Dielectric Depression and Dispersion in Electrophoretically Fabricated BaTiO3 Ceramic Films

Dielectric depression and dispersion were observed in BaTiO3 ceramic films fabricated by electrophoretic deposition followed by sintering. The dielectric constants were depressed down to 6800–4600 around the Curie point ( T _C ). The dielectric dispersion occurred above T _C . These dielectric properties are attributable to a surface layer formed during sintering. XRD analysis indicated that the surface layer was a hexagonal-like BaTiO₃ phase. A mixed solvent of acetylacetone and alcohol employed in the present work may have been responsible for the formation of the surface layer.     

Flow instability in capillary extrusion of plasticized poly(vinyl chloride)

Flow instability in a capillary extrusion is studied for a high molecular weight, plasticized poly(vinyl chloride) (PVC). The onset of melt fracture correlates with the long time relaxation ascribed to the generation and/or growth of PVC crystallites. An increase in the residence time in the cylinder leads to this long time relaxation and results in the melt fracture, although the apparent shear stress remains constant, irrespective of the residence time. The extrudate temperature and the species of the plasticizer also have a significant influence on the apparatus of the extruded products. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 1277–1283, 2001     

Effects of CuO Addition on Electrical Properties of 0.6BiFeO3–0.4(Bi0.5K0.5)TiO3 Lead‐Free Piezoelectric Ceramics

0.6BiFeO₃–0.4(Bi_0.5K_0.5)TiO₃ (0.6BF–0.4BKT) ceramic samples with 0.0–4.0 mol% CuO were prepared by the solid‐state reaction. The CuO addition aided the densification of the samples and slightly increased the lattice constant. The relaxor‐like defuse dielectric peak of 0.6BF–0.4BKT became sharper with increasing the CuO content. Polarization–electric field curve of the undoped 0.6BF–0.4BKT was a pinched loop in the as‐sintered state, while that was a square hysteresis with a large remanent polarization of 48 μC/cm² after the thermal quenching, demonstrating a strong domain wall pinning due to defect dipoles. We found that the CuO addition up to 2.0 mol% facilitates the polarization switching in the as‐sintered samples to increase the remanent polarization and the piezoelectric d₃₃ coefficient. The results of the structural and electrical investigations suggested that the copper ion acts as a donor in 0.6BF–0.4BKT by compensating the potassium vacancy created by the evaporation of K₂O during the calcination and sintering processes.     

Control of Oxidation State of Eu Ions in Na2O–Al2O3–SiO2 Glasses

Glasses doped with well‐controlled Eu³⁺ and Eu²⁺ ions have attracted considerable interest due to the possibility of tuning the wavelength range of the emitted light from violet to red by using their ⁵D₀→⁷F_j and 5d–4f electron transitions. Glasses were prepared to dope Eu³⁺ ions in a Na₂O–Al₂O₃–SiO₂ system, and the changes in the valence state of Eu³⁺ ions and the glass structure surrounding the Eu atoms during heating under H₂ atmosphere were investigated using fluorescence spectroscopy, X‐ray absorption fine‐structure spectroscopy, and ²⁷Al magic‐angle spinning solid‐state nuclear magnetic resonance spectroscopy. The reduction behavior of Eu³⁺ ions was dependent on the Al/Na molar ratio of the glass. For Al/Na < 1, the Al³⁺ ions formed the AlO₄ network structure accompanied by the Na⁺ ions as charge compensators; the Eu³⁺ ions occupied the interstitial positions in the SiO₄ network structure and were not reduced even under heating in H₂ gas. On the other hand, in the glasses containing Al₂O₃ with the Al/Na ratio exceeding unity, the Eu³⁺ ions commenced to be coordinated by the AlO₄ units in addition to the SiO₄ network structure. When heated in H₂ gas, H₂ gas molecules reacted with the AlO₄ units surrounding Eu³⁺ ions to form AlO₆ units terminated with OH bonds, and reduced Eu³⁺ ions to Eu²⁺ via the extracted electrons.     

Automated Synthesis of (rac)‐, (R)‐, and (S)‐[18F]Epifluorohydrin and Their Application for Developing PET Radiotracers Containing a 3‐[18F]Fluoro‐2‐hydroxypropyl Moiety

To introduce the 3‐[¹⁸F]fluoro‐2‐hydroxypropyl moiety into positron emission tomography (PET) radiotracers, we performed automated synthesis of (rac)‐, (R)‐, and (S)‐[¹⁸F]epifluorohydrin ([¹⁸F] 1 ) by nucleophilic displacement of (rac)‐, (R)‐, or (S)‐glycidyl tosylate with ¹⁸F^? and purification by distillation. The ring‐opening reaction of (R)‐ or (S)‐[¹⁸F] 1 with phenol precursors gave enantioenriched [¹⁸F]fluoroalkylated products without racemisation. We then synthesised (rac)‐, (R)‐, and (S)‐ 2‐{5‐[4‐(3‐[¹⁸F]fluoro‐2‐hydroxypropoxy)phenyl]‐2‐oxobenzo[d]oxazol‐3(2H)‐yl}‐N‐methyl‐N‐phenylacetamide ([¹⁸F] 6 ) as novel radiotracers for the PET imaging of translocator protein (18 kDa) and showed that (R)‐ and (S)‐[¹⁸F] 6 had different radioactivity uptake in mouse bone and liver. Thus, (rac)‐, (R)‐, and (S)‐[¹⁸F] 1 are effective radiolabelling reagents and can be used to develop PET radiotracers by examining the effects of chirality on their in vitro binding affinities and in vivo behaviour.     

