Return Link Systems for Wireless Mobile Camera Using 42 GHz-Band with Frequency and Space Diversity Techniques

In this paper, return link systems for wireless mobile camera using 42 GHz-band in multipath fading environments are proposed. The return link systems for wireless mobile camera require wireless transmission with high reliability as same as the conventional wired camera systems. The proposed return link systems achieve transmission with high reliability by taking into consideration frequency and space diversity techniques. The proposed systems can be classified as 3 three types of return link systems according to diversity techniques： FD （frequency diversity） systems, SD （space diversity） systems and FD＋SD system （frequency and space diversity）. Computer simulations are carried out in order to confirm the effectiveness of the proposed return link systems. It is confirmed that the proposed three types of return link systems have an advantage about BER performances and effectively exploit frequency and space resources.     

Burning Rate Augmentation of BAMO Based Propellants

Thermal decomposition and the burning properties of BAMO based propellants with HMX or AN/HMX have been investigated. The heat generated by the azide binder decomposition initiated and accelerated the thermal decomposition of HMX and AN. Ammonium perchlorate (AP) and lead stearate with carbon black significantly altered the mechanisms of the thermal decomposition and the burning properties of the HMX based propellants. AP showed an increase in burning rate with a slight decrease in burning rate pressure exponent. The lead catalyst yielded high value of the burning rate with the lowest pressure exponent. The ammonium dichromate also influenced the mechanisms of the thermal decomposition and the burning properties of the AN/HMX samples. The combination of ammonium dichromate and copper chromite was the most effective on the burning rate augmentation of AN/HMX based propellants. AN sublimed and evaporated from the condensed phase and mainly reacted exothermically in the gas phase HMX and AN/HMX based propellants showed smokeless burning characteristics in the small rocket motor combustion tests.     

A molten metal jet impingement on a flat spreading surface

ABSTRACT

In the event of a severe accident, past experiences such as Three Mile Island and Fukushima Daichi have shown that the reactor core of a light-water nuclear reactor, if not properly safeguarded, could go through a meltdown. This will be followed by the formation of a corium, a mix of molten fuel elements, and liquid metals from the Reactor Pressure Vessel (RPV). In the worst-case scenario, a melt through from the RPV can occur and lead to the spreading of the corium, in the form of a molten element’s jet impinging on a flat concrete structure of the Primary Containment Vessel (PCV). To enhance the decommissioning and the safety procedure, scope of the present article is to deepen the understanding of the phenomena involved in the mentioned scenario, mainly jet-instability and molten material spreading. In the present study, experiments were carried out, by using corium simulant materials such as Copper and Tin, to investigate the link between the instability of the gravity-driven molten metal jet and the impinging followed by its spreading over a flat area.     

Determination of hyoscyamine and scopolamine in serum and urine of humans by liquid chromatography with tandem mass spectrometry

A simple method was developed for the analysis of hyoscyamine and scopolamine in human serum and urine using liquid chromatography with tandem mass spectrometry (LC/MS/MS). Hyoscyamine and scopolamine in serum and urine were cleaned up with an Oasis HLB cartridge and a PSA cartridge. The LC separation was carried out on an ODS column, using linear gradient elution with 5 mmol/L IPCC-MS3-methanol as the mobile phase. The mass spectral acquisition was done in the positive ion mode by applying selected reaction monitoring (SRM). The recoveries of hyoscyamine and scopolamine were 86.0-105% from human serum and urine fortified at 0.2 ng/mL and 10 ng/mL. The detection limits of hyoscyamine and scopolamine were 0.02 ng/mL. Four serum and three urine samples of humans poisoned by eating Datura innoxia Mill. were analyzed by this method. Hyoscyamine and scopolamine were detected at the levels of 0.45-3.5 ng/mL in all serum samples and 170-670 ng/mL in all urine samples.     

Identification of genes from Aspergillus oryzae that are preferentially expressed in membrane-surface liquid culture

We identified 22 genes from Aspergillus oryzae that are preferentially expressed in membrane-surface liquid culture (MSLC), among which Ser/Thr protein kinase (aopk1) and phosphatase (aoppt) genes were cloned. We also revealed that aopk1 encodes a protein with an N-terminal sequence 150 amino acid residues longer than that predicted from the registered sequence in GenBank.     

