Microencapsulation of bioactive compounds from mulberry (Morus alba L.) leaf extracts by protein–polysaccharide interactions

Mulberry leaf extracts were generated using four concentrations of ethanol (50%, 60%, 70%, and 95% v/v). A 60% ethanolic mulberry leaf extract (60E) yielded a high total phenolic content (TPC) and antioxidant activity using 1, 1‐diphenyl‐2‐picrylhydrazyl (DPPH) radical scavenging and a ferric reducing antioxidant power (FRAP) assay. Coating materials were derived using a combination of soy protein isolates (SPI) and low methoxyl (LM) pectin in a 1:1 ratio. The effect of various parameters on microencapsulation, such as pH (3.5, 4.0, and 4.5) and the concentration of coating materials (2.5, 5.0 and 7.5% w/v), was studied. Microcapsules produced using 60E as a core material at pH 4.0 with 7.5% of coating material showed a high encapsulation yield, encapsulation efficiency, TPC and antioxidant activity.     

Thermodynamic Properties of Ionic Semiclathrate Hydrate Formed with Tetrabutylammonium Propionate

The phase equilibrium temperature and dissociation heat of tetrabutylammonium propionate (TBAPr) hydrate are reported. TBAPr hydrate is a type of ionic semiclathrate hydrates and also could potentially be used as thermal energy storage material. The temperature‐composition phase diagram of the TBAPr hydrate was determined in a defined range of mass fractions. Considering the dissociation heat of differential scanning calorimetry (DSC) measurements, multiple peaks of heat flow were observed in the TBAPr‐water system at the TBAPr mass fraction lower than 0.35, and there was a single peak at the mass fraction higher than 0.37.     

Interlaminar Fracture Testing Method for CFRP Using Tensile Loading with Acoustic Emission Analysis

A method is described to characterize the uniformity of interlaminar fracture toughness of laminated carbon-fiber-reinforced polymer (CFRP) composites fabricated by the modified vacuum assisted resin transfer molding process. To prepare specimens for Mode I fracture toughness tests, pieces were sectioned from the inlet and vent regions of a CFRP plate ([+30/-30]₆), with a starter crack inserted. The specimens were packed between two rectangular epoxy plates to apply a load using a universal testing machine. Acoustic energy signals were monitored using two sensors attached to the epoxy plates during tensile loading. The difference between the material properties of specimens from the inlet and vent regions of the CFRP plate were statistically compared using one-way analysis of variance (ANOVA); we show that the specimens showed no statistically significant differences in the interlaminar fracture characteristics depending on the part of the mold from which they were taken.     

Selection of injection conditions for aluminum particles as a raw material by numerical analysis in the synthesis of ultrafine particles with transferred type arc plasma

We investigated by numerical analysis the dependence of vaporization behavior of aluminum particles injected into transferred type arc plasma on injection conditions in synthesis of aluminum nitride ultra fine particles. On the basis of calculation results, we chose one proper injection condition where aluminum particles vaporized more. © 2009 Wiley Periodicals, Inc. Electr Eng Jpn, 170(2): 46–52, 2010; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20852     

Measurement method of plasma current and density in atmospheric pressure plasma jet

We present a measurement method of the plasma current and density in an atmospheric‐pressure plasma generated using a quartz tube, helium gas, and copper foil electrode by applying a high RF voltage. The plasma in the form of a bullet is released as a plume or jet into the atmosphere. To study the characteristics of the atmospheric‐pressure plasma, the plasma current is measured using a current probe, and the drift velocity of plasma plume is measured using a photodetector. The current of the plasma plume is estimated by subtracting the ground line current from the power line current in the circuit. The density of plasma plume n is estimated from the plasma plume current I and the drift velocity v as I = envS, where S is the cross section of plasma plume. The density of the released plasma into the atmosphere is estimated as ∼10¹⁸ m⁻³ by the method. © 2015 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Selective preparation of oligomeric naphthylene ether and its applications to epoxy resin for silicon carbide power semiconductor device materials

In this study, a novel method for selective synthesis of naphthylene ether trimers by self‐condensation of 2,7‐dihydroxynaphthalene in the presence of catalytic amount of potassium hydroxide was reported. An epoxy resin from the trimers was prepared and properties of the cured epoxy resin were examined. The cured resin showed not only good physical thermal stability, such as high glass transition temperature and low thermal expansion coefficient, but also good chemical thermal stability like high thermal decomposition temperature. Additionally, low moisture absorption of the cured resin was confirmed. From these results, the newly prepared epoxy resin with naphthylene ether skeletons was considered to be suitable for advanced applications such as silicon carbide power semiconductor device. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43339.     

Characterization of alternative plasticizers in poly(vinyl chloride) sheets for blood containers

This study aimed to optimize the ratio of dioctyl 4‐cyclohexene‐1,2‐dicarboxylate (DOTH) and di‐isononyl‐cyclohexane‐1,2‐dicarboxylate (DINCH^®) for use as plasticizers in poly(vinyl chloride) (PVC) sheets. We also evaluated the biological safety of DOTH for its potential to be part of a safe PVC‐based blood container. The suppression of hemolysis in mannitol‐adenine‐phosphate / red cell concentrates (MAP/RCC) with DOTH/(DINCH^®‐PVC) sheets and the elution of plasticizers from the sheets increased with higher DOTH compositions. The properties of the PVC sheet containing DOTH and DINCH^® in the ratio of 25:33 parts against PVC 100 parts as a weight were almost identical to the PVC sheet made of di(2‐ethylhexyl) phthalate. From a subchronic toxicity test, DOTH did not show any adverse effects on all organs, including the testes, epididymis, liver, and kidneys. The no‐observed‐adverse‐effect level was 300 mg/kg body weight/day in a rat. These results suggest that DOTH/DINCH^® (25:33) is a promising candidate for the replacement of di(2‐ethylhexyl) phthalate in blood containers. J. VINYL ADDIT. TECHNOL., 22:520–528, 2016. © 2015 Society of Plastics Engineers