Toughening of Silicon Nitride Matrix Composites by the Addition of Both Silicon Carbide Whiskers and Silicon Carbide Particles

Si₃N₄ matrix composites reinforced by SiC whiskers, SiC particles, or both were fabricated using the hot-pressing technique. The mechanical properties of the composites containing various amounts of these SiC reinforcing materials and different sizes of SiC particles were investigated. Fracture toughness of the composites was significantly improved by introducing SiC whiskers and particles together, compared with that obtained by adding SiC whiskers or SiC particles alone. On increasing the size of the added SiC particles, the fracture toughness of the composites reinforced by both whiskers and particles was increased. Their fracture toughness also showed a strong dependence on the amount of SiC particles (average size 40 μm) and was a maximum at the particle content of 10 vol%. The maximum fracture toughness of these composites was 10.5 MPa·m^1/2 and the flexural strength was 550 MPa after addition of 20 vol% of SiC whiskers and 10 vol% of SiC particles having an average particle size of 40 μm. These mechanical properties were almost constant from room temperature to temperatures around 1000°C. Fracture surface observations revealed that the reinforcing mechanisms acting in these composites were crack deflection and crack branching by SiC particles and pullout of SiC whiskers.     

Reaction products of α-tocopherol with methyl linoleate-peroxyl radicals

α-Tocopherol was reacted with methyl linoleateperoxyl radicals at 37°C. The peroxyl radicals were generated by the reaction of methyl linoleate with a free radical initiator, 2,2′-azobis(2,4-dimethylvaleronitrile). The primary products of α-tocopherol with methyl linoleate-peroxyl radicals were isolated by reversephase and normal-phase high performance liquid chromatography (HPLC), and their structures were characterized by ultraviolet (UV), infrared (IR),¹H and¹³C nuclear magnetic resonance (NMR) and mass spectrometry (MS). There were four stereoisomers of methyl 13-(8a-peroxy-α-tocopherone)-9(Z),11(E)-octadecadienoate and four stereoisomers of methyl9-(8a-peroxy-α-tocopherone)-10(E),12(Z)-octadecadienoate.     

Modeling of Nonlinear Magnetizing Characteristics of Pole Transformer for Analyzing Islanding Prevention of Photovoltaic System

With increasing penetration of distributed generators such as photovoltaic (PV) systems in distribution systems, it is very important to quickly detect islanding caused by power system faults in order to assure electrical safety. We have developed a nonlinear magnetizing characteristics model of pole transformers for use in analyzing islanding prevention in PV systems. Basic experiments on the islanding detection were performed for verification of the proposed model. Analytical results obtained by the proposed model agreed well with experimental results.     

Novel functional polymers: Poly(dimethylsiloxane)–polyamide multiblock copolymer. III. Synthesis and surface properties of disiloxane–aromatic polyamide multiblock copolymer

Disiloxane–aromatic polyamide(aramid) multiblock copolymers(2SiPASs) were synthesized using 1,3-bis(3-aminopropyl)-1,1,3,3-tetramethyldisiloxane(BATS) as an analog of aramidsilicone resin consisting of aromatic polyamide and poly(dimethylsiloxane) (PDMS). 2SiPASs afford a transparent and toughened plastic film. The surface properties of 2SiPAS were investigated by X-ray photoelectron spectroscopy (xps) and static contact angle measurement. The results of surface analysis suggested that BATS content of the 2SiPAS surface increased with increasing BATS content in bulk. The interaction between the platelets and the 2SiPAS surface was found to be very weak when the BATS content reached 26 wt % in bulk. © 1996 John Wiley & Sons, Inc.     

