Crystallographic analysis for acicular ferrite formation in low carbon steel weld metals

Inclusions contributing to acicular ferrite nucleation were investigated from a crystallographic point of view in low carbon low alloy steelweld metals. The samples from electro slag welding (ESW) and submerged arc welding (SAW) deposits with various cooling rates were prepared in this study. In those samples, intragranular acicular ferrite formation was observed from inclusions. The inclusions contributing to acicular ferrite formation were of multi-phase type consisting of amorphous phase, spinel type and MnS. They were surrounded by a Ti-enriched layer. It was confirmed by selected area diffraction patterns and energy-dispersive X-ray spectrometer analyses that the Ti-enriched layer was TiO. The acicular ferrite had a Baker–Nutting orientation relationship with the TiO layer on the inclusion surface. The misfit was 3.0% at the interface between the acicular ferrite and TiO. Therefore, it is considered that TiO on the inclusion surface contributes to the heterogeneous nucleation of acicular ferrite by small lattice misfit. However, themorphologies of ferrite growth which nucleated from inclusions were different in both samples. Whereas the growth of ferrites nucleated from TiO was enough in ESW, the size of nucleated ferrite in SAW was a few hundred millimetres in size. In the early stage of nucleation from TiO, ferrite had small deviation from Kurdjumov–Sachs orientation relationship (K–S relationship) in both ESW and SAW. However, there was a difference in the growth stage of ferrite. The ferrite orientations were gradually changed to fit to the K–S relationship in ESW. On the other hand, the nucleated ferrite in SAW stopped growing and the newly nucleated ferrite which had K–S relationship prior to austenite was formed adjacently because of large super cooling due to small heat input.     

Effect of REM addition of wire on CO2 gas shielded arc phenomenon

Carbon dioxide (CO₂) gas shielded arc welding is the main arc welding method, but it generates a large amount of spatter during welding. The root cause of spatter lies in the fact that the droplet undergoes repeated irregular shaking. To solve this problem, spatter generation modes were clarified and the effects of polarity and rare earth metal (REM) addition of the wire on CO₂ gas shielded arc welding were investigated. As a result, when welding is performed with an electrode negative (DCEN) polarity using REM added wire, it was found that a conical arc plasma is formed, and the droplet which is transferred from the wire tip to the molten pool is fine and continuous, in what is termed ‘spray transfer’. Thus, spatter generation was reduced to 10% of amount of the conventional CO₂ gas shielded arc welding (from 0.058 to 0.005g/s).     

Development of novel temperature-stable Al2O3–TiO2-based dielectric ceramics featuring superior thermal conductivity for LTCC applications

A new composition was developed using sintering to improve the dielectric properties of low-temperature co-fired alumina (LTCA) containing CuO–TiO₂–Nb₂O₅–Ag₂O. By substituting some alumina with rutile TiO₂, the second-phase compound could be changed from AgNbO₃ to the rutile phase. Further, low-temperature sintering at temperatures below 960 °C was possible, suppressing Al₂TiO₅ formation during firing. The dielectric characteristics, particularly the temperature coefficient of the resonant frequency (τ_f) and Q × f values, were improved without significantly reducing the sinterability and thermal conductivity. The dielectric properties of the developed 88Al₂O₃–12TiO₂-based ceramic were ε_r: 14.7, τ_f: +0.8 ppm/K, and Q × f: 13,383 GHz (at ～10 GHz) at a firing temperature of 940 °C. The thermal conductivity was 18.5 W/mK, which is the highest value for reported temperature-stable low-temperature co-fired ceramics (LTCCs). These results provide one of the key technologies for the practical application of LTCCs with superior thermal conductivities.     

An analysis of the length of hospital stay for cataract patients in Japan using the discrete-type proportional hazard model

We analyze the length of hospital stays of patients hospitalized for cataract and related diseases (Diagnosis Related Groups (DRG) 2041) in Japan, utilizing the data pertaining to 3436 patients on whom one-eye lens operations are performed. We use the discrete-type proportional hazard model to analyze variables that may affect the length of stay.     

