Reappraisal of loading rate effects on sand behavior in view of seismic design for pile foundation

This study re-visits the effects of loading rate on sand behavior in view of seismic design of pile foundation. Based on an extensive literature review covering both element testing and model testing, the paper summarizes the current understanding of the loading rate effects. The paper then describes the development of test apparatus used in this study and presents the data obtained from a series of monotonically increasing triaxial compression tests on Toyoura sand, varying the strain rate in the range of 0.005%/s to 250%/s. A total of 36 tests were conducted on dry and saturated sand, both under drained and undrained conditions with two confining pressures. The experimental results confirm that the soil strength and the soil stiffness increase as the strain rate increase. This paper also concludes that the internal friction angle and deformation modulus increase when the strain rate is high. The implications of the loading rate effect on pile foundation design are then presented.     

Advantage of Sodium Polyoxyethylene Lauryl Ether Carboxylate as a Mild Cleansing Agent

Five anionic surfactants widely used in commercial skin cleansers were studied: sodium polyoxyethylene lauryl ether carboxylate (EC), sodium polyoxyethylene alkyl ether sulfate (ES), sodium dodecyl sulfate, potassium laurate, and N-cocoyl-l-glutamic acid monosodium salt. The amount of surfactant from aqueous solution adsorbed into the stratum corneum (SC), the degree of SC swelling, the change of the secondary structure of SC proteins (denaturation). The surface tension of surfactant–zein mixed solutions, and the solubilization behavior of zein were measured. Results showed that EC had the lowest adsorption into SC, the lowest SC swelling, and lowest denaturation of SC proteins. Low interactions between surfactants and SC proteins were also observed for EC/ES mixture solutions as well as. Mixing EC with ES good foaming performance. The EC/ES mixture, at about 1:1 ratio, is an excellent surfactant system for skin cleanser applications having cleansing characteristics and mildness to the skin.     

Novel functional polymers: Poly(dimethylsiloxane)–polyamide multiblock copolymer. III. Synthesis and surface properties of disiloxane–aromatic polyamide multiblock copolymer

Disiloxane–aromatic polyamide(aramid) multiblock copolymers(2SiPASs) were synthesized using 1,3-bis(3-aminopropyl)-1,1,3,3-tetramethyldisiloxane(BATS) as an analog of aramidsilicone resin consisting of aromatic polyamide and poly(dimethylsiloxane) (PDMS). 2SiPASs afford a transparent and toughened plastic film. The surface properties of 2SiPAS were investigated by X-ray photoelectron spectroscopy (xps) and static contact angle measurement. The results of surface analysis suggested that BATS content of the 2SiPAS surface increased with increasing BATS content in bulk. The interaction between the platelets and the 2SiPAS surface was found to be very weak when the BATS content reached 26 wt % in bulk. © 1996 John Wiley & Sons, Inc.     

Wave venation in downward gas-liquid two-phase flow (part I,time-spatial behavior chart of interface and analysis of main wave-vein)

Time-series information on both the cross-sectional mean liquid holdup along a tube axis and the gas-liquid phase distribution along a tube diameter was obtained by means of supermultiple cross-sectional mean liquid holdup probes (S-CHOP) and semi-supermultiple point-electrode probes (SS-PEP) for vertical downward gas-liquid two-phase flow. Typical time-spatial behavior charts of interface and gas-liquid interfacial profiles are presented. Close inspection of these results reveals that a huge wave and a disturbance wave appear in downward two-phase flow as well as upward flow. It was clarified that the huge wave flow region covers a wide range of superficial gas velocities. Wave velocity, wave width and maximum liquid holdup of individual waves were examined by wave-vein analysis. Histograms of these flow parameters were also studied. It was found that there exist distinct differences in wave width between the huge wave and the disturbance wave. © 1997 Scripta Technica, Inc. Heat Trans Jpn Res, 25(8): 499–510, 1996     

Physicochemical properties of monosodium glutamate-compounded tapioca starch exceeds those of simple heat-moisture treated starch

Monosodium glutamate (GluNa)-compounded starch was prepared by heat-moisture treating a mixture of tapioca starch and GluNa. GluNa-compounded starch exhibited a higher gelatinization temperature and reduced swelling and solubility, essentially lower hardness of the granule center, and paste viscosity than those of the heat-moisture treated tapioca starch and the untreated starch. However, its appearance, unit chain length distribution, and α-amylase digestibility were similar to those of the heat-moisture treated tapioca. It is thus concluded that GluNa compounding is useful for providing a unique type of starch that possesses a less swollen and viscous texture than that produced with simple heat-moisture treatment.     

