The Japanese experiences with national PV system programmes

The paper summarises Japanese activities concerning photovoltaic systems including those for residential use, which is one of the major targets for a domestic alternative energy supply. Fiscal year 1999 marked the 25th anniversary of the Sunshine Project that was initiated in July 1974. The Sunshine Project was subsequently reorganised into the New Sunshine Program to include renewable energy, energy conservation and environmental technology. The major target of the Photovoltaic Technology Development Project in the Programme, from an early stage of R&D, has been focused on utility-connected, residential applications mounted on roofs. Recently, it can be considered that technologies for the target have been fundamentally established and a series of new activities have been introduced to promote the commercialisation and diffusion of PV systems. To review those activities, several condensed tables are presented, i.e., R&D history of residential applications, recent trends in regulation and code improvements, and new institutional activities to disseminate PV systems. The authors also present performance results collected from a large number of PV systems by using a very effective evaluation method called the ‘SV method’. The paper finishes by introducing a good example of simple system monitoring with good verification that can establish a knowledge circle from a variety of PV fields, including to factories, engineers, owners and investors, and it seems to be quite cost-effective.     

A Monolayer MoS2 FET with an EOT of 1.1 nm Achieved by the Direct Formation of a High-κ Er2O3 Insulator Through Thermal Evaporation

Achieving the direct growth of an ultrathin gate insulator with high uniformity and high quality on monolayer transition metal dichalcogenides (TMDCs) remains a challenge due to the chemically inert surface of TMDCs. Although the main solution for this challenge is utilizing buffer layers before oxide is deposited on the atomic layer, this method drastically degrades the total capacitance of the gate stack. In this work, we constructed a novel direct high-κ Er₂O₃ deposition system based on thermal evaporation in a differential-pressure-type chamber. A uniform Er₂O₃ layer with an equivalent oxide thickness of 1.1 nm was achieved as the gate insulator for top-gated MoS₂ field-effect transistors (FETs). The top gate Er₂O₃ insulator without the buffer layer on MoS₂ exhibited a high dielectric constant that reached 18.0, which is comparable to that of bulk Er₂O₃ and is the highest among thin insulators (< 10 nm) on TMDCs to date. Furthermore, the Er₂O₃/MoS₂ interface (D_it ≈ 6 × 10¹¹ cm⁻² eV⁻¹) is confirmed to be clean and is comparable with that of the h-BN/MoS₂ heterostructure. These results prove that high-quality dielectric properties with retained interface quality can be achieved by this novel deposition technique, facilitating the future development of 2D electronics.     

Adaptive Liquid Interfacially Assembled Protein Nanosheets for Guiding Mesenchymal Stem Cell Fate

There is a growing interest in the development of dynamic adaptive biomaterials for regulation of cellular functions. However, existing materials are limited to two-state switching of the presentation and removal of cell-adhesive bioactive motifs that cannot emulate the native extracellular matrix (ECM) in vivo with continuously adjustable characteristics. Here, tunable adaptive materials composed of a protein monolayer assembled at a liquid–liquid interface are demonstrated, which adapt dynamically to cell traction forces. An ultrastructure transition from protein monolayer to hierarchical fiber occurs through interfacial jamming. Elongated fibronectin fibers promote formation of elongated focal adhesion structures, increase focal adhesion kinase activation, and enhance neuronal differentiation of stem cells. Cell traction force results in spatial rearrangement of ECM proteins, which feeds back to alter stem cell fate. The reported biomimetic adaptive liquid interface enables dynamic control of stem cell behavior and has potential translational applications.     

Difference in the outdoor performance of bulk and thin-film silicon-based photovoltaic modules

Differences in the outdoor performances of bulk (multi- and single-crystalline Si) and thin-film (amorphous Si(a-Si), a-Si/micro-crystalline Si and a-Si/a-SiGe/a-SiGe) photovoltaic (PV) modules are analyzed. The influence of module temperature and solar spectrum distribution on the PV output is clarified. The PV outputs almost only depend on module temperature in bulk-type Si PV modules while that depend both module temperature and spectrum distribution in thin-film ones. Also, the PV outputs of the bulk-type Si PV modules at most frequent condition at outdoor are lower than that at the standard test condition; in contrast, it was the other way round for thin-film ones.     

Radiographic analysis of hallux valgus in women on weightbearing and nonweightbearing

To investigate changes in the radiographic appearance during weightbearing in hallux valgus and to examine the importance of a weightbearing view, a comparative study was performed of accurate dorsoplantar radiographs of 108 symptomatic hallux valgus feet in 73 female patients and 100 normal feet in 69 females, which were taken weightbearing and nonweightbearing. The hallux valgus angle in the hallux valgus group increased on weightbearing, whereas that in the normal group decreased. The intermetatarsal angle between the first and second metatarsals increased on weightbearing in both groups. The degree of the changes of the angles was closely related with the degree of the hallux valgus deformity. The intermetatarsal angle between the fourth and fifth metatarsals decreased on weightbearing in the both groups. A weightbearing view is necessary to evaluate the structural configuration of hallux valgus, because muscle imbalance around the first metatarsophalangeal joint in hallux valgus causes an increase of a hallux valgus angle on weightbearing.     

