Exploration of unknown object by active touch of robot hand

This paper proposes a method of exploring the local shape of an unknown object using the force and torque information obtained from active touch. In the first, we present a method to estimate an unknown curvature, using rolling and sliding motion with a force/torque sensor attached to the fingertip of the hand. Then, the normal curvature equation from 2D curvatures is obtained. Finally we present a reconstruction algorithm of local geometry by using a normal curvature equation, which is composed of principal curvatures and principal directions. The method is tested by using a hand-arm system consisting of an industrial robot arm and an anthropomorphic robot hand with 6-axis force/torque sensor. The feasibility of the proposed method is experimentally validated for objects with simple geometries such as cylinder, spheres etc.     

A timing controller embedded driver IC with 3.24‐Gbps eDP interface for chip‐on‐glass TFT‐LCD applications

This paper presents a timing controller embedded driver (TED) IC with 3.24‐Gbps embedded display port (eDP), which is implemented using a 45‐nm high‐voltage CMOS process for the chip‐on‐glass (COG) TFT‐LCD applications. The proposed TED‐IC employs the input offset calibration scheme, the zero‐adjustable equalizer, and the phase locked loop‐based bang‐bang clock and data recovery to enhance the maximum data rate. Also, the proposed TED‐IC provides efficient power management by supporting advanced link power management feature of eDP standard v1.4. Additionally, the smart charge sharing is proposed to reduce the dynamic power consumption of output buffers. Measured result demonstrates the maximum data rate of 3.24 Gbps from a 1.1 V supply voltage with a 7.9‐inch QXGA 60‐Hz COG‐LCD prototype panel and 44% power saving from the display system.     

Inertial effects on cylindrical particle migration in linear shear flow near a wall

Micro-/nanoparticle-based systems are regarded as one of the possible candidates due to the engineerability and multifunctionality to maximize the accumulation of the nano-/microparticle-based drug delivery system on the target. Recent advances in nanotechnology enable the fabrication of diverse particle shapes from simple spherical particles to more complex shapes. The particle dynamics in blood flow and endocytosis characteristics of non-spherical particles change as the non-sphericity effect increases. We used a numerical approach to investigate the particle dynamics in linear shear flow near a wall. We examined the dynamics of slender cylindrical particles with aspect ratio γ = 5.0 in terms of particle trajectory, velocity, and force variation for different Stokes numbers over time. We identified the rotating inertia of particle near a wall as the source of inertial migration toward the wall. The drift velocity of slender cylindrical particles is comparable to that of discoidal particles. We discuss the possibilities and limitations of using slender cylindrical particles as a drug delivery system.     

A study on effects of security risks on acceptance of enterprise cloud service: moderating of employment and non-employment using PLS multiple group analysis

This paper analyzed the effects of security risk factors fit for cloud computing paradigm on the acceptance of enterprise cloud service with intent to illuminate the factors for vitalizing the adoption of corporate cloud services in the future. The acceptance intention was set as a dependent variable. Independent variables were set in reference to the technology acceptance theory. Security risks were categorized into compliance risk, information leakage risk, troubleshooting risk and service discontinuation risk to design a model for analysis.     

Distinct element method analysis of a retaining wall using a steel frame and fill materials

A technique is developed to clearly establish the shear resistance of a cellular structure, retaining wall composed of a steel frame and fill materials with both continuous and discontinuous characteristics. To overcome the limitation of the existing analysis approach based on continuum mechanics, in which the shear behavior and interaction between the frames and fill material of this type of structure are difficult to describe, this paper introduces displacement incremental analysis into the distinct element method. The results obtained by using the proposed approach are compared with experimental results to verify its accuracy. The results show an internal friction angle of fill materials and overburdening load are major factor determining the shear resistance of a retaining wall with a cellular structure type. From the results of the parametric study on the shear behavior of this type of structure, this paper also proposes a shear resistance moment-shear displacement formula for designing a retaining wall with a cellular structure type.     

Measurement feedback control for a class of feedforward nonlinear systems

We propose a measurement feedback controller for a class of feedforward nonlinear systems under sensor noise. The sensor noise has unknown magnitude, frequency, and phase. Our proposed controller is coupled with a low‐pass filter in such a way that the sensor noise is attenuated. We show that the controlled system results in bounded states whose ultimate bounds are inversely proportional to the minimum frequency of the sensor noise. Our result is further generalized to work in a case where the sensor noise is only required to have a Fourier transform with finite energy. Moreover, if the sensor noise enters only at partial states, depending on the location of the sensor noise, the ultimate bounds of the particular states can be made arbitrarily small via the gain factor of the controller. Copyright © 2012 John Wiley & Sons, Ltd.     

Optimal scheduling of a communication channel for the centralized control of a platoon of vehicles

This paper proposes an off-line optimal channel scheduling algorithm for an interconnected vehicle control system. The optimal sequence obtained through the scheduling algorithm provides a switching controller with the best switching order if the controller can access only one plant at each time slot over the shared communication medium. Interconnected systems require the string stability as well as the dynamic stability of each unit. This paper shows that integrating the simple string stable control law with the approximately optimal linear-quadratic (LQ) tracker gives the optimal channel scheduling algorithm.     

A Lyapunov functional approach to robust stability analysis of continuous-time uncertain linear systems in polytopic domains

In this paper, a sufficient linear matrix inequality (LMI) condition is presented for robust stability analysis of continuous-time linear time-invariant (LTI) systems in polytopic domains. The underlying idea behind the proposed approach is to introduce a family of complex functions which map the closed right-hand side of the complex plane into the inside of the closed unit circle centered at the origin. Then, the mapping properties are used to assure that all the eigenvalues of a system are located in the open left-hand side of the complex plane. Examples show the validity of the proposed condition.     

Map building method for urban gas pipelines based on landmark detection

This paper presents a map building method for an in-pipe robot to navigate inside urban gas pipelines autonomously, whose configuration is unknown or partially known. In the first, we explain the reason why the navigation in the pipeline is difficult and then, present a method for obtaining a robot’s posture by using a pipeline’s unique geometrical features. The robot can obtain its heading direction by detecting the standardized geometries of pipe elements. Based on the method, we propose a robot controller consisting of discrete and continuous controllers. The discrete controller is activated by pre-defined events and generates appropriate paths for exploration. The continuous controller receives the desired path and physically moves the robot to the desired path. The method is implemented in an in-pipe robot, called MRINSPECT-V and its effectiveness is validated.