Purification and characterisation of antioxidative peptides from unfractionated rice bran protein hydrolysates

Crude rice bran protein (CRBP) was prepared by alkaline extraction and then treated with 0.6 m HCl to remove phytic acid. The phytate‐free rice bran protein (PFRBP) was hydrolysed with proteases M, N, S, P and pepsin under optimal conditions. Hydrolysates obtained from various hydrolysis periods were subjected to analysis for their degree of hydrolysis (DH) and functional properties. The hydrolysates were fractionated by reversed‐phase column chromatography on Kaseigel ODS resin (120–140 μm) using a stepwise gradient of aqueous ethanol, and their activities were measured. The 40% ethanol fraction of protease P 4 h‐hydrolysate was separated by successive reversed‐phase high‐performance liquid chromatography and the amino acid sequences of isolated antioxidative peptides were determined by a protein sequencer and matrix‐assisted laser desorption ionisation‐time of flight mass spectrometry. Crude rice bran protein had higher antioxidative activity than PFRBP, due to the presence of phytic acid. Phytate contents of rice bran, CRBP and PFRBP were 2.5%, 1.42% and 0%, respectively. The activity of PFRBP increased upon protease digestion. Protease M hydrolysates showed the highest DH, but the lowest antioxidative activity. Hydrolysates with DH below 10% had higher antioxidative activity than those above 20%. This result indicates that the antioxidative activity of the hydrolysates is inherent to their characteristics amino acid sequences of peptides depending on the protease specificities.     

Hypotensive effect of a sweetpotato protein digest in spontaneously hypertensive rats and purification of angiotensin I-converting enzyme inhibitory peptides

We have investigated angiotensin I-converting enzyme (ACE) inhibitory activity in an enzyme digest of sweetpotato protein, the antihypertensive effect of the digest in spontaneously hypertensive rats (SHR), and the identification of an ACE inhibitory peptide. Protein was prepared from squeezed juice of sweetpotato by isoelectric focusing precipitation. Three kinds of proteases were selected for effective protein digestion. The digest, sweetpotato peptide (SPP), exhibited strong ACE inhibitory activity (IC₅₀: 18.2 μg/ml). SPP was orally administered by gavage to SHR at a dose of 100 mg/kg or 500 mg/kg. The systolic blood pressure and the diastolic blood pressure were measured at 0 (before administration), 2, 4, 8, and 24 h after administration. A dose-dependent decrease in systolic blood pressure in SHR was observed after oral administration of SPP. Significant differences between SPP-administered rats and control rats were observed 4 and 8 h after administration in the 500 mg/kg-administered group and 8 h after administration in the 100 mg/kg-administered group. Diastolic blood pressure also decreased in the SPP-administered groups, although the difference between SPP-administered rats and control rats was not significant. These results suggest that SPP may be useful in the prevention or treatment of hypertension. Peptides with ACE inhibitory activity were purified from SPP by absorption chromatography and preparative HPLC using an ODS column. The amino acid sequences of isolated peptides were I-T-P, I-I-P, G-Q-Y and S-T-Y-Q-T; their ACE inhibitory activities (IC₅₀) were 9.5 μM, 80.8 μM, 52.3 μM and 300.4 μM, respectively. In conclusion, I-T-P is a novel, strong ACE inhibitory peptide.     

Studies on analysis of terpene resin in imported chewing gums

We have developed an analytical method for terpene resins in chewing gum. The fraction including terpene resins was prepared by means of hexane extraction and two silica gel column chromatography treatments (hexane and ethyl acetate) from chewing gum. The terpene resin fraction was analyzed with LC/MS and IR. The terpene resins are mixtures of polymeric pinene and/or limonene, which have a monomer molecular weight of 136. The MS spectrum of the terpene resin peak on the LC/MS total ion chromatogram showed protonated molecular ion (M + H)+ peaks at intervals of m/z 136, characteristic of a complex mixture of polyterpenes. IR spectroscopy is a suitable technique to identify the terpene resin type, ie., pinene or limonene. When the method was applied to imported chewing gum sold in Japan, terpene resins were clearly detected.     

Crack-Healing Behavior of Si3N4/SiC Ceramics under Cyclic Stress and Resultant Fatigue Strength at the Healing Temperature

Si₃N₄/SiC composite ceramics were sintered and subjected to three-point bending. A semi-elliptical surface crack of 100 μm surface length was made on each specimen. The crack-healing behavior under cyclic stress of 5 Hz, and resultant cyclic fatigue strengths at healing temperatures of 1100° and 1200°C, were systematically investigated. The main conclusions are as follows: (1) Si₃N₄/SiC composite ceramics have an excellent ability to heal a crack at 1100° and 1200°C. (2) This sample could heal a crack even under cyclic stress at a frequency of 5 Hz. (3) The crack-healed sample exhibited quite high cyclic fatigue strength at each crack-healing temperature, 1100° and 1200°C.