Design and Performance of a DSI Terminal for Domestic Applications

The development of a microprocessor-controlled 96/48 DSI terminal is described. The terminal is intended for domestic use, and is designed so as to maximize compatibility with existing digital carrier systems, it merges four T1 signals into two T1 compatible bit streams for transmission. The terminal is given sufficient excess capacity to accommodate voiceband data, while retaining toll-grade transmission quality for speech. Implementation approaches and considerations in both calculated and measured system characteristics are described.     

Adherent natural soils on fiber surfaces

Adherent natural soils on fiber surfaces have been studied with the scanning electron microscope. The soils on the fiber surface resemble oily soil.     

Experimental and numerical investigation on combustion characteristics of premixed hydrogen/air flame in a micro-combustor with a bluff body

Combustion characteristics of lean hydrogen/air mixture in a planar micro-channel with a bluff body were investigated experimentally and numerically. Effects of the inlet velocity and equivalence ratio on the blow-off limit, combustion efficiency and exhaust gas temperature were examined. The results show that the blow-off limit is greatly extended as compared with that of the micro-combustor without a bluff body. Moreover, the blow-off limit increases as the equivalence ratio is increased from 0.4 to 0.6. Furthermore, with the increase of inlet velocity, the flame front is prolonged and becomes narrower, and the high temperature segment of outer wall shifts downstream. In addition, the combustion efficiency and exhaust gas temperature increase first and then decrease with the increase of the inlet velocity. Finally, comparatively high combustion efficiency can be maintained over the whole combustible velocity range at a moderate equivalence ratio.     

A new approach for simulating aerodynamic vibrations of structures in a wind tunnel—development of an experimental system by means of hybrid vibration technique

The present paper describes a newly proposed technique for simulating aerodynamic vibration of structures, which is referred to as the hybrid vibration technique or HVT. This technique is a combination of step-by-step computer calculation and measurement of the aerodynamic force acting on a model structure in a wind tunnel test. Even though the HVT can be applied effectively, problems still exist with respect to obtaining accurate simulations. These problems include response delay in controlling the model behavior and the inertia force component present in the measured aerodynamic force. Techniques for compensating for response delay and for eliminating inertia force from measured aerodynamic force are applied to a developed system based on HVT simulations of aerodynamic vibration of elastic structures and structures exhibiting elasto-plastic behavior are performed by means of the newly developed system. The effectiveness of the techniques for compensating for the response delay and eliminating the inertia force can be confirmed from the results of the simulations. In addition, the possibility and applicability of HVT is indicated.     

氘团簇离子（d^＋3）与固体相互作用过程中的团簇行为研究

讨论了由三个氘原子组成的氘团簇离子束与独立氘离子束在轰击固体靶时,在原子过程呼Ｄ－Ｄ核聚变过程中体现出的差别。对氘团簇与固体靶相互作用的机理进行了分析。     

Hydrolysis of human horny cells by alkaline protease: Morphological observation of the process

The interaction of highly purified alkaline protease fromBacillus sp. KSM-K16 with the horny cells of human skin contained in skin grime was directly visualized by electron microscopy. It became clear that the protease first penetrates the horny cells and then adsorbs, mainly onto the internal structure of the cells at the initial stage of hydrolysis, and directly hydrolyzes the keratin filaments, though the marginal band surrounding them retains its original shape. Then, hydrolysate produced from the keratin filaments flows out of the cell, and early in the hydrolysis process keratin filaments decrease and then disappear, leaving a marginal band, i.e., the cell turns to a hollow state. As a result, the remaining marginal band loses support from inside the cell, thus promoting cleavage and dispersion. Until this stage in the protease reaction, the remarkable liberation of hydrolysis products as water-soluble protein does not occur.     

Development of a new seminested PCR method for detection of Legionella species and its application to surveillance of legionellae in hospital cooling tower water

The presence of PCR inhibitors in water samples is well known and contributes to the fact that a practical PCR assay has not been developed for legionella surveillance. In this study, we devised a new seminested PCR assay for detection of Legionella spp. in water samples as a means of overriding the PCR inhibitors without loss of sensitivity. The seminested PCR assay utilized primers to amplify the 16S rRNA gene (LEG primers) of 39 Legionella spp. The assay was specific to legionellae, and the sensitivity was 1 fg of extracted Legionella DNA in laboratory examination. To evaluate the feasibility and sensitivity of the PCR assay in identifying the presence of legionellae, it was used to survey Legionella contamination in the water of 49 cooling towers of 32 hospitals. A commercially available EnviroAmp Legionella kit and a culture method were also used in the survey for comparison with the seminested PCR assay. The detection rates of legionellae in the samples were 91.8% (45 of 49) by the PCR assay and 79.5% (39 of 49) by the culture method. The EnviroAmp kit revealed that 30.6% of the water samples (15 of 49) contained inhibitors of the PCR amplification. However, the seminested PCR assay could produce the Legionella-specific DNA bands in 14 of the 15 samples. Although 8 of the 14 samples were positive in the first-step PCR, 6 of the 14 samples became positive in the second-step PCR. These results suggest that the effect of PCR inhibitors in samples, if any, can be reduced because of the dilution of the sample in the second-step PCR and that sensitivity of detection can be increased by the second-step PCR. Thus, the seminested PCR assay with LEG primers to amplify the 16S rRNA gene of 39 Legionella spp. was a practical and sensitive method to detect Legionella spp. in water samples.     

Immunohistological differentiation of benign thyroid follicular cell tumors from malignant ones: usefulness of anti-peroxidase and JT-95 antibodies

An immunohistological investigation using anti-thyroid peroxidase (PO) and JT-95 (JT) antibodies was conducted on surgical specimens of papillary carcinoma (n = 12), follicular carcinoma (n = 8), follicular adenoma with prominent papillary structure (n = 12), follicular adenoma (n = 8) and adenomatous goiter (n = 8). In benign lesions, follicle-forming and papillae-forming epithelia showed positive staining with anti-PO antibody. In 26 of 28 benign lesions, PO-positive areas covered 50% or more of the cut surface area of the lesions. However in carcinomas, PO-positive areas were non-existent (13/20) or only focal (7/20) and the papillae did not stain. The incidence of JT-positive cases was higher in papillary carcinomas (12/12) than in other lesions (13/36). JT-positive areas were much wider than PO-positive areas in papillary carcinomas, whereas in benign lesions, PO-positive areas were wider than or at least roughly equal to, JT-positive areas. Follicular carcinomas did not stain or stained only focally with these antibodies. In conclusion, these two antibodies seem useful in differentiating benign from malignant follicular cell tumors.     

Synthesis of fixed-structure robust controllers using a constrained particle swarm optimizer with cyclic neighborhood topology

The purpose of this paper is to develop design scheme based on an easy-to-use meta-heuristic approach with superior reliability and validity for fixed-structure robust controllers, satisfying both multiple control specifications and system stability conditions. For this purpose, a particle swarm optimizer is first developed, which reduces the probability of premature convergence to local optima in the PSO (particle swarm optimization) by exploiting the particle’s local social learning based on the idea of cyclic-network topology. Next, it is shown how to obtain a fixed-structure robust controller with constraints on multiple H_∞ specifications and system stability based on the developed PSO technique incorporated with a simple constraint handling method. Finally, typical numerical examples are studied to show the applicability of the proposed methodology to the synthesis of fixed-structure robust controllers. These examples clearly verify that the developed design scheme gives a novel and powerful impetus with remarkable reliability to fixed-structure robust controller syntheses.