Development of an MRI-compatible needle insertion manipulator for stereotactic neurosurgery

At the University of California, San Francisco, 17 patients who met the following criteria-hepatic tumor unresectable because of location or inadequate liver reserve, no metastases, HBsAg negative, no tumor larger than 5 cm in diameter, and no more than three tumors--were enrolled prospectively in a protocol employing preoperative chemoembolization to assess whether orthotopic liver transplantation (OLT) could cure a majority of highly selected patients with hepatocellular carcinoma (HCC). Thirteen patients had biopsy-proven HCC, 2 had the fibrolamellar variant, and 2 had radiological findings of HCC but no biopsy confirmation. Fourteen had underlying liver disease. All arteriographically apparent lesions were chemoembolized using a mixture including Gelfoam powder, doxorubicin, mitomycin-c, and cisplatin. Eight patients with poor hepatic reserve were chemoembolized when a donor organ became available, whereas 9 patients were chemoembolized and then placed on the waiting list. The only complication of chemoembolization was a gangrenous gallbladder in 1 patient. Thirteen patients underwent liver transplantation (2 patients without prior histological confirmation of carcinoma had no identifiable tumor at OLT); 3 patients developed metastases between the time of enrollment and donor organ availability and subsequently died; and 1 patient underwent a trisegmentectomy. Ten of the 11 patients with biopsy-proven HCC who underwent transplantation remain free of recurrent cancer at a median of 40 months; 1 patient died at 6 months of lymphoproliferative disease with no cancer found at autopsy. Although the role of chemoembolization is uncertain, these data show that the majority of carefully selected patients with HCC may achieve long-term survival with OLT.     

Highly Stretchable,Global, and Distributed Local Strain Sensing Line Using GaInSn Electrodes for Wearable Electronics

For identifying human or finger movement, it is necessary to sense subtle movements at multiple points, including the local strain and global deformation simultaneously; however, this has not yet been realized. Therefore, a highly stretchable, global, and distributed local strain sensing electrode made of GaInSn and polydimethylsiloxane is developed for wearable devices. To investigate the electrical properties of multiple sections of the GaInSn electrode when stretching, tensile, cyclic, and three‐point‐bending tests are performed. The results demonstrate that the electrode can withstand a strain up to 50% and has little hysteresis without any delay. Moreover, the distributed local strain and global strain can be simultaneously measured using just a single electrode line. Finally, a prototype of a data glove as an application of the strain sensing line is manufactured, and it is demonstrated that the folding state of fingers could be identified. The proposed technology may allow the creation of a lightweight master hand manipulator or 3D data entry device.     

Effect of impurity on dissolution behavior of simulated molybdenum cermet fuels

The effects of impurity Zr on dissolution behavior into nitric acid of sintered Mo pellets were investigated using simulated fuels to accumulate basic data and knowledge concerning the matrix of Mo-cermet fuels. Mo pellets containing 1– 10 mol% Zr were prepared by conventional powder metallurgical route. After characterization tests using optical microscopy (OM), X-ray diffraction and secondary electron microscopy-energy dispersive X-ray spectrometry (EDX), the sintered pellets were subjected to dissolution tests by nitric acid. The apparent dissolution rate of Mo pellets containing impurity Zr was found to be followed by the first-order chemical reaction form, which is generally known as a simple chemical reaction. The rate of dissolution of sintered Mo-cermet fuels by nitric acid was found to decrease with the increase of the amount of impurity Zr.     

Manipulation of small particles utilizing electrostatic force

We developed electrostatic system for manipulating small particles with diameters in the range of several micrometers to 100 μm. The electrostatic manipulation probe consists of a monopole pin electrode. When voltage is applied to the electrode, a dielectrophoresis force generated in the nonuniform electrostatic field is applied to the particle near the tip of the electrode. The particle is captured with the application of voltage, and then it is released from the probe by applying a high voltage of the opposite polarity. It is possible to manipulate not only insulative but also weakly conductive particles. A three-dimensional field calculation and a measurement of the adhesion force were conducted to evaluate the force balance for the capture and release of a particle. On the basis of these investigations, we demonstrated the manipulation of actual lunar dust returned by the Apollo 11 lunar surface mission.     

Chemical bath deposition for the fabrication of antireflective coating of spherical silicon solar cells

A CdS film as an antireflective (AR) coating has been successfully deposited on spherical silicon solar cells by chemical bath deposition, which is a novel deposition method of AR coatings for spherical silicon solar cells. The CBD method is a growth method in an aqueous solution and enables film formation for electronic devices with arbitrary shapes. The solar cell performance of the cell with the CdS film showed a 16% increase in short circuit current compared to that without an ARC. The result confirms that the CBD method is useful for the ARC fabrication of spherical silicon solar cells.