Synthesis of planar inductors in low temperature co-fired ceramic technology

A simple bisection algorithm for the synthesis of planar inductors using a fast electromagnetic analysis algorithm is presented in this work. Both bisection and electromagnetic analysis algorithms are based on a set of heuristic and physical rules obtained from the study of the electromagnetic behavior of these planar devices. With this procedure, the benefits are two fold: (i) the number of iterations is kept moderately low in the synthesis loop, and (ii) the analysis at each iteration step is speed up without compromising accuracy. The algorithm is applied to the development of an inductor library for a low temperature co-fired ceramic process technology.     

Properties and Printability of Inkjet and Screen-Printed Silver Patterns for RFID Antennas

We report the modeling, and geometrical and electrical characterization, of inkjet and screen-printed patterns on different polymeric substrates for use as antennas in radio-frequency identification (RFID) applications. We compared the physical and electrical characteristics of two silver nanoparticle-based commercial inkjet-printable inks and one screen-printable silver paste, when deposited on polyimide (PI), polyethylene terephthalate (PET), and polyetherimide (PEI) substrates. First, the thickness of the inkjet-printed patterns was predicted by use of an analytical model based on printing conditions and ink composition. The predicted thickness was confirmed experimentally, and geometrical characterization of the lines was completed by measuring the root-mean-square roughness of the patterns. Second, direct-current electrical characterization was performed to identify the printing conditions yielding the lowest resistivity and sheet resistance. The minimum resistivity for the inkjet-printing method was 8.6 ± 0.8 μΩ cm, obtained by printing four stacked layers of one of the commercial inks on PEI, whereas minimum resistivity of 44 ± 7 μΩ cm and 39 ± 4 μΩ cm were obtained for a single layer of screen-printed ink on polyimide (PI) with 140 threads/cm mesh and 90 threads/cm mesh, respectively. In every case, these minimum values of resistivity were obtained for the largest tested thickness. Coplanar waveguide transmission lines were then designed and characterized to analyze the radio-frequency (RF) performance of the printed patterns; minimum transmission losses of 0.0022 ± 0.0012 dB/mm and 0.0016 ± 0.0012 dB/mm measured at 13.56 MHz, in the high-frequency (HF) band, were achieved by inkjet printing on PEI and screen printing on PI, respectively. At 868 MHz, in the ultra-high-frequency band, the minimum values of transmission loss were 0.0130 ± 0.0014 dB/mm for inkjet printing on PEI and 0.0100 ± 0.0014 dB/mm for screen printing on PI. Although the resistivity achieved is lower for inkjet printing than for screen printing, RF losses for inkjetted patterns were larger than for screen-printed patterns, because thicker layers were obtained by screen printing. Finally, several coil inductors for the HF band were also fabricated by use of both printing techniques, and were used as antennas for semi-passive smart RFID tags on plastic foil capable of measuring temperature and humidity.     

The AROUND Architecture for Dynamic Location-Based Services

This paper presents a generic concept of location-based service as an abstraction for supporting the association between computational resources and location. The objective is to extend the advantages of service-based architectures to the development of location-based systems, thus providing a more open and extensible alternative to the vertical approaches typically used in this type of system. The novel AROUND architecture is proposed as an approach for supporting location-based services in the Internet environment. AROUND provides a service location infrastructure that allows applications to select services that are specifically associated with their current location. The architecture includes a flexible scope model that defines the association between services and location, and a service location infrastructure organised by spatial criteria and optimised for location-based queries. Based on a prototype implementation of this architecture, we have developed two case studies that illustrate the use of this approach for developing location-based systems. The overall results provide a valuable insight into the applicability of the architecture, and suggest that this model of location-based services can provide a useful approach for the development of a wide range of location-based applications.     

The multiscale hermite transform for local orientation analysis.

