Selected equipment,materials, and process interactions in a surface-imaging process

The advantages of surface-imaging photoresist processes have been well documented; it has shown to have greater resolution, wider focus budget, and less sensitivity to topography and reflections from the substrate. The DESIRE process (Diffusion Enhanced Silylated Resist) is a good example of a surface-imaging process. In previous papers we have described the characterization of this process in a lab environment, discussed some of the issues involved in the implementation of this process in a manufacturing environment, and more recently presented results from its implementation in a dynamic random memory, DRAM, manufacturing environment. A large of knowledge must be acquired and disseminated in the process of implementing a new technology in a manufacturing environment. This is particularly true in the semiconductor industry because of the large and complex interactions that exist between the process and the electronic characteristics of the devices. Even within the same process, complex interactions between the different steps can take place. Such is the case with the DESIRE process. Over the past few years a great deal of “know-how” has been acquired in the course of implementing this technology in a DRAM wafer fab of Texas Instruments in Dallas, Tex. We present here two selected cases where such complex interactions have been investigated: (1) radiation damage that might take place during the dry-development step of this process, and (2) the effect of the equipment and material on the electrical discharge, or arcing, during dry-development.     

Modeling of phase change material peak load shifting

This paper addresses potential peak air conditioning load shifting strategies using encapsulated phase change materials. The materials being considered here are designed to be installed within the ceiling or wall insulation to assist in delaying the peak air conditioning demand times until later in the evening. To assist in understanding the behavior of this material, an idealized model has been developed which uses the one-dimensional diffusion equation driven by time varying temperature functions imposed at the boundaries. In developing the model, the phase change temperature is a critical parameter, as is the latent heat of melting. These variables are treated parametrically. Other variables such as the characteristic ambient temperature variations and the thermostat set point are varied relative to the phase change temperature. Comparisons are made to the temporal variations of the heat flows without the application of the phase change material to those with the phase change material.     

Immune functions in beluga whales (Delphinapterus leucas): evaluation of phagocytosis and respiratory burst with peripheral blood leukocytes using flow cytometry

Flow cytometric assays using peripheral blood were developed to study phagocytosis and respiratory burst, the two major functions of neutrophils and among the most important non-specific defense mechanisms, in beluga whales. The use of flow cytometry avoids the problems associated with the isolation and purification of different cell types, and allows the measurement of a large number of cells (10,000) in a very short period of time. The methods described will be used to compare these functions in blood samples from highly contaminated beluga whales from the St. Lawrence and from relatively clean arctic beluga whales.     

Inhibition of N-type calcium channels: the only mechanism by which presynaptic alpha 2-autoreceptors control sympathetic transmitter release

Alpha 2-Adrenoceptors are known to inhibit voltage-dependent Ca2+ channels located at neuronal cell bodies; the present study investigated whether this or alternative mechanisms, possibly downstream of Ca2+ entry, underlie the presynaptic alpha 2-adrenergic modulation of transmitter release from chick sympathetic neurons. Using chick sympathetic neurons, overflow of previously incorporated [3H]noradrenaline was elicited in the presence of extracellular Ca2+ by electrical pulses, 25 mM K+ or 10 microM nicotine, or by adding Ca2+ to otherwise Ca(2+)-free medium when cells had been made permeable by the calcium ionophore A23187 or by alpha-latrotoxin. Pretreatment of neurons with the N-type Ca2+ channel blocker omega-conotoxin GVIA and application of the alpha 2-adrenergic agonist UK 14304 reduced the overflow elicited by electrical pulses, K+ or nicotine, but not the overflow caused by Ca2+ after permeabilization with alpha-latrotoxin or A23187. In contrast, the L-type Ca2+ channel blocker nitrendipine reduced the overflow due to K+ and nicotine, but not the overflow following electrical stimulation or alpha-latrotoxin- and A23187-permeabilization. The inhibition of electrically evoked overflow by UK 14304 persisted in the presence of nitrendipine and the L-type Ca2+ channel agonist BayK 8644, which per se enhanced overflow. In omega-conotoxin GVIA-treated cultures, electrically evoked overflow was also enhanced by BayK 8644 and almost reached the value obtained in untreated neurons. However, UK 14304 lost its effect under these conditions. Whole-cell recordings of voltage-activated Ca2+ currents corroborated these results: UK 14304 inhibited Ca2+ currents by 33%, nitrendipine caused a 7% reduction, and BayK 8644 increased the currents by 30%. Moreover, the dihydropyridines failed to abolish the inhibition by UK 14304, but pretreatment with omega-conotoxin GVIA, which reduced mean amplitude from 0.95 to 0.23 nA, entirely prevented alpha 2-adrenergic effects. Our results indicate that the alpha 2-autoreceptor-mediated modulation of noradrenaline release from chick sympathetic neurons relies exclusively on the inhibition of omega-conotoxin GVIA-sensitive N-type Ca2+ channels. Mechanisms downstream of these channels and voltage-sensitive Ca2+ channels other than N-type appear not to be important.     

