PIV measurement and turbulence scale in turbulent combustion

We have investigated turbulent combustion by PIV (Particle Image Velocimetry) technique. Comparing with LDV data, the validity of PIV measurements has been confirmed. Particularly, the conditions of sampling number and spatial resolution have been shown to yield reliable data using PIV. Based on the velocity fields in cold flow and combustion, the interaction between flame and flow has been discussed. It was observed that the flow field is changed by combustion and the turbulence is reduced. In order to determine statistical quantities such as mean velocity and RMS of velocity fluctuation, a sampling number of 1000 is needed. Moreover, the velocity correlation coefficient was evaluated to obtain the integral length scale of the flow. For both cold flow and combustion, the PIV estimated scale is very close to that of LDV based on the assumption of Taylor's hypothesis. As a result, the spatial resolution in this study is about 6 times smaller than the integral length scale. © 2006 Wiley Periodicals, Inc. Heat Trans Asian Res, 35(7): 501–512, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.20129     

Transformation of myelofibrosis into acute myelogenous leukemia (M0) with multiple tumor emboli

AIMS: To develop a DNA based plate hybridisation assay for the detection of polymerase chain reaction (PCR) products amplified from Aspergillus fumigatus DNA; and to determine the sensitivity of this technique and compare it with Southern blotting. METHODS: A half-log dilution series of DNA extracted from A fumigatus was amplified with specific primers, one of which was 5' end labelled with biotin. PCR products were subsequently detected by agarose gel electrophoresis, Southern blotting, and binding of the products to a streptavidin coated microtitre well, followed by non-radioactive colorimetric detection. Amplification was carried out 10 times for each DNA dilution and a plot of initial DNA concentration against signal intensity was made. RESULTS: A DNA concentration of 1.5 pg could be detected by agarose gel electrophoresis and Southern blotting with a non-radioactively labelled aspergillus specific probe; 1.5 pg was detectable by streptavidin binding of the PCR products to a microtitre plate. The signal from the microtitre plate detection was proportional to the amount of DNA in the PCR reaction on a log-log scale between 100 and 1 pg of DNA. CONCLUSIONS: A DNA based plate hybridisation assay for the detection of A fumigatus PCR products is as sensitive as Southern blotting. However, results are obtained in three hours rather than the three days required for agarose gel electrophoresis, blotting, hybridisation, and detection.     

Anionic polymerization of methyl methacrylate in the presence of chromium carbonyl [Cr(CO)6]

Summary The presence of Cr(CO)₆ in nBuLi-initiated anionic polymerization of methyl methacrylates (MMA) was found to effectively enhance stereoselectivity of the polymerization in toluene at 0°C. nBuLi/Cr(CO)₆ afforded an isotactic PMMA with 86 % of mm triad, and the polymers obtained with nBuLi/Cr(CO)₆/tBuOK were rich in heterotactic structures (mr = ca. 54%). In both cases, the selectivity was improved in ca. 10% compared to those of the polymerization conducted under the similar conditions without Cr(CO)₆. Received: 20 January 2003/Revised version: 21 April 2003/Accepted: 21 April 2003 Correspondence to Eiji Ihara     

Presence of Streptococcus anginosus DNA in esophageal cancer, dysplasia of esophagus, and gastric cancer

We recently reported cloning of Streptococcus anginosus (S. anginosus) DNA fragments containing the 16S ribosomal gene from DNA samples of surgical specimens of gastric cancers. To investigate the specificity of S. anginosus infection, Southern blot analysis with S. anginosus 16S ribosomal DNA probe and PCR analysis with S. anginosus-specific primers were performed in DNA samples prepared from 15 esophageal cancers, 43 gastric cancers, 16 lung cancers, 10 cervical cancers, 14 renal cell carcinomas, 10 colorectal cancers, and 19 bladder cancers. We frequently found S. anginosus DNA sequences in DNA samples from esophageal cancer and gastric cancer tissues, as well as in those from dysplasia of the esophagus of esophageal cancer patients. No S. anginosus DNA bands were detected by Southern blot analysis on DNAs from the noncancerous portions of the esophagus or the stomach. By PCR analysis with 35 cycles, only 7% of the noncancerous portion of the esophagus was shown to contain S. anginosus sequences. No S. anginosus sequences were found in DNAs from cancers in lung, cervix, and kidney, but they were found in 1 of 10 colon cancers.     

Thermodynamics of oxygen behaviour in cobalt-nickel alloys

In this study the concentration and chemical potential of oxygen in liquid Co-Ni alloys equilibrated with cobalt-nickel aluminate spinel solid solutions and alumina have been determined at 1773, 1823 and 1873K as a function of nickel concentration. The oxygen content of the melt has been measured by suction sampling and inert gas fusion analysis. The corresponding oxygen potential has been determined with the following solid state cell: Mo, Mo+MoO₂ | (MgO)ZrO₂ | (Co, Ni) melt + AI₂O₃ + (Co, Ni)O·(1+x)Al₂O₃, Mo. The effect of nickel on the activity coefficient of oxygen in Co-Ni alloys has been determined. The results for the activity coefficient have been modelled with Wagner's interaction parameters and also the more recent exponential method of St. Pierre et al. at the three temperatures.     

Realistic image synthesis of a deformable living thing based on motion understanding

This paper describes a system that can synthesize realistic sequential images of moving goldfish based on the image understanding result of real goldfish. To analyze and synthesize images in real-time, we have constructed a hardware system that consists of 32 paralell transputers with a high-speed visual-data interface called VIT (Visual Interface for Transpputer Network). The system is very flexible and powerful for various types of image processing because it can be extended according to the required computational cost. In the understanding process, we assume that the target object, a goldfish in this case, deforms its shape pliably in 3-D space and moves only in a two-dimensional direction. A modeling, called the Bone-Structured Solid Modeler, which is suitable for representing deformable objects such as living things, plays an important role in the understanding and synthesis processes of the deformable object. Three types of constraints for motion, namely, static, dynamic, and object, are utilized to verify the estimated pose and orientation of the object. In the motion synthesis process, realistic moving images are synthesized by controlling the model employing the motion understanding result. Simulation results are presented to show the effectiveness of the system. The technology discussed in this paper is expected to play a key role in the realization of future visual human interfaces.     

Development of InxGa1−xAs-based ohmic contacts for p-type GaAs by radio-frequency sputtering

In_xGa_1−xAs-based ohmic contacts which showed excellent contact properties for n-GaAs were demonstrated to be applicable to p-GaAs ohmic contacts. These contacts, prepared by radio-frequency sputtering, provided low contact resistance (0.2 Ω-mm), excellent thermal stability, smooth surface, and good reproducibility. The contact resistances had a weak dependence on the annealing temperatures, which was desirable in a manufacturing view point. This weak temperature dependence was explained to be due to a unique Schottky barrier height at the metal/p-In_xGa_1−xAs interface which does not depend on the In concentration in the In_xGa_1−xAs layer. The present experiment showed the possibility of simultaneous preparation of ohmic contacts for both n and p-GaAs using the same contact materials.     

Reliability consideration on a compound redundant system with repair

This paper considers a standby-redundant system consisting of 2 systems, in which one is main and the other is its standby-redundant system. These systems also consist of 2 subsystems connected in series.A feature of this system is that the system has 2 switching devices connecting subsystems, in addition to one connecting main and standby systems, in order to utilize surviving subsystem. In this consideration it is assumed that all the units are repairable.We shall obtain the system reliability, the mean time to system failure, the steady state availability, and examine numerically the effects of this model to the usual one without particular switching devices.