Boson peak and structural heterogeneity in ternary SiO2-Al2O3-B2O3 glasses

We use low-temperature heat capacity, low-frequency Raman scattering, and THz time domain spectroscopy in order to scale the vibrational density of states and the Boson peak in SiO₂-Al₂O₃-B₂O₃ Yb-laser host glasses. When substituting B₂O₃ for SiO₂ at constant Al₂O₃ dopant level, we find an optimal value for the ratio of B/Al in terms of mixture stability, at which the excess in the electron donor capability of Al₂O₃ (relative to the SiO₂ backbone) is compensated by the more acidic B₂O₃. At this composition, Al₂O₃ plays a mediating role in the structure of aluminoborosilicate glasses, facilitating dissolution of Yb₂O₃ and admixture of B₂O₃ into the SiO₂ network.     

Preparation of Carbon-Doped TiO2 Nanopowder Synthesized by Droplet Injection of Solution Precursor in a DC-RF Hybrid Plasma Flow System

Carbon-doped titanium dioxide nanopowder has received much attention because of its higher photocatalytic performance, which is practically activated not only by UV, but also by visible light irradiation. In the present study, C-TiO₂ nanopowder was synthesized by droplet injection of solution precursor in a DC-RF hybrid plasma flow system, resulting in higher photocatalytic performance even under visible light irradiation. In-flight C-TiO₂ nanoparticles reacted with the high concentration of carbon in plasma flow and were then deposited on the surfaces of two quartz tubes in the upstream and downstream regions of this system. The collected C-TiO₂ nanopowder contained anatase-rutile mixed-phase TiO₂ and TiC, the contents of which depended on the location of the powder collection, the temperature, and the duration of plasma treatment. Highly functional C-TiO₂ nanopowder collected in the downstream region exhibited a higher degradation rate of methylene blue than that of single-phase anatase TiO₂, even under visible light irradiation, in spite of being TiC.     

Fabrication of high‐strength steel fibre reinforced metal matrix composites by explosive bonding and their tensile properties

Summary

Steel fibre reinforced metal matrix composites (FRM) consisting of high‐strength ductile steel wire and aluminium or titanium foil were fabricated by explosive bonding. The strength properties were evaluated by tensile tests. The optimum explosive loading (explosive mass/driver plate mass) increases with the volume fraction of fibre. For the aluminium matrix composites, the micrographs obtained show sound bonding between the adjoining foils and non‐bonding between the foil and steel wire. The tensile strength of the aluminium matrix composites is 80% of the value predicted by the rule of mixtures. For the titanium matrix composites, the micrographs obtained show both bonded and unbonded regions between the adjoining foils or between the foil and steel wire. The tensile strength of the titanium matrix composites agrees with the value predicted by the rule of mixtures.     

Resolution of Epoxydienes by Reversed-Phase Chiral HPLC and its Application to Stereochemistry Assignment of Mulberry Looper Sex Pheromone

Resolution of insect pheromonal cis-epoxydiene racemates derived from (Z,Z,Z)-3,6,9-trienes was examined with a reversed-phase chiral HPLC column. The results showed that a Chiralcel OJ-R column was suitable for separating the enantiomers having a C₁₇–C₂₃ unsaturated straight chain except for 9,10-epoxydienes with a C₂₁–C₂₃ chain. To determine the absolute configuration of the separated enantiomers, each of the optically active epoxydienes was hydrogenated over Pd-BaSO₄ and its behavior was examined on this chiral column by cochromatography with the corresponding chiral epoxy compound having a saturated chain, which was prepared via a Sharpless epoxidation reaction. This analysis showed that the dextrorotatory C₁₇–C₂₃ 3,4- and 6,7-epoxydienes and C₁₇–C₂₀ 9,10-epoxydienes with shorter R _ts possess (3S,4R)-, (6S,7R)-, and (9R,10S) configurations, respectively, and the levorotatory enantiomers with longer R _ts possess the opposite configuration. An abdominal tip extract of the mulberry looper, Hemerophila artilineata Butler (Lepidoptera: Geometridae: Ennominae), included (9S,10R)-(Z,Z)-cis-9,10-epoxy-3,6-octadecadiene as a main sex pheromone component. The synthetic (9S,10R)-9,10-epoxydiene, rather than its antipode, elicited strong antennal and behavioral responses from the male moths in electrophysiological and field tests.     

A new direction or class assistance during laboratory sessions

Experimental training for undergraduate students in electric and electronic engineering courses must take advantage of emerging technologies. PC-based measurement systems, as well as, virtual instruments are very useful for beginners, which help test theoretical knowledge, carry out useful self-training, and acquire basic hands-on experience with problems arising in real-world experimental trials. Still, training with real instruments in a laboratory can provide students the necessary experience in measurement procedures and basic expertise in the design of measurement systems. Great efforts must be made in the development of new methodologies and tools able to fit the requirements of classes involved in experimental sessions. Advanced technologies can support the development of highly featured and capable laboratory sessions. As an example, the client-server tool presented in this article represents a partial result of a step-by-step ongoing work, which includes a suitable software interface and circuits that will be used to carry out classical experiments. The system has proved to be very useful for the experimental training of undergraduates and they can use it by themselves through a user-friendly interface. Moreover, the laboratory is available for greater lengths of time and can solve the problem of the lack of an adequate number of tutors.     