Analysis of polymer electrolyte fuel cell performance by electrode polarization model

For development of polymer electrolyte fuel cell (PEFC) lifetime estimation method, a high accuracy PEFC electrode polarization model is required. An electrode polarization model which was previously proposed was verified. However, accuracy of the electrode polarization model was not enough to estimate PEFC performance under various conditions. A new high accuracy PEFC electrode polarization model has been developed based on electrochemical consideration and data observed at elevated pressures. In the cathode polarization model, effects of O₂ diffusion and H₂O plugging have to be considered to obtain high accuracy for long-term operation. In addition, PEFC performance degradation was analyzed by the electrode polarization model. Main factors of PEFC performance degradation are OCV drop, the cathodic activation polarization, voltage drops by O₂ diffusion and H₂O plugging.     

Guided-mode resonant grating filter with an antireflection structured surface

We describe a new structure of guided-mode resonant grating (GMRG) filters with low sideband reflectance. This GMRG filter consists of a high-index thin film on an antireflective structured surface called "moth-eye structure." Since the high-index film undulates along the surface structure, the film acts as a modulated optical waveguide. An incident light wave satisfying a resonant condition is reflected by the GMRG filter, and nonresonant light waves pass through the filter. This GMRG filter is valid for reducing reflection of nonresonant light waves in a wide spectral range. The resonant reflection of this new filter was investigated by numerical calculation based on an electromagnetic grating analysis. In the case of a triangular antireflective surface structure whose thickness is 2x greater than its period, the sideband reflectance for nonresonant light waves was lower than 0.5% for TM-polarized light in a wide range of wavelengths.     

An Interactive Deformation System for Granular Material

Computer Graphics (CG) animations of natural phenomena are currently widely used for movies and in video games. Granular materials occur widely in nature, and therefore it is necessary that CG animations represent ground surfaces composed of a granular material as well as model deformations when the granular material comes into contact with other physical rigid objects (called solid objects). In this paper, we propose a deformation algorithm for ground surfaces composed of granular material. The deformation algorithm is divided into three steps: (1) detection of the collision between a solid object and the ground surface, (2) displacement of the granular material and (3) erosion of the material at steep slopes. The proposed algorithm can handle solid objects of various shapes, including concave polyhedra by additionally using a layered data structure called the Height Span Map. Furthermore, a texture sliding technique is presented to render the motion of granular materials. In addition, our implementation of the deformation algorithm can be used at interactive frame rates.     

Market micro-structure analysis by multiagent simulation in X-Economy -- comparison among technical indices

We are developing an agent and server library referred to as X-Economy, by which we can execute multiagent simulations and network games for financial and economic systems. To this end, we analyzed the characteristics of network games in a financial context and compared them with traditional ones. X-Economy has also provided a new research direction in market micro-structure analysis. We executed several kinds of multiagent simulations for technical traders (indices) and obtained non-trivial suggestions regarding the relationship between the market randomness and the effectiveness of technical indices. For instance, the performance of complex technical indices seemed to deeply depend on the characteristics and nature of a market when a market became complex, i.e. it moved far from the Wiener process.     

Asymmetric addition of thiol to diene polymer in the presence of optically active amines as catalyst

The asymmetric addition reaction of thiolacetic acid or benzylmercaptan to diene polymer (natural rubber, cis- and trans-1,4-polyisoprene, _cis-1,4-polybutadiene, various styrenebutadiene copolymers and alternating acrylonitrile-butadiene copolymer) by optically active catalysts such as d-bornylamine ([α]d?45.2°), l-aspartic diethyl ester (?11.2°), l-aspartic dibutyl ester (?5.3°) were carried out in benzene at room temperature to 90°C. The optically active polymers were obtained from natural rubber and cis-1,4- and trans-1,4-polyisoprene, but were not obtained from cis-1,4-polybutadiene, styrene-butadiene copolymers, and butadiene-acrylonitrile copolymer. The [α]²⁵_D value of optically active derivatives was ?0.1° ～ ?1.0° (in benzene), and the optical rotatory dispersion curves were found to fit the simple Drude equation.