Stress distribution of coated film with a range of coated film thickness and elastic properties under a single EHL operating condition

In recent years, the techniques improving sliding performances have progressed by using coated films possessing superior tribological properties, to reduce the failures of the mechanical elements. Those techniques are often used under severe conditions such as elastohydrodynamic lubrication (EHL). In this paper, numerical three-dimensional analysis of the maximum shear stress applied into the coated film and substrate under a single EHL operating condition was performed with a range of coated film thickness and elastic properties. The strength of coated film as one of those techniques was evaluated numerically, resulting in an optimum design of coated film. As a result, coated films with a larger value of thickness and a smaller modulus of elasticity than that of substrate are preferable.     

Polymer coating method developed for carbon stripper foils

The problem of handling the fragile carbon foils (mounting on the frame, placing in the stripper changer) that easily break when self-supporting has been solved by coating carbon foils with poly-monochloro-para-xylylene. It was found that the polymer-coating method could also be used to produce carbon foils thicker than 100 μg/cm² by alternated deposition of carbon and poly-monochloro-para-xylylene layers. Carbon foil of 500 μg/cm² thick and 10 cm in diameter was produced by this method and mounted to a foil holder. Results of lifetime measurement for singly coated foils are also presented.     

黄土包气带土壤水特征曲线研究

本文主要介绍在中国辐射防护研究院野我试验场从地表到潜水ｍ深范围内４６个土芯样的水特征曲线的测量方法及测量结果。     

Experimental examination of the characteristics of bright-field scanning confocal electron microscopy images

We experimentally examined the characteristics of bright-field (BF) scanning confocal electron microscopy (SCEM) images by changing the observation conditions and comparing the images with those obtained by BF transmission electron microscopy (TEM) and BF scanning TEM (STEM) modes. The observation of 5-nm-diameter Au nanoparticles demonstrated that BF-SCEM produces object elongation of more than 2000?nm along the optical axis, as do BF-TEM and BF-STEM. We demonstrated the relationship between elongation length and geometric effects such as convergence and collection angles of a probe and the lateral size of an object; the relationship is consistent with previous theoretical prediction. Further, we observed interesting features that are seen only in the BF-SCEM images; the film contrast was strongly enhanced, compared with that of BF-STEM. In addition, a bright contrast appeared around the object position in the elongated images. Using this characteristic, we could determine the object position and structure.     

Electroelastic Response of Cylindrical Fiber with D∞ Symmetry Exposed to Local Electric Field Through Opposed Electrode Pair

To obtain practical information on the electroelastic behavior of poly-l-lactic acid microtweezers or catheters, a previously constructed analytical technique is used to obtain the electroelastic field solution of a poly-l-lactic acid cylindrical fiber exposed to a local electric field, which is applied through an opposed pair of square-sectioned electrodes. The numerical representation of the solution reveals the detailed field quantity distributions, their importance in the design of microtweezers and catheters, the overall deformation of such devices, and the effects of the electrode dimensions on the deformation.     

Nanostructured poly(3-hexylthiophene-2,5-diyl) films with tunable dimensions through self-assembly with polystyrene

Poly(3-hexylthiophene-2,5-diyl) is among the most widely used conjugated polymers for opto-electronic applications. To enhance its properties, researchers have attempted to nanostructure this polymer using various processes including breath figure arrays, nanolithography and elaborated organic synthesis. We here demonstrate a simple process to nanostructure the conjugated polymer using self-assembly with polystyrene and selective removal of one of the phases. The influence of the molecular weight of each polymer on the thin film morphology was systematically studied by atomic force microscopy. Using this approach, we observe two types of nanostructure, namely, nanoporous and nanoisland structures, of which the dimensions can be tuned by modifying the molecular weight of each polymer in the blend. This simple process introduces a cost-effective alternative to produce thin films of conjugated polymer with average nano-features from 100 nm up to 500 nm which could be used in a wide range of applications.     

Effect of morphology on shear viscosity for binary blends of polycarbonate and polystyrene

The structure and rheological properties of binary blends of polycarbonate (PC) and polystyrene (PS) were investigated using various PS samples with different molecular weights, namely PS1k (M_w = 1,000), PS53k (M_w = 53,000), and PS240k (M_w = 240,000). The blends with PS53k and PS240k show phase-separated structures, whereas the blend with PS1k is miscible. The shear viscosity decreases greatly on addition of PS53k and PS240k, especially at high shear rates, which would be a great advantage at processing operations. Because the nonlinear response occurs in the small strain region for multilayered films of PC and PS240k, the origin of the significant viscosity drop for the phase-separated system is interfacial slippage at the phase boundary.     

Transcriptional and functional responses of Escherichia coli O157:H7 growing in the lettuce rhizoplane

Lettuce and spinach are increasingly implicated in foodborne illness outbreaks due to contamination by Escherichia coli O157:H7. While this bacterium has been shown to colonize and survive on lettuce leaf surfaces, little is known about its interaction with the roots of growing lettuce plants. In these studies, a microarray analyses, mutant construction and confocal microscopy were used to gain an understanding of structure and function of bacterial genes involved in the colonization and growth of E. coli O157:H7 on lettuce roots. After three days of interaction with lettuce roots, 94 and 109 E. coli O157:H7 genes were significantly up- and down-regulated at least 1.5 fold, respectively. While genes involved in biofilm modulation (ycfR and ybiM) were significantly up-regulated, 40 of 109 (37%) of genes involved in protein synthesis were significantly repressed. E. coli O157:H7 was 2 logs less efficient in lettuce root colonization than was E. coli K12. We also unambiguously showed that a ΔycfR mutant of E. coli O157:H7 was unable to attach to or colonize lettuce roots. Taken together these results indicate that bacterial genes involved in attachment and biofilm formation are likely important for contamination of lettuce plants with Shiga toxin-producing E. coli strains.