Measurement of self-diffusion coefficients in Li ionic conductors by using the short-lived radiotracer of 8Li

For the effective use of short-lived radioactive beams, soon to be available at the Tokai Radioactive Ion Accelerator Complex, the authors have developed a radiotracer method for diffusion studies in solids. The experimental test was performed by the measurement of the diffusion coefficients of Li in a sample of the compound βLiAl using an α-emitting radiotracer of ⁸Li (T_1/2=0.84 s). It was found that the time-dependent yields of the α particles from the diffusing ⁸Li that was initially implanted in the sample could be used as a measure of the diffusivity of the tracer in a nondestructive way. The method was applied to measure the self-diffusion coefficients of Li in βLiGa, and for investigating how the Li diffusion in the Li ionic conductors is affected by the concentration of atomic defects (i.e., the existence of the atomic vacancies of Li and the defects in Ga sites that are replaced by Li).     

A coarse-to-fine IP-driven registration for pose estimation from single ultrasound image

A fast registration making use of implicit polynomial (IP) models is helpful for the real-time pose estimation from single clinical free-hand Ultrasound (US) image, because it is superior in the areas such as robustness against image noise, fast registration without enquiring correspondences, and fast IP coefficient transformation. However it might lead to the lack of accuracy or failure registration.In this paper, we present a novel registration method based on a coarse-to-fine IP representation. The approach starts from a high-speed and reliable registration with a coarse (of low degree) IP model and stops when the desired accuracy is achieved by a fine (of high degree) IP model. Over the previous IP-to-point based methods our contributions are: (i) keeping the efficiency without requiring pair-wised correspondences, (ii) enhancing the robustness, and (iii) improving the accuracy. The experimental result demonstrates the good performance of our registration method and its capabilities of overcoming the limitations of unconstrained freehand ultrasound data, resulting in fast, robust and accurate registration.     

Fabrication of large area diffraction grating using LIGA process

X-ray imaging is a very important technology in the fields of medical, biological, inspection, material science, etc. However, it is not enough to get the clear X-ray imaging with low absorbance. We have produced a diffraction gratings for obtaining high resolution X-ray phase imaging, such as X-ray Talbot interferometer. In this X-ray Talbot interferometer, diffraction gratings were required to have a fine, high accuracy, high aspect ratio structure. Then, we succeeded to fabricate a high aspect ratio diffraction grating with a pitch of 8 μm and small area using a deep X-ray lithography technique. We discuss that the diffraction gratings having a narrow pitch and an large effective area to obtain imaging size of practical use in medical application. If the pitch of diffraction gratings were narrow, it is expected high resolution imaging for X-ray Talbot interferometer. We succeeded and fabricated the diffraction grating with pitch of 5.3 μm, Au height of 28 μm and an effective area of 60 × 60 mm².     

An optimum design of robotic food handling by using Burger model

This paper discusses an optimum design approach on robotic food handling by considering the characteristics of viscoelasticity of object. We pick up a traditional Japanese food, “Norimaki” as a typical example with the viscoelastic characteristics. We first show that the dynamic characteristics of Norimaki can be expressed by utilizing the Burger model. After testing the parameter sensitivity, we show an example of the optimum design for determining the combination of the hand stiffness and the operating velocity. We further show that the resultant plastic deformation can be formulated with the exact solution.     

A novel method for three-dimensional observation of the vascular networks in the whole mouse brain

A novel method for acquiring serial images suitable for three-dimensional reconstruction of vascular networks in the whole brain of mouse was developed. The brain infused with a White India ink-gelatin solution was fixed and embedded in paraffin containing Sudan Black B through xylene also containing Sudan Black B. Each sliced surface of the paraffin block was coated with liquid paraffin and its image was serially acquired. Coating with liquid paraffin extremely improved the quality of the image. The series of serial images was free of distortion and a three-dimensional image was reconstructed without the problem of the alignment and registration of adjacent images. The volume-rendered image indicated three-dimensional distribution of blood vessels in a whole brain. No ghost or shadow was observed on a volume-rendered image of the White India ink-gelatin infused brain. The z-axial resolution examined on the orthogonal sections reconstituted from serial images obtained at an interval of 5 mum showed no cross talk, indicating that the z-axial resolution was no larger than 5 mum. A proper understanding of the vascular system in a whole brain is indispensable to reveal the development of the vascular system in the brain of normal and genetically manipulated mouse and vascular alterations in pathological situation, such as stroke and neurodegenerative disease. Although simple and inexpensive, this method will provide fundamental information on the vascular system in a whole brain.     

