristics. Structural and electrical properties including dielectric constant, ferroelectric characteristics, and leakage current of PLT thin films were shown to be strongly influenced by grain size.     

Beam test of the CsI(Tl) calorimeter for the BELLE detector at the KEK-B factory

We studied the performance of a prototype electromagnetic calorimeter for the BELLE detector at the KEK proton synchrotron for an energy range of 0.25–3.5 GeV. The prototype consisted of an array of 6 × 5 CsI(Tl) crystals with 30 cm length (16.2 radiation lengths) and about 6 cm × 6 cm cross section. The scintillation light of each CsI(Tl) crystal was read out by two large-area PIN photodiodes and charge-sensitive preamplifiers attached at the rear face of the crystal. We measured the energy and position resolution for electrons and the e/π separation for two sets of matrix configurations: one corresponded to the center and the other to the edge of the barrel calorimeter. The overall performance measured by the test proves that the prototype calorimeter is satisfactory for the use in the BELLE detector.