Production of Carbon Nanotube by Ethylene Decomposition over Silica-Coated Metal Catalysts

Formation of carbon nanofibers (CNFs) and carbon nanotubes (CNTs) through the decomposition of ethylene at 973 K was achieved using various metal catalysts covered with silica layers. CNFs of various diameters were formed by ethylene decomposition over a Co metal catalyst supported on the outer surface of the silica. In contrast, silica-coated Co catalysts formed CNTs with uniform diameters by ethylene decomposition. Silica-coated Ni/SiO₂ and Pt/carbon black also formed CNTs with uniform diameters, while CNFs and CNTs with various diameters were formed over Ni/SiO₂ and Pt/carbon black without a silica coating. These results indicate that silica layers that envelop metal particles prevent sintering of the metal particles during ethylene decomposition. This results in the preferential formation of CNTs with a uniform diameter.     

Measurement of particle concentration in powder coating process using capacitance computed tomography and wavelet analysis

Capacitance computed tomography techniques were used to visualize particles movement in the draft tube of a spouted fluidized bed for the coating process of drug production. A total of 512 frames images of the particle concentration distribution were obtained at 10-millisecond intervals over a coating time of 5 min using a capacitance computed tomography system. The three-dimensional capacitance CT images (time and two-dimensional space images) were decomposed to wavelet time and space levels to extract the dominant particle distribution feature using three-dimensional discrete wavelet multiresolution at different coating times. As a result, the time and space dominant particle distribution with a specific frequency level can be visualized.     

Transparent Nano-Composites Ceramics by Annealing of Amorphous Phase in the HfO2-Al2O3-GdAlO3 System

We have succeeded in fabricating transparent nano-structured ceramics by annealing of the amorphous phase obtained by the solidification of the eutectic melt in the ternary system HfO₂− Al₂O₃− GdAlO₃. The ceramics annealed at 1273 K for 6 hr contained 5-10-nm cubic hafnia grains, and those annealed at 1273 K for 72 hr contained both cubic hafnia and gadolinium aluminum garnet grains 5-10 nm in size. They showed high transparency. Annealing at 1473 K, however, resulted in grain growths that brought about non-transparency.     

Adsorption isotherms of pigments from alkali-refined vegetable oils with clay minerals

Adsorption isotherms of pigments from alkali-refined oils (rapeseed, soybean, wheatgerm, safflower, corn, cottonseed and sunflower) were measured to investigate the applicability of the Langmuir and Freundlich equations and to elucidate the adsorption characteristics of pigments on sepiolites and standard activated clay. The Freundlich equation was more applicable to the experimental adsorption isotherms. The equilibrium amount adsorbed, acidity, pore size distribution and inflection of the Freundlich isotherms could be explained by assuming that pigments were adsorbed on the stronger acid sites in smaller pores at low concentration, and then in the larger ones when the concentration increased. The amount adsorbed increased with a rise in adsorption temperatures from 70 to 110°C, and the heat of adsorption was below 10 kcal/mol. The results indicate that pigments were physically adsorbed on the acid sites activated at higher adsorption temperatures.     

Decomposition of Carbon Dioxide to Carbon with Active Wustite at 300°C

Active wustite (FeδO, with a δ value of 0.98) was prepared by keeping normal wustite (δ value of 0.94) in a N₂ atmosphere at 300°C for 10 min. This reaction is given by (4δ₂–3)Fe_δ1O→(4δ₁–3)Fe_δ2O + (δ₂–δ₁)Fe₃O₄ where δ₁= 0.94 and δ₂= 0.98. The equation indicates that the normal wustite undergoes eutectoid decomposition into active wustite and stoichiometric magnetite (Fe₃O₄). Carbon dioxide (1.013 × 10⁵ Pa) was almost completely (100%) decomposed into carbon (zero valence) by the active wustite at the low temperature of 300°C, which was associated with the transformation of the active wustite into the stoichiometric magnetite. The internal pressure of the reaction cell eventually became a vacuum.     

Application of an Ion-Packing Model Based on Defect Clusters to Zirconia Solid Solutions: I, Modeling and Local Structure of Solid Solutions

Oxygen vacancies can be introduced into zirconia solid solution ZrO₂–MO _u ( u = 1 and 1.5) to maintain electroneutrality. Recently, the local structures around Zr⁴⁺ and M^{2 u +} ions in ZrO₂–MO _u solid solutions have been studied through EXAFS spectroscopy, diffuse scattering analysis, and single-crystal structure analysis. The present study constructs an ion-packing model for zirconia solid solutions based on some defect cluster models. The decrease of cell volume with the occurrence of vacancies is assumed to be expressed by decreasing the coordination number (CN) of cations around the vacancy. The distribution of CNs in a solid solution was calculated from a certain defect cluster model. The average interatomic distances, the average CN, and the short-range order parameters were calculated using this distribution of CNs. The local structures calculated from the model were compared with experimental data in the systems ZrO₂–MO_1.5 (M = Y, Gd, Yb, and Ca). In the ZrO₂–YO_1.5 system, the r (s–O) interatomic distance, where s represents Zr⁴⁺ or Y³⁺ and O represents O²⁻, decreased with Y content and therefore vacancy content. The probability of finding Y³⁺ around a vacancy increases with increasing yttria content from a comparison of the calculated results with the ones from recent EXAFS studies. The present model can qualitatively explain compositional and size dependences of the dopant on various local structures.     

A Novel Preparation Method for Foamed Silica Ceramics by Sol-Gel Reaction and Mechanical Foaming

A simple method for obtaining silica foam has been developed by combining sol-gel reaction and mechanical foaming without added organic pore formers, in order to reduce generation of CO₂ and harmful gases by decomposition of the organic compounds. The silica foam was prepared by mechanically foaming the silica sol and controlling the viscosity change and gelling. The gelation time of the silica sol can be varied from 10 minutes to 3 hours by changing the pH, temperature and concentration of the surfactant added as a foam stabilizer. The dried silica gel foam was calcined at 600°C then fired at 1000°C to obtain sintered silica foam. The porosity and average pore size of the silica foam was 84% and 140 m, respectively. The bending strength and gas permeability of the sintered silica foam was 2.4 MPa and 9.4 × 10^–11 m², respectively.     

Improvement of Selectivity for Partial Hydrogenation of Benzene by Rare Earth Nitride Upon NH3 Treatment

For the liquid-phase partial hydrogenation of benzene at 483 K, the selectivity toward cyclohexene was greatly improved upon treating rare earth nitride with ammonia. For YbN obtained by thermal decomposition of Yb(NH₂)₂ at 1173 K, the selectivity of the NH₃-treated YbN was 75%, in contrast to nil for the untreated YbN.     

Spider Mites Assess Predation Risk by Using the Odor of Injured Conspecifics

When a predatory mite, Amblyseius womersleyi is present, Tetranychus kanzawai takes refuge on its webs during a quiescent stage. To examine the factors responsible for the antipredator behavior of T. kanzawai, we exposed T. kanzawai to the odor of conspecifics, A. womersleyi, and both T. kanzawai and A. womersleyi. The proportion of T. kanzawai females that took refuge was significantly higher when they were exposed to the odor of `both T. kanzawai and A. womersleyi.' Furthermore, the proportion of T. kanzawai females that took refuge was significantly higher when they were exposed to injured conspecifics than to intact conspecifics. These results suggest that T. kanzawai assesses predation risk, at least in part, by using the odor of injured conspecifics.