Neocortical ectopias in BXSB mice: effects upon reference and working memory systems

BXSB mice have an approximately 40-60% incidence of neocortical ectopias in layer I of the prefrontal/motor cortex. Prior studies have found major behavioral differences between those with ectopias and their non-ectopic littermates. Some of these findings indicate that the two groups differ with respect to spatial reference and working memory. The purpose of this study was to measure reference and working memory in the same animals to test the hypothesis that the ectopics would have better reference memory but less effective working memory. The Lashley III maze has cul-de-sacs which must be eliminated, and T-choices where the animal has to decide whether to go left or right. Ectopic and non-ectopic mice were equally able to learn the maze and did not differ on cul-entry or T-choice errors. Then the maze was inverted and the animals were retested. Turning the maze upside down did not change the relative status of the blind alleys. Therefore, the reference memory knowledge from the prior week's training could be used to avoid entering the culs. However, inverting the maze caused a left-right mirror image reversal of the T-choices. Therefore, prior reference memory information would interfere with learning the new path through the maze, whereas working memory would enable the mouse to eliminate T-choice errors. Ectopic mice made less cul-entry errors and more T-choice errors than their non-ectopic littermates, as predicted.     

Degradable polyester scaffolds with controlled surface chemistry combining minimal protein adsorption with specific bioactivation

Advanced biomaterials and scaffolds for tissue engineering place high demands on materials and exceed the passive biocompatibility requirements previously considered acceptable for biomedical implants. Together with degradability, the activation of specific cell–material interactions and a three-dimensional environment that mimics the extracellular matrix are core challenges and prerequisites for the organization of living cells to functional tissue. Moreover, although bioactive signalling combined with minimization of non-specific protein adsorption is an advanced modification technique for flat surfaces, it is usually not accomplished for three-dimensional fibrous scaffolds used in tissue engineering. Here, we present a one-step preparation of fully synthetic, bioactive and degradable extracellular matrix-mimetic scaffolds by electrospinning, using poly(D,L-lactide-co-glycolide) as the matrix polymer. Addition of a functional, amphiphilic macromolecule based on star-shaped poly(ethylene oxide) transforms current biomedically used degradable polyesters into hydrophilic fibres, which causes the suppression of non-specific protein adsorption on the fibres’ surface. The subsequent covalent attachment of cell-adhesion-mediating peptides to the hydrophilic fibres promotes specific bioactivation and enables adhesion of cells through exclusive recognition of the immobilized binding motifs. This approach permits synthetic materials to directly control cell behaviour, for example, resembling the binding of cells to fibronectin immobilized on collagen fibres in the extracellular matrix of connective tissue.     