Investigation of controllable self-organized honeycomb micro-structure

Patterned micro- and nanostructure are of great significance in industrial applications such as electronics, optics and sensors. Microporous honeycomb film of polyhpenylene oxide (PPO) was fabricated as the template via evaporation of solution in carbon bisulfide under humid ambience. The effect of fabrication conditions on patterned microstructure was investigated by self-organization experiments to build quantitative relationship between ambient conditions such as humidity, concentration and honeycomb microstructure (diameter and height), through which the honeycomb film formation can be controlled to self-organize desirable PPO patterned microstructure. Especially, the height of honeycomb was derived from the diameter of honeycomb, and its validity was clarified by morphological comparison between PPO template and PDMS molded structure. Moreover, soft mold experiments were conducted to demonstrate its high efficiency and excellence as an alternative to construct regular micro-pattern.     

Preparation of bismuth nanowire encased in quartz template for Hall measurements using focused ion beam processing

ABSTRACT: Forming electrodes on opposite sides of an individual bismuth nanowire was attempted to prepare for Hall measurements. Although a 1-mm-long bismuth nanowire which is completely covered with a quartz template has been successfully fabricated to prevent oxidation, it is very difficult to attach Hall electrodes on the opposite sides of the nanowire due to the quartz covering. One side of the cylindrical quartz template was removed by polishing without exposure of the nanowire to the atmosphere; the thickness between the polished template surface and the nanowire was estimated to be several micrometers. Focused ion beam processing was successfully employed to expose both surfaces of the nanowire under high vacuum by removing part of the quartz template. A carbon thin film was then deposited in situ on the wire surface to fabricate an electrical contact on the bismuth nanowire sample. Furthermore, the energy dispersive X-ray analysis was performed to the area processed by focused ion beam, and the bismuth component of the nanowire was successfully detected. It was confirmed that the focused ion beam processing was applicable to attach electrodes to bismuth nanowire for Hall measurement.     

Fine structure of tooth enamel in the yellowing human teeth: SEM and HRTEM studies

Objective : The aim of this study was to clarify an influence of the fine structure of human tooth enamel to the yellowing teeth. Materials and methods : Sound maxillary first premolars of 15–50‐year‐old females that were extracted for the orthodontic treatment were used as the test samples. The tooth enamel sections of these teeth that prepared by ion polishing were observed by scanning electron microscopy (SEM). Furthermore, the fine structure of substance filling the inter‐rod spaces was analyzed by high resolution transmission electron microscopy (HRTEM). Results : In white tooth, the inter‐rod spaces were observed at the width of about 0.1 μm, while in yellow tooth, the inter‐rod spaces were not clearly observed by SEM. HRTEM observations revealed for the first time that the inter‐rod spaces were filled with fine particles of poorly crystallized hydroxyapatite in the yellow tooth. In yellow tooth, it was considered that the color of the inner dentin was recognized due to the decrease of light scattering by filling the tooth enamel inter‐rod spaces. The generation of particles in the tooth enamel inter‐rod spaces was considered to be caused by the long‐time progression of calcification. Conclusions : These results suggested that the change in fine structure, filling in inter‐rod spaces of tooth enamel, was related to progression of calcification in the inter‐rod spaces with advancing age and one of the factors of yellowness of human tooth. Microsc. Res. Tech. 79:14–22, 2016. © 2015 Wiley Periodicals, Inc.     

Effects of Some Light Alloying Elements on the Oxidation Behavior of Fe and Ni-Cr Based Alloys During Air Plasma Spraying

The oxidation behavior of iron binary powders with addition of Si (1, 4 wt.%) and B (1, 3 wt.%) and that of a Ni-Cr based alloy powder with Si (4.3 wt.%), B (3.0 wt.%), and C (0.8 wt.%) additions during atmosphere plasma spray (APS) have been investigated. Analysis of the chemical composition and phases of oxides in the captured in-flight particles and deposited coatings was carried out. The results show that the addition of Si and B to iron effectively reduced the oxygen contents in the coatings, especially during the in-flight period at higher particles temperature. Ni-Cr based alloy powder with Si, B, and C additions reduced the oxidation of the base alloys significantly. Preferential oxidation and subsequent vaporization of Si, B, and C from the surface of the sprayed particles are believed to play a major role in controlling oxidation in the APS process.