Multi-walled carbon nanotube-reinforced copper nanocomposite coating fabricated by low-pressure cold spray process

Multi-walled carbon nanotube (MWCNT)-reinforced copper (Cu) nanocomposite coatings were successfully deposited on aluminum (Al) substrate by a cold spraying process at a low pressure. The microstructure and the Raman spectrum of the low-pressure-cold-sprayed MWCNT–Cu nanocomposite coating showed that the MWCNTs maintained their tube structure in the Cu matrix, even though structural damage to the MWCNTs increased slightly. MWCNT–Cu nanocomposite-coated Al exhibits higher thermal diffusivity than pure-Cu-coated Al with a comparable hardness. The higher thermal diffusivity of the MWCNT–Cu coating could be explained by the dispersion of MWCNTs within the clean and closed CNT/Cu interfaces, which were achieved with the aid of compressive stress during the cold spraying.     

Novel Perovskite-Type Oxide Catalysts for Dehydrogenation of Ethylbenzene to Styrene

We investigated novel LaMnOx perovskite-oxide (ABO₃) catalysts for effective catalytic dehydrogenation of ethylbenzene to produce styrene monomer. Comparison with industrial Fe–K catalyst, our La_0.8Ba_0.2Mn_0.6Fe_0.4O_3-δ catalyst showed higher activity. Results show that the A-site in perovskite-type oxides affected catalytic dehydrogenation activities and that the B-site affected stability of the activities.     

Characterization of Silicon Carbide–Silicon Nitride Composite Ultrafine Particles Synthesized Using a CO2 Laser by Silicon-29 Magic Angle Spinning NMR and ESR

The structure of silicon carbide–silicon nitride (SiC–Si₃N₄) composite particles synthesized using a CO₂ laser was studied by magic angle spinning nuclear magnetic resonance (MAS-NMR) and electron spin resonance (ESR). The structure around Si atoms changed by introducing N. C atoms around Si were substituted by N atoms, and N-rich configurations around Si atoms increased stepwise as the N content increased. The low N content composite particles consisted of mainly SiC phase containing dissolved N. N atoms were partly present in β-SiC microcrystal and partly in the grain boundary layer in the particle. N atoms were tetrahedrally surrounded by four Si atoms in β-SiC microcrystal and were trivalent state bonded to three Si atoms in the grain boundary layer. The high N content particles consisted of SiC, Si₃N₄, and amorphous phases, whose amount depended on N content.     

<Emphasis Type="Italic">Brassica rapa</Emphasis> var. <Emphasis Type="Italic">japonica</Emphasis> Leaf Extract Mediated Green Synthesis of Crystalline Silver Nanoparticles and Evaluation of Their Stability,Cytotoxicity and Antibacterial Activity

Silver nanoparticles (AgNPs) were successfully synthesized from the reduction of Ag⁺ using AgNO₃ solution as a precursor and Brassica rapa var. japonica leaf extract as a reducing and capping agent. This study was aimed at synthesis of AgNPs, exhibiting less toxicity with high antibacterial activity. The characterization of AgNPs was carried out using UV–Vis spectrometry, energy dispersive X-ray spectrometry, fourier transform infrared spectrometry, field emission scanning electron microscopy, X-ray diffraction, atomic absorption spectrometry, and transmission electron microscopy analyses. The analyses data revealed the successful synthesis of nano-crystalline Ag possessing more stability than commercial AgNPs. The cytotoxicity of Brassica AgNPs was compared with commercial AgNPs using in vitro PC12 cell model. Commercial AgNPs reduced cell viability to 23% (control 97%) and increased lactate dehydrogenase activity at a concentration of 3 ppm, whereas, Brassica AgNPs did not show any effects on both of the cytotoxicity parameters up to a concentration level of 10 ppm in PC12 cells. Moreover, Brassica AgNPs exhibited antibacterial activity in terms of zone of inhibition against E. coli (11.1?±?0.5 mm) and Enterobacter sp. (15?±?0.5 mm) which was higher than some previously reported green-synthesised AgNPs. Thus, this finding can be a matter of interest for the production and safe use of green-AgNPs in consumer products.     

HPLC Elution Behavior of La-Fullerenes Investigated by Radiochemical Method

HPLC elution behaviors of La-fullerenes were investigated by use of the radiochemical methods. Elution curves of La-fullerenes could be observed in detail for the first time, and the persistent presence of La in the whole elution curve was demonstrated. Production of La-fullerenes containing a radioactive ¹⁴⁰La could be achieved for the first time.     

