Monitoring of human enteric viruses and coliform bacteria in waters after urban flood in Jakarta, Indonesia.

Floodwaters in Kampung Melayu village, Jakarta, Indonesia, as well as river water and consumable water (including groundwater and tap water) samples in flooded and non-flooded areas, were quantitatively analysed to assess occurrence of viruses and total coliforms and E. coli as bacterial indicators after flooding event. High numbers of enterovirus, hepatitis A virus, norovirus (G1, G2) and adenovirus were detected at high concentration in floodwaters and waters sampled from Ciliwung River which runs across metropolitan Jakarta and is used widely for agriculture and domestic purposes by poor residents. One out of three groundwater wells in the flooded area was contaminated with all viruses tested while no viruses were found in groundwater samples in non-flooded areas and tap water samples. The results revealed that human enteric viruses, especially hepatitis A virus and adenovirus, were prevalent in Jakarta, Indonesia. This study suggested that flooding posed a higher risk of viral infection to the people through contamination of drinking water sources or direct contact with floodwaters.     

Quantification and genotyping of Cryptosporidium spp. in river water by quenching probe PCR and denaturing gradient gel electrophoresis.

A new detection method was developed for the simultaneous quantification and genotyping of Cryptosporidium spp. in river water. Several modifications made to the US EPA Method 1623 enabled high and stable recovery of Cryptosporidium from 40 L of river water (geometric mean = 35%, standard deviation = 8.7%). Quenching probe PCR (QProbe PCR) was used to quantify the 18S rRNA gene of Cryptosporidium spp. This method could successfully detect single oocysts in a sample, and the lower quantitation limit was as low as 2.5 oocysts/sample. In addition, denaturing gradient gel electrophoresis (DGGE) followed by DNA sequencing was used to identify the genotypes. These methods were applied to detect Cryptosporidium spp. in the Koyama River, Japan. The positive ratio was 69% (11/16) with the maximum concentration of 59 oocysts/100 L. Seven genotypes including two novel ones were identified. These results showed that this detection method could provide valuable information on Cryptosporidium in river water, both in the concentration and in the genotypes, which is essential for the precise assessment of waterborne risk to human health.     

Changes in the thermomechanical behavior of epoxy glasses under the state of strain aging

Changes in thermomechanical behavior with structural relaxation taking place in epoxy glasses were studied. Differential scanning calorimetry measurements and thermostimulated strain recovery tests were performed for specimens deformed and then aged under fixed strain. In the course of heating, the specimens started to absorb thermal energy, whereas plastic strain was still stable. At higher temperatures, plastic strain started recovery, which was accompanied by exothermic behavior of the specimen. With an increase in the aging duration, the endothermic peak signified and moved to a higher temperature. These results indicated that the longer the aging duration was, the harder the plastic strain and strain energy were frozen in the glassy structure. This freeze‐strain phenomenon was observed for crosslinked epoxy glass, as well as polymeric glasses with linear molecular structures, aged under strain. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Low-loss athermal silica-based lattice-form interleave filter with silicone-filled grooves

We describe a low-loss athermal silica-based interleave filter with a lattice-form structure. We athermalize the filter by using a silicone-filled groove formed in each delay line and we employ a low-loss design to reduce the accumulated groove excess loss in the multiple delay lines. By using these designs, we obtained a very low groove excess loss of 0.4 dB and achieved satisfactory temperature insensitivity and optical characteristics with this filter.     

High performance 35 nm gate length CMOS with NO oxynitride gate dielectric and Ni salicide

The 35 nm gate length CMOS devices with oxynitride gate dielectric and Ni salicide have been fabricated to study the feasibility of higher performance operation. Nitrogen concentration in gate oxynitride was optimized to reduce gate current I/sub g/ and to prevent boron penetration in the pFET. The thermal budget in the middle of the line (MOL) process was reduced enough to realize shallower junction depth in the S/D extension regions and to suppress gate poly-Si depletion. Finally, the current drives of 676 /spl mu/A//spl mu/m in nFET and 272 /spl mu/A//spl mu/m in pFET at V/sub dd/=0.85 V (at I/sub off/=100 nA//spl mu/m) were achieved and they are the best values for 35 nm gate length CMOS reported to date.     