A novel spherical carbon

We developed a novel spherical carbon material. The spherical carbon is composed of a high density of carbon nanotubes or nanofilaments, and includes an oxidized diamond particle as a core. Syntheses of this carbon in high volume with high selectivity may be possible. It is expected that this carbon will be useful as a catalyst material for fuel cells, electric double-layer capacitors, etc.     

Fundamental Behavior of Direct-Coupled Submicrosecond Pulse Energization in Electrostatic Precipitators

The fundamental characteristics of the direct-coupled pulse energization in electrostatic precipitators (EP's) are investigated in a test rig comprised of a coal pulverizing facility, a furnace, a gas cooling system, and an EP. The EP consisted of a corona electrode with barbed wires and a collection electrode with 300-mm duct spacing. This simulates the type of EP normally used in a coal-fired power station. The pulse-energized collection field shows a very high collection performance of more than 99 percent collection efficiency and the performance enhancement compared to the conventional dc energization, causing very severe back corona, becomes as large as H = 2.50.H is the enhancement factor in terms of the Deutsch migration velocity in the case of the very high resistivity dust of rd = 2 x 1013 ?cm at the gas temperature of Tg = 150°C. Even at the lower level of the dust resistivity at Tg = 110°C, where no back corona occurs in the dc-energized collection field, the performance enhancement is as large as H = 1.21. The mechanism of such great performance enhancement is likely to be the result of the very uniform and very intense formation of corona plasmas on the wires as a result of the very fast rise in the pulse voltage applied and a special sawtooth waveform of the operating voltage between the corona and collection electrodes.     

Chiral separation of amines by high-performance liquid chromatography after tagging with 4-(N,N-dimethylaminosulphonyl)-7-(2-chloroformylpyrrolidin-1-yl)- 2,1,3-benzoxadiazole

Chiral tagging reagents, 4-(N,N-dimethylaminosulphonyl)-7-(2-chloroformylpyrrolidin-1 -yl)-2,1,3- benzoxadiazole (R(+)-DBD-Pro-COCl and S(-)-DBD-Pro-COCl), react with mirror image enantiomers of amines to produce corresponding diastereomers in the presence of pyridine as a catalyst. The maximal excitation and emission wavelengths of the resulting diastereomers were ca. 450 nm and 560 nm, respectively. The diastereomers derived from some aliphatic amines were resolved by a reversed-phase chromatography with water-acetonitrile or normal-phase chromatography with n-hexane-ethyl acetate as the eluent. The reactivities of both enantiomers of DBD-Pro-COCl to chiral amines were almost comparable, whereas a slight difference of fluorescence intensity was observed with S(-)-DBD-Pro-COCl. When (S-)-DBD-Pro-COCl was used as the derivatization reagent, amines corresponding to S-configuration were eluted faster than R-configuration. The opposite elution order was obtained with the use of R(+)-DBD-Pro-COCl, instead of S(-)-DBD-Pro-COCl. The Rs values obtained from 1-cyclohexylethylamine (CEA) having aliphatic ring structure was larger than those of amines (1-(1-naphthyl)ethylamine (NEA) and 1-phenylethylamine (PEA)) having aromatic ring structures.     

Performance of a-WO3/LiClO4-PC electrochromic displays

This paper deals with the improvements in response time and reliability of the aWO₃/LiClO₄-PC (propylene carbonate) electrochromic display. Response time was improved by adopting the highly porous a-WO₃ film, the porous reflector and the high surface area non-polarizable counter-electrode. Results from the reliability tests indicated that the ECD had a sufficient lifetime for practical applications such as in watches, clocks and calculators. The mechanism of performance drift upon cycling the display is investigated using ESCA, AES and atomic absorption methods.     

Reliability of AllnAs/lnGaAs/lnP HEMT with WSi ohmic contacts

We have investigated the degradation mechanism of Al_0.48In_0.52As/In_0.53Ga_0.47As/ InP high electron mobility transistors (HEMTs) using WSi ohmic electrodes. Cross-sectional transmission electron microscopy (TEM) observation and en-ergy dispersive x-ray (EDX) analysis reveal impurities diffusion of gate electrode (titanium: Ti) and fluorine (F) in the AlInAs layer after a high temperature (T_a = 170°C operating life test for 500 h. The decrease of drain current (I_ds) during life test shows linear dependence on square root of aging time. It suggests that the degradation is controlled by a diffusion mechanism. Hence, the estimated degradation mechanism of this device is related with decrease of carrier concentration in the epitaxial layer by these diffused impurities. On the other hand, TEM and EDX show no degradation of WSi/InGaAs interface after aging. Therefore, the WSi electrode for this type of HEMT demonstrates excellent high stability under the accelerated operating life test.