Hyperbranched poly(arylene ether phosphine oxide)s

Summary New AB₂ and A₂B monomers, bis(4-fluorophenyl)-4'-hydroxyphenylphosphine oxide and bis(4-hydroxyphenyl)-4'-fluorophenyl-phosphine oxide were prepared and converted to corresponding hyperbranched poly(arylene ether phosphineoxide)s with hydroxyphenyl and fluorophenyl end functional groups. While the dihydroxy monomer gave a low molecular weight polymer, the difluoro monomer produced a high molecular weight hyperbranched polymer. The glass transition temperature of the obtained polymers was 266°C and 230°C, and 5% weight loss temperature was 491 °C and 391 °C, respectively. The fluorophenyl-terminated hyperbranched polymer was soluble in CHCl₃, but the hydroxyphenyl-terminated polymer was not soluble in CHCl3 even though it has lower molecular weight than the fluorophenyl-terminated polymer, indicating that properties of the hyperbranched polymers markedly depend on end functional groups as well as their molecular weight. Received: 23 August 2000/Revised version: 19 October 2000/Accepted: 31 October 2000     

Temporal-Talbot-effect-based preprocessing for pattern-effect reduction in all-optical clock recovery using a semiconductor-optical-amplifier-based fiber ring laser

We propose and experimentally demonstrate the temporal-Talbot-effect (TTE)-based preprocessing for the pattern-effect reduction in the all-optical clock recovery using a semiconductor-optical-amplifier (SOA)-based fiber ring laser (SOA-FRL). The TTE-based preprocessing successfully reduced the pattern effects of the recovered clock pulses, so that the 10-GHz clear optical clock pulses were recovered from a 10-Gbit/s return-to-zero on–off keying (RZ-OOK) pseudo-random bit sequence (PRBS) optical signal. “Peak variation” and “Pattern-dependent intensity noise (PDIN)” were proposed and were utilized as parameters to quantitatively evaluate the pattern effects, from which recovered clock pulses suffer, in the temporal domain and the frequency domain, respectively. Peak variation was reduced from 77.2% to 36.2%, and PDIN was improved from ?103 dBc/Hz to ?110 dBc/Hz with the aid of the TTE-based preprocessing. Furthermore, we examined the tolerance of the proposed technique by intentionally deviating the input signal’s bit-rate by ±190 Mbit/s (±2% of the bit-rate) from the optimum condition for the TTE. As compared with the PDIN value for the pulse train obtained by the direct injection of the non-processed signal into the SOA-FRL, the PDIN of the recovered clock pulses using the preprocessed signal indicated improvements over the entire measurement range of ±190 Mbit/s, which corresponds to the wavelength-dispersion deviation of ±56 ps/nm (±4% of the wavelength-dispersion applied to the input signal) from the optimum value.     

Micro 3D measurement method using SEM

Three diamensional (3D) measurement method by Scanning Electron Microscope (SEM) has already been proposed by using the principle of shadow moiré. In the method, the image of original grid in shadow moiré image must be clearly removed in fringe analysis process in order to perform high resolution analysis. A new method based on the principle of projection moiré is proposed to solve the trouble concerning the grid. In this paper, the mechanism of producing some shadows of grid on the surface of the object by back scattering electron beam in the new method is discussed. Fringe image as shadow of grid is analyzed by Wavelet transform. The precise 3D measurement is realized by using the phenomenon of shadows of grid. Furthermore, a 3D micro structure on the head of a hard disk is measured. From the comparison of results obtained by Atomic Force Microscope (AFM), it is confirmed that the proposed method has high-resolution power(about 20nm).     

Fundamental welding R&D results for manufacturing vacuum vessel of JT-60SA

The real vacuum vessel (VV) manufacturing of JT-60SA has started since November 2009 at Toshiba. Prior to starting manufacturing, fundamental welding R&Ds had been performed by three stages. In the first stage, primary tests for screening welding method were performed. In the second stage, the trial welding for 1 m-long straight and curved double shell samples were conducted. The dependences of welding quality and distortion on the welding conditions, such as arc voltage and current, setting accuracy, welding sequence, and the shape of grooves were studied. In addition, welding condition with low heat input was explored. In the last stage, fabrication sequence was confirmed and established by the trial manufacturing of the 20° upper half mock-up [1]. This paper presents the R&D results obtained in the first and second stages.     

Thermotropic and Barotropic Phase Behavior of Phosphatidylcholine Bilayers

Bilayers formed by phospholipids are frequently used as model biological membranes in various life science studies. A characteristic feature of phospholipid bilayers is to undergo a structural change called a phase transition in response to environmental changes of their surroundings. In this review, we focus our attention on phase transitions of some major phospholipids contained in biological membranes, phosphatidylcholines (PCs), depending on temperature and pressure. Bilayers of dipalmitoylphosphatidylcholine (DPPC), which is the most representative lipid in model membrane studies, will first be explained. Then, the bilayer phase behavior of various kinds of PCs with different molecular structures is revealed from the temperature–pressure phase diagrams, and the difference in phase stability among these PC bilayers is discussed in connection with the molecular structure of the PC molecules. Furthermore, the solvent effect on the phase behavior is also described briefly.     