The efficient representation of local differential structure at various resolutions has been a matter of great interest for adaptive image processing and computer vision tasks. In this paper, we derive a multiscale model to represent natural images based on the scale-space representation: a model that has an inspiration in the human visual system. We first derive the one-dimensional case and then extend the results to two and three dimensions. The operators obtained for analysis and synthesis stages are derivatives of the Gaussian smoothing kernel, so that, for the two-dimensional case, we can represent them either in a rotated coordinate system or in terms of directional derivatives. The method to perform the rotation is efficient because it is implemented by means of the application of the so-called generalized binomial filters. Such a family of discrete sequences fulfills a number of properties that allows estimating the local orientation for several image structures. We also define the discrete counterpart in which the coordinate normalization of the continuous case is approximated as a subsampling of the discrete domain.     

Autogestion de Réseaux de Capteurs Sans Fil : Services, Fonctions, Modèles et Étude de Cas

The wireless sensor networks (Wsn) are a novel technology that has appeared after great advancements in the development of intelligent sensors, powerful microprocessors, and communication protocols, their basic components. This kind of network is composed by hundreds to thousands of elements and has the objective of data collecting, processing, and disseminating to a point of interest. The network elements, named sensors nodes, have small dimensions and resource restrictions, especially the energy, the processing, and the communication capacities. It is expected that theWsn are intelligent, autonomic, and context aware. To reach such an objective, they are supposed to perform the management of themselves, i.e., be self-managed. In this article, we propose a management solution for such a sort of network, based on the autonomic computing paradigm. In order to show that self-management can improve the productivity of the network and control the quality of the provided services, we present a case study of a heterogeneous and hierarchicWsn that collects and disseminates data continuously.     

A data mining approach to classify serum creatinine values in patients undergoing continuous ambulatory peritoneal dialysis

Wireless Networks - Continuous ambulatory peritoneal dialysis (CAPD) is a treatment used by patients in the end-stage of chronic kidney diseases. Those patients need to be monitored using blood...     

Lethal effect of electric fields on isolated ventricular myocytes

Defibrillator-type shocks may cause electric and contractile dysfunction. In this study, we determined the relationship between probability of lethal injury and electric field intensity ($E$ ) in isolated rat ventricular myocytes, with emphasis on field orientation and stimulus waveform. This relationship was sigmoidal with irreversible injury for $E ≫ hbox{50 V/cm}$ . During both threshold and lethal stimulation, cells were twofold more sensitive to the field when it was applied longitudinally (versus transversally) to the cell major axis. For a given $E$, the estimated maximum variation of transmembrane potential ( $Delta V_{max }$) was greater for longitudinal stimuli, which might account for the greater sensitivity to the field. Cell death, however, occurred at lower maximum $Delta V_{max }$ values for transversal shocks. This might be explained by a less steep spatial decay of transmembrane potential predicted for transversal stimulation, which would possibly result in occurrence of electroporation in a larger membrane area. For the same stimulus duration, cells were less sensitive to field-induced injury when shocks were biphasic (versus monophasic). Ours results indicate that, although significant myocyte death may occur in the $E$ range expected during clinical defibrillation, biphasic shocks are less likely to produce irreversible cell injury.      

An 8-Bit Digitally Controlled Programmable Phase Shifter Circuit for Sinusoidal Signals with 252∘ Phase Control Range

In this paper, the synthesis, design, and implementation of a programmable phase shifter circuit for sinusoidal signals is presented. The proposed circuit, built-up herein with operational amplifiers (OPAMPs), high precision resistors and low voltage switches, consists of a digitally controlled amplitude attenuator in combination with a single-tone orthogonalizer. Experimental results agree with theoretical background: the attained phase range was 252^° in 256 steps with a median step of 0.9^°. The inaccuracy of the circuit was determined to be of 0.03 %. Contrary to other OPAMP approaches for sinusoidal signals reported in the literature and based on a first-order all-pass filter structure, the approximation suggested in this work is based on a different concept. The achieved results demonstrate the functionality of the system for the case of a sinusoidal signal with frequency of 1 kHz. Notwithstanding, the proposed architecture can be extended to operate at higher frequencies by using different building blocks with larger bandwidth. Furthermore, it can be extended as well to work out with other periodic input waveforms, like triangular shapes or square waves, with the use of an appropriate orthogonalizer.