Cathodic Stripping Voltammetry of Selenium(IV) at a Silver Disk Electrode

A new, simple, and reproducible method is described for the determination of selenium(IV) based on differential pulse cathodic stripping voltammetry. The optimized experimental conditions are as follows: selenium(IV) ions in an acidic medium (0.06 M HCl-0.07 M HNO(3)) are electrodeposited on a rotating silver disk electrode as silver selenide at -0.4 V vs SCE for 30 min; the deposit is then cathodically stripped in another solution (2 M NaOH) at a scan rate of 50 mV s(-1) to -1.2 V vs SCE. The cathodic stripping results in only a single well-defined peak at about -0.95 V vs SCE. The calibration (peak height vs selenium concentration) graph is linear up to at least 40 ng mL(-1) of selenium(IV) and passes through the origin, with a relative standard deviation of 2.7% for 20 ng mL(-1) (n = 5). The detection limit (3σ) is 0.20 ng mL(-1). The possible interferences have been evaluated. Dissolved oxygen does not affect the peak height of selenium. The electrode can be used repeatedly at least 20 times with excellent reproducibility without further polishing. The proposed method is an improvement over the existing cathodic stripping techniques.     

Randomly accessible, multilayered optical memory with a Bi(12)SiO(20) crystal

A read-and-write, randomly accessible, multilayered optical memory with a Bi(12) SiO(20) crystal as the medium is demonstrated. Data are recorded in the crystal as an absorption change that is due to the photochromic effect. These data are successfully recorded, read, and selectively erased in five layers in the crystal. The axial-separation distance between neighboring layers is 30 μm, and the lateral distance between bits is 5 μm. Selective bit erasure of the data is accomplished by illumination of the recorded bit datum with He-Ne laser light. To our knowledge, this is the first successful demonstration of the selective optical erasure of the photochromic effect in a BSO crystal.     

Geometrical analysis of an optical fiber bundle displacement sensor

The performance of a multifiber optical lever was geometrically analyzed by extending the Cook and Hamm model [Appl. Opt. 34, 5854-5860 (1995)] for a basic seven-fiber optical lever. The generalized relationships between sensitivity and the displacement detection limit to the fiber core radius, illumination irradiance, and coupling angle were obtained by analyses of three various types of light source, i.e., a parallel beam light source, an infinite plane light source, and a point light source. The analysis of the point light source was confirmed by a measurement that used the light source of a light-emitting diode. The sensitivity of the fiber-optic lever is inversely proportional to the fiber core radius, whereas the receiving light power is proportional to the number of illuminating and receiving fibers. Thus, the bundling of the finer fiber with the larger number of illuminating and receiving fibers is more effective for improving sensitivity and the displacement detection limit.     

A novel interferon regulatory factor family transcription factor, ICSAT/Pip/LSIRF, that negatively regulates the activity of interferon-regulated genes

We have isolated a novel cDNA clone encoding interferon (IFN) consensus sequence-binding protein in adult T-cell leukemia cell line or activated T cells (ICSAT); this protein is the human homolog of the recently cloned Pip/LSIRF. ICSAT is structurally most closely related to the previously cloned ICSBP, a member of the IFN regulatory factor (IRF) family of proteins that binds to interferon consensus sequences (ICSs) found in many promoters of the IFN-regulated genes. Among T-cell lines investigated, ICSAT was abundantly expressed in human T-cell leukemia virus type 1 (HTLV-1)-infected T cells. When the HTLV-1 tax gene was expressed or phorbol myristake acetate-A23187 stimulation was used, ICSAT expression was induced in Jurkat cells which otherwise do not express ICSAT. When the binding of ICSAT to four different ICSs was tested, the relative differences in binding affinities for those ICSs were determined. To study the functional role of ICSAT, we performed cotransfection experiments with the human embryonal carcinoma cell line N-Tera2. ICSAT was demonstrated to possess repressive function over the gene activation induced by IFN stimulation or by IRF-1 cotransfection. Such repressive function is similar to that seen in IRF-2 or ICSBP. However, we have found that ICSAT has a different repressive effect from that of IRF-2 or ICSBP in some IFN-responsive reporter constructs. These results suggest that a novel mechanism of gene regulation by "differential repression" is used by multiple members of repressor proteins with different repressive effects on the IFN-responsive genes.     

