超临界CO2混相驱油技术现状研究

针对我国低渗油田的特点、自然产能低、二氧化碳混相驱替的驱油机理、最小混相压力的确定,替中存在的气窜、气源、结垢等问题。地层压力下降陕等引采收率低的现状,介绍了以及适用混相驱替油田的标准,提出了混相驱     

Texturation of model clay materials using tape casting and freezing

The present work aimed to investigate the processing of textural clay based materials using tape casting together with freezing. Two model raw materials were used, namely: BIP kaolin from France and ABM montmorillonite from Mediterranean region. The mixtures of both clays were studied, whereby, the amount of montmorillonite was 0, 5, 10, 20 or 50 mass%. After tape casting, the as-obtained green bands were frozen into liquid nitrogen, lyophilized and then fired at 1050 °C or 1200 °C.The amount of montmorillonite appeared as a critical parameter that controls the cohesion of the dry products. For montmorillonite content ≥20 mass%, the products exhibited multiple cracks after lyophilisation. With lower montmorillonite content, the cohesion of the dry products was satisfactorily and a macroscopic cross-linked surface texturation was observed. After calcination at 1050 °C or 1200 °C, the texturation appeared well defined. Moreover, calcination at 1200 °C increased the densification of products and the occurrence of a glassy phase was noted.The combination of both tape casting and freezing (freeze tape casting) is a promising way to develop various clay-based and composites materials exhibiting unique microstructure organization and characteristics with potential application in the field sustainable and environmentally friendly filtration, adsorption or catalysis.     

Nitroxide-mediated polymerization of styrene initiated from the surface of fumed silica. Comparison of two synthetic routes

Nitroxide-mediated free radical polymerization of styrene was performed from 13 nm diameter fumed silica in two steps. First, an alkoxyamine, based on N-tert-butyl-N-(1-diethylphosphono-2,2-dimethylpropyl) nitroxide (DEPN) was covalently attached onto silica. Polystyrene chains with controlled molecular weights and narrow polydispersities were then grown from the alkoxyamine-functionalized nanoparticles surface in the presence of a ‘free’ sacrificial styrylDEPN alkoxyamine. Two strategies were investigated in order to immobilize the alkoxyamine initiator on the silica surface. In a first route, we synthesized a unimolecular alkoxyamine initiator carrying triethoxysilyl end groups reactive towards the silica surface. In a second route, the alkoxylamine was formed in situ by the simultaneous reaction of a polymerizable acryloxy propyl trimethoxysilane (APTMS), azobisisobutyronitrile (AIBN) and DEPN used as radical trap. In both cases, the grafting of both the initiator and the polystyrene chains was characterized and quantified by several techniques which allowed us to evaluate and compare the two strategies.     

Properties of phyllosilicate-based porous ceramics shaped by conventional tape casting and freeze tape casting

Silicate ceramics were shaped using tape casting (TC) and freeze tape casting (FTC) processes from three clays labeled HCR, KORS, and KCR. These clays exhibited mass content of 77% halloysite–10 Å, 29% kaolinite, and 98% kaolinite minerals, respectively. After casting the slurries, the dried tapes were sintered at 1200°C. The microstructure changes were characterized before and after sintering using scanning electron microscopy. The apparent porosity of TC samples was lower (36–47 vol.%) compared to values obtained with FTC samples (67–79 vol.%). The latter samples exhibited a highly textured porosity, with micron-sized pores aligned perpendicular to the tape surfaces. Upon sintering, the porosity of TC samples tended to decrease conversely to the case of FTC samples. Such behavior seemed related to the simultaneous effect of organic additives and ice templating. Consequently, the FTC samples showed a relatively low mechanical strength of 3–7 MPa and thermal conductivity of .14– .22 W m⁻¹ K⁻¹. After sintering, the mullite crystallization contributed to strengthen the bulk materials, helping to compensate for the detrimental effect of porosity on the stress to rupture and on thermal conductivity values.     