Wave venation in downward gas-liquid two-phase flow (part I,time-spatial behavior chart of interface and analysis of main wave-vein)

Time-series information on both the cross-sectional mean liquid holdup along a tube axis and the gas-liquid phase distribution along a tube diameter was obtained by means of supermultiple cross-sectional mean liquid holdup probes (S-CHOP) and semi-supermultiple point-electrode probes (SS-PEP) for vertical downward gas-liquid two-phase flow. Typical time-spatial behavior charts of interface and gas-liquid interfacial profiles are presented. Close inspection of these results reveals that a huge wave and a disturbance wave appear in downward two-phase flow as well as upward flow. It was clarified that the huge wave flow region covers a wide range of superficial gas velocities. Wave velocity, wave width and maximum liquid holdup of individual waves were examined by wave-vein analysis. Histograms of these flow parameters were also studied. It was found that there exist distinct differences in wave width between the huge wave and the disturbance wave. © 1997 Scripta Technica, Inc. Heat Trans Jpn Res, 25(8): 499–510, 1996     

Crack-Healing Behavior of Si3N4/SiC Ceramics under Cyclic Stress and Resultant Fatigue Strength at the Healing Temperature

Si₃N₄/SiC composite ceramics were sintered and subjected to three-point bending. A semi-elliptical surface crack of 100 μm surface length was made on each specimen. The crack-healing behavior under cyclic stress of 5 Hz, and resultant cyclic fatigue strengths at healing temperatures of 1100° and 1200°C, were systematically investigated. The main conclusions are as follows: (1) Si₃N₄/SiC composite ceramics have an excellent ability to heal a crack at 1100° and 1200°C. (2) This sample could heal a crack even under cyclic stress at a frequency of 5 Hz. (3) The crack-healed sample exhibited quite high cyclic fatigue strength at each crack-healing temperature, 1100° and 1200°C.     

Effect of blending on liquefaction of coals

After solvent extraction of Taiheiyo, Miike and Balmer coals using wash oil under nitrogen atmosphere at 370 °C for 30 min, the extraction yield is always within the additivity law. Further studies used Yallourn, Soyakoishi, Taiheiyo, Horonai, Miike, Shin Yubari, Balmer coals and their blends which were hydrogenated in tetralin, wash oil or creosote oil, with or without catalyst, at 400–450 °C under 10 or 3 MPa of initial hydrogen pressure. When hydrogen is available, the additivity law exists for blended coals, but when the hydrogen supply is deficient, the experimental conversion of blended coals is always lower than calculated conversions. This may be due to the faster consumption of the hydrogen by more reactive coals and thus the less reactive coals were unable to react with hydrogen.     

Correlation of reactivity to hydrogenation and chemical structure of lignites

Three North Dakota lignites with almost the same percentage carbon have been used to determine the relation between chemical structure and reactivity to hydrogenation. Average structural indices of the lignites were estimated using the pyridine-soluble products after alcohol-alkali treatment, the structural indices obtained at various reaction times being extrapolated to zero reaction time. Hydrogenation was influenced by the average structure, with the lignite having higher aromaticity, higher molecular weight of the pyridine extract from the alcohol-alkali reaction product, larger aromatic ring size and lower content of aliphatic structure, showing a smaller degree of conversion.     

Mechano-electrochemistry of a passive surface using an in situ micro-indentation test

Depassivation–repassivation of iron surfaces in boric–borate solutions were investigated by using the micro-indentation test. A pair of current peaks due to repair of the passive film following rupture of the film were observed during a series of indenter drives, i.e., loading and unloading of the indenter. The shape of the current peak depended on environmental conditions (conductivity and pH of the solution) and substrate conditions (mechanical processing history, alloyed element) as well as indentation conditions (repetition, maximum depth, and maximum load). Plastic deformation of the surface was accompanied by surface depassivation, while no depassivation occurred during the elastic deformation, indicating that the passive film on iron has a ductile property. The solution conditions did not affect the scale of depassivation but affected the rate of repassivation. Dislocations in the substrate made surface depassivation difficult but enhanced reactivity during the repassivation. The test also revealed that type-312L stainless steel has high corrosion resistance in a concentrated NaCl solution.     

Leak detection in pipe using transient flow and genetic algorithm

An inverse transient method with genetic algorithm (GA) was applied to leak detection in pipeline. Transient flow caused by valve operation was calculated using the characteristics method. The location and discharge of leak were determined so that the difference of the calculated pressure may be minimized from the reference pressure calculated under a given leak condition. Calculations were done for the leak at one and two locations in pipeline. Furthermore, the effect of noise in pressure data was discussed, and the leak locations and leak discharges can be predicted precisely even in the case of noisy data. This paper was presented at the 9^th Asian International Conference on Fluid Machinery (AICFM9), Jeju Korea, October 16–19, 2007.