Stereocomplex formation between enantiomeric poly(lactic acid). VIII. Complex fibers spun from mixed solution of poly(D-lactic acid) and poly(L-lactic acid)

To obtain poly(lactic acid) (PLA) complex fibers, spinning was performed by wet and dry methods from 5–10 g/dL chloroform solutions of poly(D-lactic acid) (PDLA) and poly(L-lactic), both with a viscosity-average molecular weight of 3 × 10⁵. The dope was extruded from a monohole nozzle into coagulation baths from ethanol and chloroform for wet spinning and into a drying column kept at 60°C for dry spinning. Scanning electron microscopic observation of the as-spun fibers showed that the surface of the wet-spun fiber had large basins with diameters of 50–100 μm and many pores with diameters from sub μm to 10 μm, whereas the surface of dry-spun fiber had a microporous structure with the pore diameter of 1–3 μm. The tensile strength of the wet-spun complex fiber was very low and could not be drawn at high temperatures, in contrast to the dry-spun fiber. The tensile strength of dry-spun complex fiber increased upon hot drawing and showed the tensile strength of 94 kg/mm² by drawing at 160°C to the draw ratio of 13. Differential scanning calorimetry revealed that the complex fibers contained both the stereocomplex crystallites (racemic crystallites) and the crystallites of the single polymers, PDLA and PLLA, regardless of the spinning methods. The ratio of the racemic crystallites to the single-polymer crystallites increased with the draw ratio of the complex fiber. © 1994 John Wiley & Sons, Inc.     

Deterioration of diacylglycerol‐ and triacylglycerol‐rich oils during frying of potatoes

The stabilities of a commercial diacylglycerol‐rich oil (DAG) and a salad oil (TAG) that had been prepared from a mixture of rapeseed and soybean oils were compared while frying potatoes at 180 °C for 3 h. The representative chemical and physical characteristics of the oils were assessed before and after frying, together with the amount of volatile aldehydes in the exhaust of frying. Among the deterioration indications, the carbonyl value, polymer content, and residual polyunsaturated fatty acid content were similar and not significantly different between the TAG and DAG. On the other hand, the characteristics relating to free fatty acids, i.e. the acid value and emission of chemiluminescence at 100 °C, were greater and the smoke and flash points were lower in the DAG than in the TAG. An irritating odor was generated from the DAG after 1 h of frying and got stronger as frying continued. These results suggested that DAG more easily forms free fatty acids under frying conditions than TAG.     

Effect of steric hindrance on hydrogen‐bonding interaction between polyesters and natural polyphenol catechin

The phase behaviors for the blends of poly(3‐hydroxypropionate) (PHP), poly(L ‐lactide) (PLLA), poly(D ‐lactide) (PDLA), and poly(D,L ‐lactide) (PDLLA) with catechin were investigated by differential scanning calorimetry. In PLLA/catechin, PDLA/catechin, and PDLLA/catechin blends, two glass transitions were detected when the catechin content was ≥40 wt %, whereas in PHP/catechin blends only one glass transition was observed over the whole range of blend compositions. The former and the latter results should reflect the inhomogeneous and the homogeneous nature of the blends, respectively, in the amorphous phase. These different phase behaviors should arise from the differences in the chemical structures between PHP and PLLA/PDLA/PDLLA, which dominates the strength and the number of intermolecular hydrogen‐bonding interactions between the ester carbonyl groups of polyesters and the phenol groups of catechin. As detected by FTIR spectroscopy, in comparison with PHP, the steric hindrance of side‐chain methyl groups of PLLA, PDLA, and PDLLA might restrain the formation of hydrogen bonds between their ester carbonyl groups and the phenol hydroxyl groups of catechin, even weakening the strength of such hydrogen bonds. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 3565–3573, 2004     

Molecular breeding of cellulolytic microbes, plants, and animals for biomass utilization

Cellulosic materials are the major components of fibrous biomass produced as a result of photosynthesis and are considered as a reservoir of solar energy and organic materials. In order to cope with the problems of food and energy shortages expected in the near future, biotechnologists are encouraged to develop new technologies for the more effective utilization of the world's sustainable resources, i.e., biomass. One way is to engineer microorganisms and animals with the capability of digesting and utilizing cellulosic materials, and plants which can be easily degraded by cellulolytic enzymes. In this article, we summarize recent studies on the molecular breeding of cellulolytic organisms for biomass utilization along with some considerations regarding cellulolytic enzymes.     

