Distributed architecture for energy management D-structure

Electric power systems are expanding in size and complexity, and the requirement for the energy management system (EMS) is becoming more important. In this computer control system, a single control computer is used mainly as the primary computer and its software is very complicated because of its hugh number of small, quick tasks to obtain high response speed. Therefore, much effort is needed to develop and modify the programs, and the responsiveness of this centralized architecture varies greatly when many faults occur in the power system. This paper describes a new distributed architecture for the EMS. Distributed processors execute the functions cooperatively with periodic access to the common bulletin board database in which information about the power system exist. This architecture facilitates the software development and maintenance, and it also enhances the performance by the parallel processing of the distributed functions.     

A far-infrared spectroscopic study of low temperature soft phonon mode in Tris-Sarcosine Calcium Chloride(TSCC)

Temperature dependences of the soft phonon frequency and the damping constant in Tris-Sarcosine Calcium Chloride (TSCC) single crystal have been investigated between 5K and 100K by using a Fourier-transform far-infrared spectrometer. It has been observed that the soft phonon frequency decreases gradually and the damping constant increases as the transition temperature is approached from below The damping constant varies from 7cm^-1 a 90K to less than 0.5cm^-1 at 5K. It has been found that the damping constant is approximately proportional to temperature below about 60K.     

The elimination of hepatitis B virus infection: changing seroepidemiology of hepatitis A and B virus infection in Okinawa, Japan over a 26-year period

Serial changes in hepatitis A virus (HAV) and B virus (HBV) markers were determined from 1970 to 1996 in healthy Japanese residents of a rural area of Okinawa, Japan. All 190 serum samples taken in 1970, 791 in 1980, 708 in 1988, and 523 in 1996 from residents 0 to more than 60 years of age were tested for antibody to HAV (anti-HAV), antibody to hepatitis B core antigen (anti-HBc), and hepatitis B surface antigen (HBsAg). The age-adjusted prevalences of anti-HAV and anti-HBc decreased significantly from 83.9% and 74.9%, respectively, in 1970 to 39.7% and 36.6%, respectively, in 1996. In residents < or = 29 years of age, the prevalences of anti-HAV and anti-HBc decreased significantly from 65.3% and 83.8%, respectively, in 1970 to 0.7% and 8.2%, respectively, in 1996. The age-adjusted HBsAg prevalence decreased significantly from 8.2% in 1980 to 4.1% in 1988. These results indicate that exposure to HAV and HBV infections among Okinawa residents less than 29 years of age is decreasing, probably because of improvements in socioeconomic conditions since 1970. Infection with HBV may be eliminated there in the near future.     

Restriction fragment length polymorphism of genes of the alpha 2(XI) collagen, bone morphogenetic protein-2, alkaline phosphatase, and tumor necrosis factor-alpha among patients with ossification of posterior longitudinal ligament and controls from the Japanese population

STUDY DESIGN: The present study analyzed the restriction fragment length polymorphism patterns of alpha 2(XI) collagen, bone morphogenetic protein-2, alkaline phosphatase, and tumor necrosis factor-alpha genes in patients with ossification of the posterior longitudinal ligament. This study investigates the genetic polymorphism of bone-induced factors in patients with ossification of the posterior longitudinal ligament and compares it with healthy control subjects. OBJECTIVES: To clarify the genetic markers linked to ossification of the posterior longitudinal ligament. SUMMARY OF BACKGROUND DATA: Ossification of the posterior longitudinal ligament is a genetic disease associated with abnormal calcium metabolism involving the posterior longitudinal ligament. Previous genetic studies have not identified the pathologic mechanism of ossification of the posterior longitudinal ligament. Histopathologic studies of ossification of the posterior longitudinal ligament and the animal model, the spinal hyperostotic mouse, have revealed an increase in Type XI collagen and bone morphogenetic protein-2 expression. METHODS: Eighteen Japanese patients with ossification of the posterior longitudinal ligament and 51 healthy, unrelated control subjects were investigated for the restriction fragment length polymorphism patterns of COL11A2, bone morphogenetic protein-2, alkaline phosphatase, and tumor necrosis factor-alpha, genes with various restriction endonucleases. RESULTS: The gene frequencies of COL11A2 obtained with BamHl (10.0 kb fragment) and HindIII (19.0 kb fragment) observed in patients with ossification of the posterior longitudinal ligament were higher compared with control subjects (0.43 and 0.14, respectively). These differences were statistically significant (BamHl P = 0.018; Hindlll P = 0.046). Two new restriction fragment length polymorphism patterns were detected of the bone morphogenetic protein-2 gene with Mspl and Taql and one already known restriction fragment length polymorphism pattern of the tumor necrosis factor-alpha gene with Ncol. However, they were not significantly different from the control subjects. CONCLUSIONS: Seven restriction fragment length polymorphisms of COL11A2 gene were identified. Two of them (BamHl, 10.0/10.0 kb genotype; HindIII, 19.0/19.0 kb genotype) were significantly different in patients with ossification of the posterior longitudinal ligament.     

