Variability in Transport Properties Regarding Drying Behavior for Blackbutt Timber in New South Wales

Variability is a key issue in the processing of many biological materials, in this case the drying of hardwood timber. This article reports the measurements of variability of the diffusion coefficient (a transport property), the initial moisture content, and the basic density that are relevant to the drying of blackbutt, Eucalyptus pilularis Sm, from northern New South Wales in Australia. The diffusion coefficient was quantified using a mathematical model solving Fick's second law of diffusion for mass transfer, and Fourier's law for heat transfer. The initial moisture content and the basic density were measured using experimental procedures. Specifically, within-tree and between-tree variations are reported. The coefficients of variation of the initial moisture contents and final moisture contents are 0.24 and 0.19, respectively, for within-tree variability. A similar result was found for the amount of between-tree variability. Compensating differences in the diffusion coefficients of the timber boards were a significant reason for the small dispersion of final moisture contents, despite the large variation in initial moisture contents.

An analysis of variance showed that some timber properties were affected by the board positions within trees and between trees. Circumferential and radial effects were significant for the within-tree variability of most transport properties. Moreover, principal components analysis suggested that timber boards with low densities have high initial moisture contents and high diffusion coefficients. A potential reason is that if there is less wood material per unit volume (lower density), then there is more space to be occupied by water (higher initial moisture content), and there is also less resistance to the diffusive transport of moisture (higher diffusion coefficients).     

Contents of volume 46 (1990)

Contents of volume 46 (1990)     

坚不可催的病毒防护

我们都看过一部或两部关于僵尸的电影。某些医疗或化学事故创造出第一个，然后是一批，然后是成千上万几乎不可摧毁的无意识生物。除为剧情上的相似以外，大多数僵尸电影中常见的一个共同点是都有这样的情景。其中一个即将成为僵尸的受害者遇到一个僵尸，这个僵尸是以前一个亲爱的人变成的，因此这个人想“我们亲密的关系和信任所具有的力量可以保护我”，于是没有逃跑或进行防卫。结果是他被变成了另一具僵尸。     

An Efficient Noninteractive Zero-Knowledge Proof System for NP with General Assumptions

We consider noninteractive zero-knowledge proofs in the shared random string model proposed by Blum et al. [5]. Until recently there was a sizable polynomial gap between the most efficient noninteractive proofs for NP based on general complexity assumptions [11] versus those based on specific algebraic assumptions [7]. Recently, this gap was reduced to a polylogarithmic factor [17]; we further reduce the gap to a constant factor. Our proof system relies on the existence of one-way permutations (or trapdoor permutations for bounded provers). Our protocol is stated in the hidden bit model introduced by Feige et al. [11]. We show how to prove that an n -gate circuit is satisfiable, with error probability 1/n ^O(1) , using only O(n lg n) random committed bits. For this error probability, this result matches to within a constant factor the number of committed bits required by the most efficient known interactive proof systems. Received 20 November 1995 and revised 7 October 1996     

Platinum-plated nanoporous gold: An efficient,low Pt loading electrocatalyst for PEM fuel cells

Platinum-plated nanoporous gold leaf (Pt-NPGL) is made by coating a conformal, atomically thin skin of platinum over the high surface area pores of a thin membrane of nanoporous gold. Because Pt loading in Pt-NPGL can be controlled down to 0.01 mg cm⁻² using only simple benchtop chemistry, the material holds promise as a low Pt loading, carbon-free electrocatalyst. Here, we report successful use of Pt-NPGL as a catalyst in proton exchange membrane (PEM) fuel cells. Stable and high performance Pt-NPGL/Nafion membrane electrode assemblies (MEAs) were made using a stamping technique. The performance of Pt-NPGL MEAs is comparable to conventional carbon-supported nanoparticles-based MEAs with much higher loading, generating an output power density of up to 4.5 kW g⁻¹ Pt in our non-optimized test configuration. Correlations between the performance of Pt-NPGL MEAs, the electrochemically accessible surface area, and material microstructure are discussed. Our success in using Pt-NPGL as a fuel cell catalyst suggests that creating precious metals skins over nanoporous metal supports is a viable strategy for designing new catalysts for PEM fuel cells. This promising approach allows tailoring catalytic activity by engineering precious metal/substrate interactions, employs materials with dual functionality acting both as current collector and catalyst, and may avoid the sintering problems plaguing conventional nanoparticle-based catalysts.     

Performance of a concentrating photovoltaic/thermal solar collector

The performance of a parabolic trough photovoltaic/thermal collector with a geometric concentration ratio of 37× is described. Measured results under typical operating conditions show thermal efficiency around 58% and electrical efficiency around 11%, therefore a combined efficiency of 69%. The impact of non-uniform illumination on the solar cells is investigated using purpose built equipment that moves a calibrated solar cell along the line of the receiver and measures short circuit current. The measured illumination flux profile along the length shows significant variation, despite the mirror shape error being less than 1 mm for most of the mirror area. The impact of the illumination non-uniformities due to the shape error, receiver support post shading and gaps between the mirrors is shown to have a significant effect on the overall electrical performance. The flux profile transverse to the receiver length is also investigated. Peak flux intensities are shown to be around 100 suns. The impact on efficiency due to open circuit voltage reduction is discussed.     

Long-term trends and opportunities for managing regional water supply and wastewater greenhouse gas emissions

Greenhouse gas emissions are likely to rise faster than growth in population and more than double for water supply and wastewater services over the next 50 years in South East Queensland (SEQ), Australia. New sources of water supply such as rainwater tanks, recycled water, and desalination currently have greater energy intensity than traditional sources. In addition, direct greenhouse gas emissions from reservoirs and wastewater treatment and handling have potentially the same magnitude as emissions from the use of energy. Centralized and decentralized water supply and wastewater systems are considered for a scenario based upon a government water supply strategy for the next 50 years. Many sources of data have large uncertainties which are estimated following the IPCC Good Practice Guidelines. Important sources of emissions with large uncertainties such as rainwater tanks and direct emissions were identified for further research and potential mitigation of greenhouse gas emissions.     

One-dimensional pattern of Au nanodots by ion-beam sputtering: formation and mechanism

Highly ordered one-dimensional arrays of nanodots, or nanobeads, are fabricated by forming nanoripples and nanodots in sequence, entirely by ion-beam sputtering (IBS) of Au(001). This demonstrates the capability of IBS for the fabrication of sophisticated nanostructures via hierarchical self-assembly. The intricate nanobead pattern ideally serves to identify the governing mechanisms for the pattern formation: nonlinear effects, especially local redeposition and surface-confined transport, are essential both for the formation and the preservation of the one-dimensional order of the nanobead pattern.     

Wind energy for the 1990s and beyond

Electrical power must be available to the consumer in any amount upon demand. Conventional methods of power generation, such as the burning of fossil fuels, hydroelectric plants, and nuclear power plants, have considerable shortcomings. Governmental regulations have increased in quantity and have raised the already rigid standards of producing electric power without further damage to the environment. Electrical power produced by wind energy conversion systems are undergoing extensive research and revitalization as a viable solution to clean air power generation. The basic challenge to scientists and engineers is to develop wind energy conversion systems that produce adequate amounts of power, but at a cost comparable to present conventional methods. This article discusses the background and impact of the modern wind energy conversion system on future power generation.