“Deactivation of copper electrode” in electrochemical reduction of CO2

Metallic Cu electrode can electrochemically reduce CO₂ to CH₄, C₂H₄ and alcohols with high yields as revealed by the present authors. Many workers reported that formation of CH₄ and C₂H₄ rapidly diminishes during electrolysis of CO₂ reduction. This paper shows that such deactivation of Cu electrode is reproduced with electrolyte solutions prepared from reagents used by these workers. Deactivated Cu electrodes recovered the electrocatalytic activity for CO₂ reduction by anodic polarization at −0.05 V versus she in agreement with the previous reports. Features of the deactivation depend greatly on the individual chemical reagents. Purification of the electrolyte solution by preelectrolysis with a Pt black electrode effectively prevents the deactivation of Cu electrode. Anode stripping voltammetry of Cu electrodes, which were deactivated during electrolysis of CO₂ reduction, showed anodic oxidation peaks at ca. −0.1 or −0.56 V versus she. The severer the deactivation of the Cu electrode was, the higher electric charge of the anodic peak was observed. It is presumed that some impurity heavy metal, originally contained in the electrolyte, is deposited on the Cu electrode during the CO₂ reduction, poisoning the electrocatalytic activity. On the basis of the potential of the anodic peaks, Fe²⁺ and Zn²⁺ are assumed to be the major contaminants, which cause the deactivation of the Cu electrode. Deliberate addition of Fe²⁺ or Zn²⁺ to the electrolyte solutions purified by preelectrolysis exactly reproduced the deactivation of a Cu electrode in CO₂ reduction. The amount of the deposited Fe or Zn on the electrode was below the monolayer coverage. Electrothermal atomic absorption spectrometry (etaas) showed that Fe originally contained in the electrolyte solution is effectively removed by the preelectrolysis of the solution. Mechanistic difference is discussed between Fe and Zn in the deterioration of the electrocatalytic property of Cu electrode in the CO₂ reduction. The concentration of the impurity substances originally contained in the chemical reagents as Fe or Zn is estimated to be far below the standard of the impurity levels guaranteed by the manufacturers. Presence of trimethylamine in the electrolyte solution also severely poisons a Cu electrode in the CO₂ reduction. It was concluded that the deactivation of Cu electrode in CO₂ reduction is not caused by adsorption of the products or the intermediates produced in CO₂ reduction.     

Separation selectivity of aqueous polyethylene glycol-based separation systems: DSC, LC and aqueous two-phase extraction studies

The distribution behavior of n-alcohols, ketones and nitroalkanes in aqueous liquid chromatography with a column packed with polyethylene glycol (PEG) gel, TSKgel Ether-250, was compared with that in aqueous two-phase systems (ATPSs) formed from PEG and Na₂SO₄ or (NH₄)₂SO₄. The plots of the distribution data obtained for the PEG gel system against those for the ATPS reveal that the separation selectivities exerted by the PEG gel system and the PEG-based ATPS are approximately the same. Differential scanning calorimetry studies on aqueous PEG solutions suggest that PEG polymer forms a hydration structure of which the composition is 50% (w/w) PEG or the hydration number per ethylene oxide is 2.4 and the separation selectivity of the PEG-water systems can be attributed to partition of solute compounds into the hydrated PEG polymer structure.     

Cryptosporidium monitoring system at a water treatment plant, based on waterborne risk assessment.

The water volume required for daily monitoring of Cryptosporidium (which can statistically ensure an annual risk of infection below 10(-4)), was assessed by evaluating the applicability of the Poisson lognormal (PLN) distribution in microbial risk assessment. PLN showed as good a fit to the observed data as to the negative binomial distribution. From the estimated PLN distributions for the source and finished water, the efficacy of the oocyst removal by the conventional water treatment process was estimated to follow log-normal distribution (median = 3.16 log10, 95% CI = 4.27-2.05 log10). The 365 consecutive negative results of daily monitoring for 180 L of finished water were found to be statistically equivalent to the annual risk of infection below 10(-4). This research also suggested the possibility of applying a qualitative detection method, such as CC-PCR, as a routine monitoring method for the quantitative risk management.     

Experimental studies of core flow fluctuations and neutron noise in a BWR

Using the instrumented fuel assemblies (IFA) installed in the Japan Power Demonstration Reactor (JPDR)-II core, fluctuations of the inlet and outlet channel flow rates were observed under both conditions of at-power operation and cold core flow circulation. The correlation analysis revealed that the flow fluctuations in any IFA channel showed almost uncorrelated cross-covariance function with other IFA channel flow. To explain the mechanism of the channel flow fluctuations, some hypothetical idea is introduced.     

The diversification of proto-cells driven by membrane permselectivity

We consider how permselectivity as a function of the membrane is related to the cell evolution with an abstract proto-cell model. We construct an autopoietic proto-cell model having primitive auto-catalytic reaction cycle inside. In this model, several primitive membrane substances are assumed to be produced from the reaction cycle and the membrane is assumed to have a permeability to specific chemical species. We show that the permselectivity of the membrane induces the diversification of the cell volume. We discuss how the diversification of the cells is related to the Darwinian evolution. This work was presented in part and awarded as Young Author Award at the 13th International Symposium on Artificial Life and Robotics, Oita, Japan, January 31–February 2, 2008