Recurrent infomax generates cell assemblies, neuronal avalanches, and simple cell-like selectivity

Recently multineuronal recording has allowed us to observe patterned firings, synchronization, oscillation, and global state transitions in the recurrent networks of central nervous systems. We propose a learning algorithm based on the process of information maximization in a recurrent network, which we call recurrent infomax (RI). RI maximizes information retention and thereby minimizes information loss through time in a network. We find that feeding in external inputs consisting of information obtained from photographs of natural scenes into an RI-based model of a recurrent network results in the appearance of Gabor-like selectivity quite similar to that existing in simple cells of the primary visual cortex. We find that without external input, this network exhibits cell assembly-like and synfire chain-like spontaneous activity as well as a critical neuronal avalanche. In addition, we find that RI embeds externally input temporal firing patterns to the network so that it spontaneously reproduces these patterns after learning. RI provides a simple framework to explain a wide range of phenomena observed in in vivo and in vitro neuronal networks, and it will provide a novel understanding of experimental results for multineuronal activity and plasticity from an information-theoretic point of view.     

A cross-junction channel valveless-micropump with PZT actuation

A gas-jet micro pump with novel cross-junction channel has been designed and fabricated using a Si micromachining process. The valveless micro pump is composed of a piezoelectric lead zirconate titanate (PZT) diaphragm actuator and fluidic network. The design of the valveless pump focuses on a cross-junction formed by the neck of the pump chamber and one outlet and two opposite inlet channels. The structure of cross-junction allows differences in fluidic resistance and fluidic momentum inside the channels during each PZT diaphragm vibration cycle, which leads to the gas flow being rectified without valves. The flow channels were easily fabricated by using silicon etching process. To investigate the effects of the structure of the cross-junction on the gas flow rate, two types of pump with different cross-junction were studied. The design and simulation were done using ANSYS-Fluent software. The simulations and experimental data revealed that the step-nozzle structure is much more advantageous than the planar structure. A flow rate of 5.2 ml/min was obtained for the pump with step structure when the pump was driven at its resonant frequency of 7.9 kHz by a sinusoidal voltage of 50 V_p–p.     

New pixel driving circuit using self‐discharging compensation method for high‐resolution OLED micro displays on a silicon backplane

A new 4T2C pixel circuit formed on a silicon substrate is proposed to realize a high‐resolution 7.8‐μm pixel pitch AMOLED microdisplay. In order to achieve high luminance uniformity, the pixel circuit compensates its Vth variation of the MOSFET for the driving transistor internally by using self‐discharging method. Also presented are 0.5‐in Quad‐VGA and 1.25‐in wide Quad‐XGA microdisplays with the proposed pixel circuit.     

Fundamental characteristics of printed gelatin utilizing micro 3D printer

Gelatin is useful for biofabrication, because it can be used for cell scaffolds and it has unique properties. Therefore, we attempted to fabricate biodevices of gelatin utilizing micro 3D printer which is able to print with high precision. However, it has been difficult to fabricate 3D structure of gelatin utilizing 3D printer, because a printed gelatin droplet on the metal plate electrode would spread before solidification. To clear this problem, we developed a new experimental set-up with a peltier device that can control temperature of the impact point. At an impact point temperature of 80 °C, the spreading of printed gelatin droplets was prevented. Therefore, we were able to print a ball gelatin. In addition, we were able to print a narrower gelatin line than at an impact point temperature of 20 °C.     

Temperature-controlled molecular dynamics study on velocity-dependent threshold behavior of dynamic nano-friction

Laws of dynamic nano-friction (i.e., continuous wearless friction) were searched for under steady spatial distributions of the local quasi-temperature, by molecular dynamics (MD) simulations. The temperature control of the non-conservative model was carried out by extending the isothermal MD method using the Nosé–Poincaré thermostat. The results suggested that the threshold phenomenon characterizes sliding-velocity dependence of the nano-frictional force between crystal lattices constituting a nano-electromechanical system (NEMS). This phenomenon was turned out to be a universal feature, whether heat transfer to the environment exists or not.     

A query model to synthesize answer intervals from indexed videounits

While a query result in a traditional database is a subset of the database, in a video database, it is a set of subintervals extracted from the raw video sequence. It is very hard, if not impossible, to predetermine all the queries that will be issued in the future, and all the subintervals that will become necessary to answer them. As a result, conventional query frameworks are not applicable to video databases. We propose a new video query model that computes query results by dynamically synthesizing needed subintervals from fragmentary indexed intervals in the database. We introduce new interval operations required for that computation. We also propose methods to compute relative relevance of synthesized intervals to a given query. A query result is a list of synthesized intervals sorted in the order of their degree of relevance