Usefulness of newly developed 99mTc-labeled STA-R12 for tumor imaging

We synthesized four new tumor imaging agents, 99mTc-labeled metalloporphyrins (99mTc-STA-R12, -STA-R21, -STA-RN101 and -ATN-12) for the tumor imaging. We compared the differences of tumor imaging potency among these agents in CDF1 mice implanted with colon 26 tumor. Tumor images with these agents were obtained by using digital gamma-camera (RC135-E, Hitachi, Tokyo) and the biodistributions were analyzed by computerized medical radionuclide imageanalyser (RP-200, Hitachi, Tokyo). The highest tumor organ ratio and the excellent tumor image were obtained by 99mTc-STA-R12 (13,17-Bispropanyl aspartic acid-3-ethenyl-8-[N,N',N",N"-tetrakis (carboxylmethyl-2,7,12,18-tetramethyl-porphyrinato]-manga nes e(III). The maximum concentration of 99mTc-STA-R12 in tumor tissue was observed at around 120 minutes after i.v. injection. On the contrary, the uptake rates of other organs and tissues such as liver, brain, muscle, lung, bone and blood continuously decreased. The rapid accumulation of STA-R12 in cancer tissue and the clearance from other tissue suggested a potential usefulness of this compound for tumor imaging agent.     

Cooling of3He-4He dilute solution down to 97 μK. Thermal boundary resistance between dilute solution and metal powder

We have cooled a³He-⁴He dilute solution down to 97 K, which is the lowest temperature ever been achieved in a dilute mixture. However, there is no sign of the superfluid transition of³He quasiparticles in the solution. In the sub-millikelvin region, we have measured the thermal boundary resistance between the solutions and sintered metal powder as a function of temperature T. We find that the thermal boundary resistence is proportional to T^–2 below 1 mK and that the resistance shows a strong dependence on magnetic fields below 0.1 T. These results suggest that the magnetic coupling is dominant in this temperature region. We have also estimated the heat leak into the dilute solution. It is found that the heat leak is proportional to the power of one third of inverse time, and the main source of the heat leak is ascribed to the viscous movement of³He quasiparticles.     

A superhydrophilic titanium implant functionalized by ozone gas modulates bone marrow cell and macrophage responses

Bone-forming cells and M? play key roles in bone tissue repair. In this study, we prepared a superhydrophilic titanium implant functionalized by ozone gas to modulate osteoconductivity and inhibit inflammatory response towards titanium implants. After 24 h of ozone gas treatment, the water contact angle of the titanium surface became zero. XPS analysis revealed that hydroxyl groups were greatly increased, but carbon contaminants were largely decreased 24 h after ozone gas functionalization. Also, ozone gas functionalization did not alter titanium surface topography. Superhydrophilic titanium (O₃–Ti) largely increased the aspect ratio, size and perimeter of cells when compared with untreated titanium (unTi). In addition, O₃–Ti facilitated rat bone marrow derived MSCs differentiation and mineralization evidenced by greater ALP activity and bone-like nodule formation. Interestingly, O₃–Ti did not affect RAW264.7 M? proliferation. However, naive RAW264.7 M? cultured on unTi produced a two-fold larger amount of TNFα than that on O₃–Ti. Furthermore, O₃–Ti greatly mitigated proinflammatory cytokine production, including TNFα and IL-6 from LSP-stimulated RAW264.7 M?. These results demonstrated that a superhydrophilic titanium prepared by simple ozone gas functionalization successfully increased MSCs proliferation and differentiation, and mitigated proinflammatory cytokine production from both naive and LPS-stimulated M?. This superhydrophilic surface would be useful as an endosseous implantable biomaterials and as a biomaterial for implantation into other tissues.     

Isolation and characterization of a novel human pancreas-specific gene, pancpin, that is down-regulated in pancreatic cancer cells

We reviewed 19 children and adolescents with cervical spine congenital synostosis as in Klippel-Feil syndrome (KFS), with an average follow-up of 12.5 years. We paid particular attention to neurologic complications associated with cervical spine abnormalities. Five patients were affected by neurologic complications; four underwent a surgical procedure; and 14 had no neurologic finding. Two had hypermobility at one level, and one had hypermobility at two levels. We found that the more numerous the occipito-C1 abnormalities, the more significant the neurologic risk. In contrast, this risk was not related to the number of "mobile blocks" or to age. Various mechanisms of neural complications have been studied in the literature: medullary abnormality, spinal instability, narrowing of the cervical canal, and vascular dysfunction. Surgery is usually thought to be required in cases with neurologic complications. The indication for surgery is, however, less clear in cases of pure instability without neurologic involvement because surgery is likely to increase the future risks at mobile disks either above or below the fuse level. Careful clinical and radiologic observation is necessary in such patients. Magnetic resonance imaging (MRI) with lateral views in flexion and extension seem to be the best method for detecting impingement of the spine on the cord.