Contamination levels of PCDDs, PCDFs and Co-PCBs in commercial baby foods in Japan

To examine dioxin contamination in commercial baby foods in Japan, congener analyses of polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs) and coplanar polychlorinated biphenyls (Co-PCBs) were performed on 102 varieties of baby foods obtained from supermarkets in 2001-2002. The toxic equivalent quantity (TEQ) levels for dioxins in samples ranged from < 0.001 to 0.135 pg-TEQ/g wet weight when undetected or trace levels of congeners were taken as zero. Among 102 samples tested, 26 samples exceeded 0.010 pg-TEQ/g. The highest TEQ value was for "sardine, vegetables" (0.135 pg-TEQ/g), followed by "Japanese radish (daikon), sardine" (0.080 pg-TEQ/g). Thus, dioxins were detected at low levels in baby foods containing animal products such as fishes and/or dairy products.     

The Complete Loss of p53 Expression Uniquely Predicts Worse Prognosis in Colorectal Cancer

p53 immunohistochemistry is considered an accurate surrogate marker reflecting the underlying TP53 mutation status and has utility in tumor diagnostics. In the present study, 269 primary CRCs were immunohistochemically evaluated for p53 expression to assess its utility in diagnostic pathology and prognostication. p53 expression was wild-type in 59 cases (23%), overexpressed in 143 cases (55%), completely lost in 50 cases (19%), and cytoplasmic in 10 cases (4%). p53 immunoreactivity was associated with tumor size (p = 0.0056), mucus production (p = 0.0015), and mismatch repair (MMR) system status (p < 0.0001). Furthermore, among CRCs with wild-type p53 expression, a significantly higher number of cases had decreased CDX2 than those with p53 overexpression (p = 0.012) or complete p53 loss (p = 0.043). In contrast, among CRCs with p53 overexpression, there were significantly fewer ALCAM-positive cases than p53 wild-type cases (p = 0.0045). However, no significant association was detected between p53 immunoreactivity and the “stem-like” immunophenotype defined by CDX2 downregulation and ALCAM-positivity. Multivariate Cox hazards regression analysis identified tubular-forming histology (hazard ratio [HR] = 0.17, p < 0.0001), younger age (HR = 0.52, p = 0.021), and female sex (HR = 0.55, p = 0.046) as potential favorable factors. The analysis also revealed complete p53 loss (HR = 2.16, p = 0.0087), incomplete resection (HR = 2.65, p = 0.0068), and peritoneal metastasis (HR = 5.32, p < 0.0001) as potential independent risk factors for patients with CRC. The sub-cohort survival analyses classified according to chemotherapy after surgery revealed that CRC patients with wild-type p53 expression tended to have better survival than those with overexpression or complete loss after chemotherapy. Thus, immunohistochemistry for p53 could be used for the prognostication and chemotherapy target selection of patients with CRC.     

Study on the fabrication of a SU-8 cantilever vertically-allocated in a closed fluidic microchannel

Microsystem Technologies - This paper describes the fabrication of a vertically-allocated SU-8 cantilever in a closed fluidic channel. The difficulties to fabricate the vertically-allocated SU-8...     

JSFR key technology evaluation on fuel handling system

A simplified fuel handling system design for the demonstration Japan sodium-cooled fast reactor (JSFR) has been proposed. Fast Reactor Cycle Technology Development project phase I results of key technology evaluations on a pantograph fuel handling machine (FHM), a fuel transfer pot with two core component positions, dry spent fuel cleaning and minor actinide-bearing fresh fuel shipping cask are summarized. A full-scale FHM mockup has been fabricated and tested in the air accumulating performance and seismic tolerance data. A mockup fuel transfer pot with fins and chromium carbide coating has been fabricated and tested with sodium accumulating heat transfer performance data. Several sodium cleaning tests using a dummy subassembly has been conducted accumulating cleaning performance data. For fresh fuel shipping cask, a design tool for evaluation of heat transfer capability has been developed and a helium gas cask shows cooling capability of minor actinide-bearing fresh fuel. Those experimental and analytical efforts have shown that key technologies to develop simplified fuel handling system are matured enough to proceed large-scale sodium experiments and conceptual design study for the demonstration JSFR.