Simple digitally programmable attenuator using FG-MOSFETs

A very simple digitally programmable attenuator using FG-MOSFETs (floating-gate MOSFETs) is presented. HSPICE simulations of the circuit demonstrate a THD of less than -32 dB and a variable gain range of -13 to -31 dB with a supply voltage of ±1.5 V, load resistance of 10 kΩ and input signal of 3 V_p-p     

A feasibility study for the removal of copper from solid ferrous scrap

A new approach for the removal of copper from solid ferrous scrap is described. With this proposal, solid ferrous scrap intermingled with copper is brought into contact with molten aluminium, which preferentially dissolves copper. After a duration of 5 to 10 minutes at a temperature of 1018 ± 5 K, steel scrap is removed from the bath, resulting in being free of copper contamination. The present method offers the advantage of far lower costs than any other processes ever suggested for copper removal.     

A Microprocessor for Speech Recognition

A new single-chip microprocessor for speech recognition, the SRP, has been developed, utilizing a multiprocessor architecture and a pipelined structure. It can recognize up to 340 isolated words or 40 connected words in real time. The SRP contains a vector distance calculator, a DP-equation calculator, and an I/O controller operating in a pipelined manner. Algorithm variations and operation parameters are user programmable, and the total size of the SRP program for a typical speech recognition system is about 700 words. The device has been fabricated with n-channel Si-gate E/D MOS technology with 2.5 μm design rules and employs 7296 three-transistor dynamic RAM cells for a total of more than 40 000 transistors.     

Analysis of electromagnetic force in wire-EDM

This paper clarifies the mechanism of how electromagnetic force applied to the wire electrode in wire electrical discharge machining (wire-EDM) is generated. This electromagnetic force is caused not only by DC component but also by AC components of the discharge current supplied to the wire. We therefore developed and used a two-dimensional finite element method (FEM) program to analyze the electromagnetic field taking into account electromagnetic induction. Assuming that trapezoidal pulse current is supplied to the wire, distributions of the current density and magnetic flux density were analyzed and changes in the electromagnetic force applied to the wire were calculated. Wire movement when the electromagnetic force alone was applied to the wire was also calculated. The calculated wire movement agreed with the measured wire movement when pulse current actually used in WEDM was supplied to the wire, clarifying the mechanism of electromagnetic force generation.     

Scandium-Doped Anatase (TiO2) Nanoparticles Directly Formed by Hydrothermal Crystallization

Anatase-type TiO₂ solid solutions doped with 0–10 mol% scandium were formed by hydrothermal crystallization under weak basic conditions above 180°C for 5 h from amorphous co-precipitates that were obtained from the aqueous precursor solutions of TiOSO₄ and Sc(NO₃)₃ using aqueous ammonia. The anatase particles were spindle-like and consisted of nanosized-crystallites (23–25 nm). The lattice parameter c ₀ of anatase and the length and width of the spindle-like anatase gradually increased when the scandium content was increased. The diffuse reflectance spectra of the as-prepared TiO₂ doped with scandium showed that the onset of absorption slightly shifted to longer wavelengths with increasing scandium content. The band gap of anatase was slightly increased by making solid solutions with scandium oxide.     

Role of Heavy Meromyosin in Heat‐Induced Gelation in Low Ionic Strength Solution Containing l‐Histidine

The gelation of myosin has a very important role in meat products. We have already shown that myosin in low ionic strength solution containing l ‐histidine forms a transparent gel after heating. To clarify the mechanism of this unique gelation, we investigated the changes in the nature of myosin subfragments during heating in solutions with low and high ionic strengths with and without l ‐histidine. The hydrophobicity of myosin and heavy meromyosin (HMM) in low ionic strength solution containing l ‐histidine was lower than in high ionic strength solution. The SH contents of myosin and HMM in low ionic strength solution containing l ‐histidine did not change during the heating process, whereas in high ionic strength solution they decreased slightly. The heat‐induced globular masses of HMM in low ionic strength solution containing l ‐histidine were smaller than those in high ionic strength solution. These findings suggested that the polymerization of HMM molecules by heating was suppressed in low ionic strength solution containing l ‐histidine, resulting in formation of the unique gel.     

Preparation and characterization of stable dispersions of carbon black and nanodiamond in culture medium for in vitro toxicity assessment

Stable dispersions of carbon black and nanodiamond in culture medium were prepared by adding a pre-mixed dispersion of commercial carbon black or nanodiamond in aqueous bovine serum albumin (BSA) solution to culture medium. Dynamic light scattering revealed that carbon black and nanodiamond dispersions prepared in both NaCl solution and culture medium were highly stable. From DLVO theory and the results of zeta potential measurements, the theoretical effect of the electrostatic interactions between adsorbed BSA molecules was found to be minimal. The asymmetric flow field-flow fractionation measurements revealed that 0.05 or 0.56 mg/mL of BSA molecules were adsorbed on 0.11 or 1.09 mg/mL of carbon black, respectively, indicating 1:2 complexation of BSA with the colloidal particles. In the case of nanodiamond, 0.06 or 0.60 mg/mL of BSA molecules were adsorbed on 0.10 or 1.05 mg/mL of nanodiamond, respectively, indicating 1:2 complexation of BSA, which is the same ratio as in the case of carbon black. The adsorbed BSA molecules served as an effective stabilizing agent for the carbon black and nanodiamond, ensuring dispersion stability for at least 1 week. The preparation of the dispersions can be easily carried out by other researchers for toxicity studies.     

Factors affecting soluble selenium removal by a selenate-reducing bacterium Bacillus sp. SF-1

High concentrations of soluble selenium, selenate and selenite, have acute and chronic toxicity toward living things. With the aim of developing a biological process for selenium removal, the effects of a variety of parameters on the reduction of soluble selenium by a Bacillus sp. strain SF-1, which is capable of reductively transforming selenate into selenite and, subsequently, into nontoxic insoluble elemental selenium, were studied. The bacterial strain could effectively reduce 20 mM of selenate to selenite and 2 mM of selenite to elemental selenium in the presence of an appropriate carbon source and in the absence of oxygen. The reduction rate of selenate to selenite was much higher than that of selenite to elemental selenium, resulting in the transient accumulation of selenite during selenate reduction. The selenate reduction rate increased with increases in the selenate concentration up to 20 mM, while the rate of selenite reduction decreased sharply at selenite concentrations of more than 2 mM. The elemental selenium transformed from selenate via selenite was found both inside and outside the cells. Bacillus sp. SF-1 was able to utilize a variety of organic acids or sugars as a carbon source in selenate reduction. Although the copresence of sulfate did not inhibit selenate reduction, it was completely inhibited by some other oxyanions, including nitrate. A model sequencing batch system using the bacterial strain was developed and exhibited good performance in the treatment of wastewater containing high concentrations of selenate.