Thermodynamic assessment of systems of actinide or rare earth with Cd

A pyrometallurgical process is being developed for recycling nuclear reactor fuels. Thermodynamic information on multicomponent systems of actinides and rare earths (REs) with liquid Cd is very useful in the design of a process in which a liquid Cd electrode is used for the selective recovery of Pu and U, and a reductive extraction process using a molten salt/liquid Cd system for the recovery of minor actinides, such as Np, Pu, etc. A key issue in the design of these processes is a variation in solubility or activity of actinides or REs in multielement systems. In the present study, phase diagrams of U-Cd, Pu-Cd, Np-Cd, Y-Cd, La-Cd, Ce-Cd, Pr-Nd, Nd-Cd, and Gd-Cd were optimized by the CALPHAD method. For these systems, thermodynamic data, such as the activity of solutes in liquid Cd and the Gibbs energies of formation of the intermetallic compounds as well as the phase diagram data were available for the optimization. For optimization, the calculated primary results were entered into a database. Then, some ternary systems were preliminarily assessed through the use of the optimized data for the binary systems. Two extreme conditions were assumed: one condition was complete miscibility between the compounds that have the same mole ratio between solutes and Cd; the other condition was no solid solubility between the compounds. The results indicated the tendencies toward solubility and activity of actinides and REs in multielement systems.     

Safety Analysis of ITER EDA Design by GEMSAFE

General Methodology of Safety Analysis and Evaluation for Fusion Systems (GEMSAFE) was applied to the International Thermonuclear Experimental Reactor (ITER) design in the stage of Engineering Design Activities (EDA) to identify Design Basis Events (DBEs) and the related safety features, which were compared with those of the ITER design in the stage of Conceptual Design Activities (CDA). As a result, 18 DBEs for the EDA design were selected in comparison with 25 DBEs for the CDA design. DBEs related to the fuel area were categorized in higher event category than those of the CDA design due to the increase of the mobile tritium contained in some components. It was necessary to reduce the inventory of the tritium absorbed in the tokamak dust in the EDA design as well as in the CDA design. Some measures were recommended to reduce mobile tritium dissolved in the coolant in the single cooling loop due to the increase of this estimated inventory.     

Isolation of Campylobacter spp. from slaughtered cattle and swine on blood-free selective medium

The charcoal-cefazolin-sodium deoxycholate agar (CCDA) was compared with Butzler agar for selectivity of campylobacters from fecal samples. A total of 279 samples of cecal contents from 176 cattle and 103 pigs slaughtered in Saitama were examined. Fifty-five (31.3%) cattle were found to contain campylobacters by the direct plating culture on CCDA plates, compared with 29 (16.5%) on Butzler agar plates. The positive rates of pig samples on CCDA and Butzler agar were very high, being 96 (93.2%) and 86 (83.5%), respectively. After enrichment culture of 107 cattle specimens in Preston, CEM or Bu 10 broth, the isolation rate on CCDA was also higher (p < 0.01) than that on Butzler agar after enrichment in any medium. These results indicate that CCDA medium is easy to handle without blood and, as to this study shows, is superior to Butzler agar for isolation of Campylobacter species from fecal samples.     

Effect of concurrent use of ondansetron hydrochloride and dexamethasone against nausea and vomiting in lung cancer patients receiving cisplatin

We examined the efficacy of concurrent use of ondansetron hydrochloride and dexamethasone, and the effective dose of dexamethasone against nausea and vomiting in lung cancer patients receiving chemotherapy including single high dose cisplatin. The study was carried out on total of 44 courses of chemotherapy in either initial onset or recurrence of lung cancer. The patients were given 4 mg of ondansetron injection on the day of cisplatin injection (Day 1), and 4 mg/day of ondansetron tablet for Days 2 to 4. These patients were randomly allocated into 2 groups, i.e., those who, on Day 2, concomitantly received 10 mg of dexamethasone (D10 Group, 22 courses) or 20 mg (D20 Group, 22 courses), for comparing the antiemetic effects in a different concomitant dose of dexamethasone. An efficacy rate of 70% or more was achieved in each group for acute emesis on Day 1. The efficacy rate was 80% or above for emesis on Day 2 when dexamethasone was concurrently administered, and Days 3 and 4 in both groups. No significant difference was observed between the groups. A higher complete suppression rate against nausea was seen in D20 Group even though the difference from D10 Group was not significant. Furthermore, food intake rate on Day 2 was significantly better in D20 Group. However, in the cases that were graded effective or markedly effective for acute emesis on Day 1, the efficacy rate was also high in both groups through Days 2-4. It was notable that the efficacy rate of Days 2-4 was 100% in D2 Group. The high efficacy rate was shown in male patients regardless of which dose of dexamethasone was used. However, control of emesis was unfavorable in female patients on Day 1 and was still unfavorable even though dexamethasone was combined from Day 2. We considered from the above results that 10 mg/day of concurrent dexamethasone is sufficient in suppression of delayed emesis on Day 2. However, in order to improve nausea or food intake, or to suppress emesis in patients who are highly likely to show unfavorable control for Day 2 and onward, 20 mg/day should also be effective.     

Error grid analysis of noninvasive glucose monitoring via gingival crevicular fluid.

In order to realize a noninvasive blood glucose monitor, we monitored the gingival crevicular fluid (GCF). In this paper, the clinical evaluations were performed on not only normal subjects but also diabetic subjects using a GCF-glucose monitor to determine blood glucose levels. Meal load tests were carried out and the time-course changes in blood glucose level and GCF glucose level were measured continuously. A positive correlation of more than 0.9 was found between blood glucose level and GCF glucose level, necessitating the calibration of individual correlations for every subject. Finally, the performance of the GCF-glucose monitor was evaluated using Error Grid Analysis. As the results, significant information for the glucose level decision was obtained not only for normal subjects, but also for diabetic subjects.