Enterococci concentrations in diverse coastal environments exhibit extreme variability

Fecal indicator bacteria (FIB) concentrations in a single grab sample of water are used to notify the public about the safety of swimming in coastal waters. If concentrations are over a single-sample standard, waters are closed or placed under an advisory. Previous work has shown that notification errors occur often because FIB vary more quickly than monitoring results can be obtained (typically 24 h). Rapid detection technologies (such as quantitative polymerase chain reaction) that allow FIB quantification in hours have been suggested as a solution to notification errors. In the present study, I explore variability of enterococci (ENT) over time scales less than a day that might affect interpretation of FIB concentrations from a single grab sample, even if obtained rapidly. Five new data sets of ENT collected at 10 and 1 min periodicities for 24 and 1 h, respectively, are presented. Data sets are collected in diverse marine environments from a turbulent surf zone to a quiescent bay. ENT vary with solar and tidal cycles, as has been observed in previous studies. Over short time scales, ENT are extremely variable in each environment even the quiescent bay. Changes in ENT concentrations between consecutive samples (1 or 10 min apart) greater than the single-sample standard (104 most probable number per 100 mL) are not unusual. Variability, defined as the change in concentration between consecutive samples, is not distinct between environments. ENT change by 60% on average between consecutive samples, and by as much as 700%. Spectral analyses reveal no spectral peaks, but power-law decline of spectral density with frequency. Power-law exponents are close to 1 suggesting ENT time series share properties with 1/f noise and are fractal in nature. Since fractal time series have no characteristic time scale associated with them, it is not obvious how the fractal nature of ENT can be exploited for adaptive sampling or management. Policy makers, as well as scientists designing field campaigns for microbial source tracking and epidemiology studies, are cautioned that a single sample of water reveals little about the true water quality at a beach. Multiple samples must be taken to gain a snapshot into the patchy structure of microbial water quality and associated human health risk.     

Contributions of Foot Traffic and Outdoor Concentrations to Indoor Airborne Aspergillus

Aspergillus is a mold genus that can cause allergies, asthma, and pulmonary infections in sensitive people; its particles are common in indoor air. Two potential contributors to indoor Aspergillus particles were examined in this field study: human activity (walking over carpet), and outdoor Aspergillus concentrations. Filtered air samples were collected outdoors and inside two carpeted hallways in public buildings, while measuring indoor foot traffic. Aspergillus concentrations were analyzed using quantitative Polymerase Chain Reaction (qPCR). A bivariate model was used to predict indoor Aspergillus concentrations based on foot traffic and outdoor Aspergillus concentrations. For 3 of 4 scenarios, most of the variation in indoor Aspergillus could be explained by the combined effect of outdoor Aspergillus concentrations and foot traffic, with particularly strong correlations during peak traffic times. In addition, indoor Aspergillus was significantly associated with outdoor Aspergillus in 2 of 4 scenarios, and with foot traffic in 2 of 4 scenarios. For 2 of 3 sampling campaigns, Aspergillus did not have a significant association either with gravimetric particulate matter ≤5 μm (PM₅), or with optically measured PM of 0.75–1 μm, 1–2 μm, 2–3.5 μm, or 3.5–5 μm. Controlled experiments, examining whether the foot traffic contribution was due to resuspension from carpeting or to shedding from clothing and/or human bodies, saw a significant increase in Aspergillus levels from resuspension. Although an increase was also seen for clothing over Tyvek suits, it was not statistically significant.     

Plasma Jet Machining

Plasma Jet Machining (PJM) is a surface figuring technology based on atmospheric plasma assisted chemical etching or deposition, respectively. In both cases a sub‐aperture plasma jet source is used combined with a CNC multi‐axes system for the processing of curved surfaces. It is under development for the surface figuring of a variety of optical materials by IOM for about 15 years. PJM is capable to figure deep aspheric or free‐form substrates with high material removal rate and high spatial resolution. Based on chemical reactions between plasma generated radicals and the surface PJM does not introduce any damage to the processed surface and sub‐surface region in contrast to abrasive techniques. Deterministic deposition of SiO_x layers and subsequent proportional transfer using ion beams or polishing is another plasma jet based technique for surface figuring that extends the range of machinable materials. The article gives an overview on the current state of PJM development in IOM and shows examples of its application.