A calibration method for the energy-integrating function in photovoltaic system monitoring

Solar radiation has an irregularly varying factor due to a basic day and night cycle and climatic conditions. For such conditions a data sampling interval is important to ensure the accuracy of energy monitoring in a photovoltaic system. While treating a system monitoring equipment as a black box. the author has developed the method of calibrating an energy-integrating function. At first for various input waveforms, the relationship between sampling intervals and quasi-integration outputs have been examined by trapezoidal rule. In the numerical simulation the phases of the sampling clock also are considered Then it is concluded that a sampling interval can be inspected through outside observation only by using a rectangular single pulse. By applying the pulse to the energy-integrating process, two kinds of integrated outputs can be obtained for different sampling phases. The calculated difference between both outputs can uniquely give the sampling interval being inspected. Conditions to ensure measuring accuracy are discussed and the validity of this method has been demonstrated experimentally. Practical calibrating procedures also are proposed for the integrating function of PV system monitoring.     

Preparation of rod-shaped BaTiO3 powder

Rod-shaped BaTiO₃ powder particles have been prepared from rod-shaped TiO₂ ·nH₂O and BaCO₃ in molten chloride. The morphology of BaTiO₃ particles was studied referring to the effects of the chemical species of the starting titanium compound, amount of chloride, particle size of the titanium compound and reaction conditions, and the preparation condition of rod-shaped BaTiO₃ has been determined: i.e., large TiO₂ ·nH₂O particles were heated at 700°C in molten salt with an equal amount of BaTiO₃. This condition was effective in suppressing the formation of BaTiO₃ by a solution-precipitation process as well as the deformation of either TiO₂ ·nH₂O or BaTiO₃, which are responsible for the formation of equiaxed BaTiO₃ particles. The obtained rod-shaped BaTiO₃ particles had a cubic symmetry. Electron diffraction analysis showed that the following topotactic relation is retained; 0 1 0_{potassium tetratitanate} 0 1 0_{hydrated titania} 1 0 0_anatase 1 0 0_{barium titanate}     

Growth of Al2O3 whiskers by vapour-phase reactions

Needle-like or wool-like Al₂O₃ whiskers can be grown on a substrate by the hydrolysis of aluminium fluoride vapour. Effects of the growth conditions on the morphology of the crystals and growth processes of the whisker were investigated, and the optimum growth condition of whiskers was examined. Adequate vapour pressure conditions of the reactant gases for the growth of the wool-like whisker were found to be . Aluminium oxyfluoride was assumed to be the most probable intermediate species for the growth of Al₂O₃ whiskers. A variety of crystal morphologies are also shown and described with respect to the experimental conditions.     

Gas chromatographic separation of wax esters based on the degree of unsaturation

The wax esters of sperm whale head oil have been characterized by gas-liquid chromatography on an APOLAR 10C column according to their carbon number and number of double bonds. The novel technique permits the direct quantitative analysis of saturated and unsaturated wax esters.     

Shape memorizing properties of a hydrogel of poly(vinyl alcohol)

Hydrogel prepared by repetitive freezing and thawing of poly(vinyl alcohol) aqueous solution was chemically crosslinked with glutaraldehyde. The chemically crosslinked hydrogel hardly changed its physical appearance, and showed good elasticity and strength as original gel. However, after treating in boiling water, it swelled a little, depending on the condition of the chemical treatment. The melted gel thus obtained showed shape memorizing property, that is, it could firmly hold nearly 200% of strain, keeping its original high elasticity. The strain could be released very quickly (< 1 s) in boiling water, and the gel was suggested to be applied to a new type of gel actuator. X-ray diffraction study revealed that the melted gel does not necessarily reform the physical crosslinks in exactly the same manner as the original gel in the process of shape restoring, but the distribution of the physical crosslinks can be restored as they were. It was suggested that the chemical crosslinks which remember the distribution of the physical crosslinks plays a critical roll in the shape restoring process.