One-Step Generation of Multiple Gene-Edited Pigs by Electroporation of the CRISPR/Cas9 System into Zygotes to Reduce Xenoantigen Biosynthesis

Xenoantigens cause hyperacute rejection and limit the success of interspecific xenografts. Therefore, genes involved in xenoantigen biosynthesis, such as GGTA1, CMAH, and B4GALNT2, are key targets to improve the outcomes of xenotransplantation. In this study, we introduced a CRISPR/Cas9 system simultaneously targeting GGTA1, CMAH, and B4GALNT2 into in vitro-fertilized zygotes using electroporation for the one-step generation of multiple gene-edited pigs without xenoantigens. First, we optimized the combination of guide RNAs (gRNAs) targeting GGTA1 and CMAH with respect to gene editing efficiency in zygotes, and transferred electroporated embryos with the optimized gRNAs and Cas9 into recipient gilts. Next, we optimized the Cas9 protein concentration with respect to the gene editing efficiency when GGTA1, CMAH, and B4GALNT2 were targeted simultaneously, and generated gene-edited pigs using the optimized conditions. We achieved the one-step generation of GGTA1/CMAH double-edited pigs and GGTA1/CMAH/B4GALNT2 triple-edited pigs. Immunohistological analyses demonstrated the downregulation of xenoantigens; however, these multiple gene-edited pigs were genetic mosaics that failed to knock out some xenoantigens. Although mosaicism should be resolved, the electroporation technique could become a primary method for the one-step generation of multiple gene modifications in pigs aimed at improving pig-to-human xenotransplantation.     

Influence of cold-rolling and annealing conditions on formability of aluminium alloy sheet

Using an Al-Mg-Cu alloy developed for auto body panels, strip sheets are experimentally produced by various cold-rolling and annealing procedures. Tensile and metallographic properties of the sheets and their relations are examined to attain high formability. The elongation is closely related to the grain size, and increases with the final annealing temperature. The rolling texture influences the plastic anisotropy, the Lankford value of the sheets. The comparatively high Lankford values are obtained under the condition that both the intermediate and the final annealing temperatures are higher and the reduction ratio after the intermediate annealing is smaller.     

Serum selenium contents and the risk of cancer

To investigate the relationship between serum Se contents and the risk of cancer, 4857 serum samples were obtained from cancerous (2730) and non-cancerous patients (2127). In this cohort, the incidence of cancer in the non-cancerous patients was followed for the subsequent 3 years. The serum Se level of non-cancerous patients who later developed cancer during the 3 years was determined and compared with that of the non-cancerous patients. A high incidence of cancer was observed in the lower serum Se patients of the non-cancerous group. The serum Se levels of cancerous patients were significantly lower than in non-cancerous patients. These results suggest that the low serum Se level in cancerous patients may not be induced by the tumor but it was more likely already present before the tumor. To calculate the odds ratio, cancerous and non-cancerous patients were divided into group of less than 110 ppb and more than 111 ppb group in serum Se. The odds ratio was estimated to be 1.95, suggesting the high risk of cancer in the low serum Se group.     

Effect of insulin fragments on biological activity of insulin and desoctapeptide insulin. I. Potentiation of biological activities

Four derivatives of the insuln B-chain COOH-terminal pentapeptide Arg-Gly-Phe-Phe-Tyr (B22-26) were synthesized and shown to be inactive alone. In the presence of submaximal concentrations of insulin or desoctapeptide insulin, peptides at concentrations of 10(-4) M and higher, markedly stimulated the actions of insulin on rat adipocytes including labeled glucose oxidation, activation of glycogen synthase, and stimulation of 2-deoxyglucose transport. The B-chain COOH-terminal heptapeptide, Gly-Phe-Phe-Tyr-Thr-Pro-Lys (B23-29) was inactive alone or in the presence of submaximal concentrations of insulin or desoctapeptide insulin, suggesting that argnine is required. Dose response curves of insulin, and desoctapeptide insulin for labeled glucose oxidation by rat adipocytes were shifted 1 log concentration unit to the left in the presence of peptide. Peptide shortened the lag time of labeled glucose oxidation and markedly enhanced the rate of 14CO2 production following the lag time. Peptides also enhanced insulin-like activities of concanavalin A and nonsuppressible insulin-like activity P.     

High-speed GaN growth and compositional control of GaN-AlGaNsuperlattice quasi-ternary compounds by RF-radical source molecular beamepitaxy

Novel growth technologies of III-nitrides for fabricating optical devices by molecular beam epitaxy using RF-plasma excited nitrogen (RF-MBE) were investigated. A relatively high-growth rate, up to 1.4 μm/h of GaN with high-electrical and high-optical quality was obtained. The concept of AlGaN quasi-ternary (QT) compounds, consisting of GaN-AlGaN short period superlattice, was demonstrated and the Al composition was controlled with a shutter control method in the range of 0-0.47. Using the QT technology, a GaN-Al_0.07Ga_0.933N-Al_0.3Ga_0.7 N multiquantum-well heterostructure was fabricated to show the effectiveness of the method