An extended access control model for permissioned blockchain frameworks

Wireless Networks - In distributed environment, a digital transaction or operation requires transparency and trust among multiple stakeholders. Several approches address such...     

IDEA and AES, two cryptographic algorithms implemented using partial and dynamic reconfiguration

In this work, we present our experience in implementing two different cryptographic algorithms in an FPGA: IDEA and AES. Both implementations have been done by means of mixing Handel-C and VHDL and using partial and dynamic reconfiguration in order to reach a very high performance. In both cases, we have obtained very satisfactory results, achieving 27.948 Gb/s in the IDEA algorithm and 24.922 Gb/s in the AES algorithm.     

Environmentally Friendly Graphene Inks for Touch Screen Sensors

Graphene-based materials have attracted significant attention in many technological fields, but scaling up graphene-based technologies still faces substantial challenges. High-throughput top-down methods generally require hazardous, toxic, and high-boiling-point solvents. Here, an efficient and inexpensive strategy is proposed to produce graphene dispersions by liquid-phase exfoliation (LPE) through a combination of shear-mixing (SM) and tip sonication (TS) techniques, yielding highly concentrated graphene inks compatible with spray coating. The quality of graphene flakes (e.g., lateral size and thickness) and their concentration in the dispersions are compared using different spectroscopic and microscopy techniques. Several approaches (individual SM and TS, and their combination) are tested in three solvents (N-methyl-2-pyrrolidone, dimethylformamide, and cyrene). Interestingly, the combination of SM and TS in cyrene yields high-quality graphene dispersions, overcoming the environmental issues linked to the other two solvents. Starting from the cyrene dispersion, a graphene-based ink is prepared to spray-coat flexible electrodes and assemble a touch screen prototype. The electrodes feature a low sheet resistance (290 Ω □⁻¹) and high optical transmittance (78%), which provide the prototype with a high signal-to-noise ratio (14 dB) and multi-touch functionality (up to four simultaneous touches). These results illustrate a potential pathway toward the integration of LPE-graphene in commercial flexible electronics.     

Lossless video compression based on backward adaptive pixel-based fast motion estimation

This paper presents a lossless video compression system based on a novel Backward Adaptive pixel-based fast Predictive Motion Estimation (BAPME). Unlike the widely used block-matching motion estimation techniques, this scheme predicts the motion on a pixel-by-pixel basis by comparing a group of past observed pixels between two adjacent frames, eliminating the need of transmitting side information. Combined with prediction and a fast search technique, the proposed algorithm achieves better entropy results and significant reduction in computation than pixel-based full search for a set of standard test sequences. Experimental results also show that BAPME outperforms block-based full search in terms of speed and entropy. We also provide the sub-pixel version of BAPME as well as integrate BAPME in a complete lossless video compression system. The experimental results are superior to the selected state-of-the-art schemes.     

A triple-mode hexa-standard reconfigurable TI cross-coupled ΣΔ modulator

Hardware reconfigurability is an attractive solution for modern multi-standard wireless systems. This paper analyses the performance and implementation of an efficient triple-mode hexa-standard reconfigurable sigma-delta (∑?) modulator designed for six different wireless communication standards. Enhanced noise-shaping characteristics and increased digitisation rate, obtained by time-interleaved cross-coupling of ∑? paths, have been utilised for the modulator design. Power/hardware efficiency and the capability to acclimate the requirements of wide hexa-standard specifications are achieved by introducing an advanced noise-shaping structure, the dual-extended architecture. Simulation results of the proposed architecture using Hspice shows that the proposed modulator obtains a peak signal-to-noise ratio of 83.4/80.2/67.8/61.5/60.8/51.03 dB for hexa-standards, i.e. GSM????????/Bluetooth/GPS/WCDMA/WLAN/WiMAX standards with significantly less hardware and low operating frequency. The proposed architecture is implemented in 45 nm CMOS process using a 1 V supply and 0.7 V input range with a power consumption of 1.93 mW. Both architectural- and transistor-level simulation results prove the effectiveness and feasibility of this architecture to accomplish multi-standard cellular communication characteristics.     

Joint optimization of delay and congestion in wavelength-routed optical networks using genetic algorithms

A new multipurpose genetic algorithm, based on Pareto optimality, is proposed to design logical topologies for wavelength-routed optical networks with the aim of minimizing both the congestion and the end-to-end delay. Simulation results show its efficiency when compared with other previously proposed algorithms, achieving in most cases optimal or near-optimal solutions, and in less time than other methods. Moreover, since the algorithm relies on Pareto optimality, not only does it obtain a single logical topology but a set of them, so that the network designer can easily select the most appropriate one according to the current network requirements.     

Design and implementation of a lightweight online certificate validation service

A PKI (public key infrastructure) provides for a digital certificate that can identify an individual or an organization. However, the existence of a certificate is a necessary but not sufficient evidence for its validity. The PKI needs to provide applications that use certificates with the ability to validate, at the time of usage, that a certificate is still valid (not revoked). One of the two standard protocols to check the revocation status of certificates is the Online Certificate Status Protocol (OCSP). In this article, we propose an OCSP-based implementation that enhances the performance of standard OCSP. In particular, we put special emphasis on those issues that affect security and performance when the validation service is deployed in a real scenario. Finally, we provide experimental results that show that our implementation outperforms standard OCSP.     

Long‐Term Structural Evolution of an Intercalated Layered Semiconductor

Intercalated molecules can dramatically modify the electronic band structure of layered semiconductors, significantly altering the optical properties of the material. In the layered monochalcogenide Gallium Telluride (GaTe), exposure to air induces a nearly 1 eV reduction of its band gap due to the interlayer diffusion and chemisorption of oxygen. The effect of oxygen chemisorption at the Te‐terminated surfaces on the structure of GaTe, however, is much less known. To better understand the structure–property relationship of intercalated GaTe, a systematic, long‐term, X‐ray diffraction study has been performed on GaTe exfoliated crystals exposed to ambient conditions. It is observed that the structural changes are not limited to a previously observed short‐term increase in lattice expansion. Over the course of months and even years after exfoliation, the oxygen adsorbates continue to modify the structure of GaTe, inducing significant disorder and grain reorientation. It is estimated that approximately one out of every two grains is slightly displaced by the intercalating oxygen, demonstrating a significant increase in grain mosaicity, while still maintaining the original {?2 0 1} out‐of‐plane texture. Correlating these structural transformations to observed changes in electrical and optical properties will enable capitalization of the use of adsorbates to engineer novel properties in these layered materials.