4‐Biphenylalanine‐ and 3‐Phenyltyrosine‐Derived Hydroxamic Acids as Inhibitors of the JumonjiC‐Domain‐Containing Histone Demethylase KDM4A

Overexpression of the histone lysine demethylase KDM4A, which regulates H3K9 and H3K36 methylation states, has been related to the pathology of several human cancers. We found that a previously reported hydroxamate‐based histone deacetylase (HDAC) inhibitor (SW55) was also able to weakly inhibit this demethylase with an IC₅₀ value of 25.4 μm . Herein we report the synthesis and biochemical evaluations, with two orthogonal in vitro assays, of a series of derivatives of this lead structure. With extensive chemical modifications on the lead structure, also by exploiting the versatility of the radical arylation with aryldiazonium salts, we were able to increase the potency of the derivatives against KDM4A to the low‐micromolar range and, more importantly, to obtain demethylase selectivity with respect to HDACs. Cell‐permeable derivatives clearly showed a demethylase‐inhibition‐dependent antiproliferative effect against HL‐60 human promyelocytic leukemia cells.     

Identification and Structure–Activity Relationship Studies of Small‐Molecule Inhibitors of the Methyllysine Reader Protein Spindlin1

The methyllysine reader protein Spindlin1 has been implicated in the tumorigenesis of several types of cancer and may be an attractive novel therapeutic target. Small‐molecule inhibitors of Spindlin1 should be valuable as chemical probes as well as potential new therapeutics. We applied an iterative virtual screening campaign, encompassing structure‐ and ligand‐based approaches, to identify potential Spindlin1 inhibitors from databases of commercially available compounds. Our in silico studies coupled with in vitro testing were successful in identifying novel Spindlin1 inhibitors. Several 4‐aminoquinazoline and quinazolinethione derivatives were among the active hit compounds, which indicated that these scaffolds represent promising lead structures for the development of Spindlin1 inhibitors. Subsequent lead optimization studies were hence carried out, and numerous derivatives of both lead scaffolds were synthesized. This resulted in the discovery of novel inhibitors of Spindlin1 and helped explore the structure–activity relationships of these inhibitor series.     

Oxidation with air of cyclohexanone to carboxylic diacids on carbon catalysts

Carbons derived from phenolic resins were used as catalysts for the aqueous phase oxidation of cyclohexanone at 140°C under air pressure. The reaction yielded mainly adipic, glutaric and succinic acids. The samples were modified by heat treatments in CO₂, air or N₂ at different temperatures and characterized to determine their surface area and porosity and to evaluate the functional groups on the surface. Treatments under CO₂ or air increased the oxidation activity. The selectivity to adipic acid was maximum (33%) after activation in air which greatly increased the surface concentration of oxygen-containing functional groups. However, it was not possible to attribute the selectivity to specific acidic, neutral or basic groups present at the surface of carbons. This revised version was published online in June 2006 with corrections to the Cover Date.     

Stability of ruthenium catalysts supported on TiO2 or ZrO2 in catalytic wet air oxidation

The stability of ruthenium catalysts supported on TiO₂ and ZrO₂ were studied in the wet air oxidation of aqueous solution of succinic and p-hydroxybenzoic acids taken as model effluent and on real effluents from the paper-pulp industry. Catalyst recycling experiments were conducted in batch reactor and long-term stability tests were conducted in trickle-bed reactor. In all experiments, ruthenium and support materials were perfectly stable to leaching, sintering and fouling. Ruthenium catalysts experienced a weak deactivation as they were exposed to air, e.g., in recycling experiments however the loss of activity occurred only after the first exposure and was completely reversible upon catalyst reduction. The deactivation was attributed to an over-oxidation of the catalyst surface particularly noticeable in the case of very small Ru-clusters (1 nm).     

Cytostatic activity of 1,10-phenanthroline derivatives generated by the clip-phen strategy

The cytostatic activities of a series of twelve 1,10-phenanthroline (Phen) derivatives and of their copper complexes were studied on L1210 murine leukemia cells. Large increases in the biological activity were observed for compounds of the 3-Clip-Phen series, in which two Phen moieties were bridged at their C3 positions by an alkoxy linker, the 3-pentyl-Clip-Phen derivative showing an IC(50) value of 130 nM while Phen shows an IC(50) value of 2500 nM under the same conditions. IC(50) values seemed to be modulated not only by the position, the nature, and the length of the linker of Clip-Phen but also by hydrophobicity. Since copper complexes of Phen are chemical nucleases and nucleic acids are thus a potential target for these compounds, the corresponding copper complexes were also studied. Copper complexation of the 3-Clip-Phen ligands did not increase their biological activities. Attempts to vectorize 3-Clip-Phen derivatives with a DNA binder such as spermine or with a cell-penetration peptide failed to increase their biological activity relative to the original 3-Clip-Phen series.