Cloning, sequencing and expression of an alpha-L-arabinofuranosidase from Aspergillus sojae

The arabinofuranosidase gene was cloned from the cDNA of Aspergillus sojae. It was found to contain an open reading frame composed of 984 base pairs (bp) and to encode 328 amino acid residues (aa). The cDNA sequence suggested that the mature enzyme is preceded by a 26-aa signal sequence and the molecular mass was predicted to be 32,749 Da. The A. sojae arabinofuranosidase consists of a single catalytic domain; it does not have a specific substrate-binding domain such as the xylan-binding domain reported in an arabinofuranosidase from Streptomyces lividans (Vincent, P. et al.: Biochem. J., 322, 845-852, 1997). The deduced amino acid sequence of the catalytic domain of the mature enzyme exhibits extensive identity with the catalytic domains of Streptomyces coelicolor (74%), Aspergillus niger (75%), S. lividans (74%), and Aspergillus tubingensis (75%), which are enzymes that belong to family 62 of the glycosyl hydrolases. The cloned AFdase gene was expressed in Escherichia coli BL21 (DE3) pLysS as a cellulose-binding domain tag fusion protein. The specific activity of the purified recombinant enzyme was 18.6 units/mg protein, which is one-fourth that of the enzyme purified from a solid-state culture of A. sojae.     

Synergistic Extraction of Am(III) and Eu(III) by Tris(2‐pyridylmethyl)Amine with Various Anions in 1,2‐Dichloroethane

The extraction equilibria of Am(III) and Eu(III) by using a tripodal ligand, tris(2‐pyridylmethyl)amine (tpa), with various lipophilic anions have been investigated. The extractability of both Am(III) and Eu(III) was increased by the combination of tpa and counteranions due to a synergistic effect. The separation factors between Am(III) and Eu(III) were also increased from 7.6 to 49 by the combination of counteranions and organic solvents. The extraction equilibria of Am(III) and Eu(III) with tpa in 1,2‐dichloroethane were determined by slope analysis. It was found that three anions and one molecule of the ligand coordinated to Am(III) and Eu(III) was extracted regardless of the anions.     

Design feasibility of a single-mode optical isolator

Isolator conditions are derived by a perturbation method for optical slab isolators in which magnetooptical crystal and anisotropic dielectric crystal films are integrated for reciprocal and non-reciprocal TE-TM mode conversion functions. The general expressions show that isolator conditions can be satisfied for any combination of wavelength, normalized frequency, waveguide thickness, and gyrotropic constant of the magnetooptical crystal by appropriate choice of the magnitude of the birefringence of the top layer film and its crystal orientation angle. Design examples of single-mode isolators with waveguide thicknesses of 4, 4.5, and 5 μm are given at 1.55 μm wavelength. It is also pointed out that isolators of the above design can be fabricated with Y3Fe5O12, Y1.5Gd1.5Fe3O12, and Tm3Fe5O12crystal films as magnetooptical materials and a solid solution of LiNbO3and LiTaO3as an anisotropic film. Tolerance in the required film thickness becomes less stringent with this design. Isolation of more than 20 dB with an insertion loss of less than 0.12 dB is feasible without any parameter adjustment, even when there is as much as a ten percent deviation in the film thickness.     

Efficient synthesis and magnetic properties of triphenylamine bearing three nitronylnitroxide radicals

Improved synthesis and reinvestigation of the magnetic properties of triphenylamine bearing three nitronylnitroxide radicals (1) were carried out. Single crystal X-ray crystallographic analysis of 1 established that its molecular shape had a C₃-symmetry. Our newly prepared 1 showed different physical properties from those of reported. SQUID measurements of 1 showed that each of the three spins of 1 behaved independently at room temperature. In contrast, the three spins coupled antiferromagnetically at lower temperature as low as ca. 1.8 K. These spin behaviors can be explained by a regular triangular antiferromagnetic model (J/k_B = ?3.3 K) and interpreted as a spin frustration system.     

Transient Behavior of Gas Entrainment Caused by Surface Vortex

A compact sodium-cooled reactor is an important candidate as a fast breeder reactor (FBR) and has been investigated in the feasibility study of FBR cycle. Due to the compact sizing of the reactor vessel, gas entrainment at the free surface of sodium coolant becomes one of the significant issues for reactor design, and it is required to clarify the criterion of gas entrainment at free surface and the tolerance. In the present study, some visualization experiments were performed in a water-air system focusing on the gas entrainment due to surface vortex and its transient phenomena. Influences of horizontal velocity were clarified by the visualization. The gas entrainment due to the surface vortex occurs intermittently. Time trends of circulation and length of gas core for the intermittent surface vortices were measured by the particle image velocimetry and visualization. It was found that the gas core length extends with time delay to the increase of circulation around the vortex.