Biocomposites Made from Short Abaca Fiber and Biodegradable Polyesters

Natural fiber‐reinforced biodegradable polyester composites were prepared from biodegradable polyesters and surface‐untreated or ‐treated abaca fibers (length ca. 5 mm) by melt mixing and subsequent injection molding. Poly(butylene succinate)(PBS), polyestercarbonate (PEC)/poly(lactic acid)(PLA) blend, and PLA were used as biodegradable polyesters. Esterifications using acetic anhydride and butyric anhydride, alkali treatment, and cyanoethylation were performed as surface treatments on the fiber. The flexural moduli of all the fiber‐reinforced composites increased with fiber content. The effect of the surface treatment on the flexural modulus of the fiber‐reinforced composites was not so pronounced. The flexural strength of PBS composites increased with fiber content, and esterification of the fiber by butyric anhydride gave the best result. For the PEC/PLA composites, flexural strength increased slightly with increased fiber content (0–20 wt.‐%) in the case of using untreated fiber, while it increased considerably in the case of using the fiber esterified by butyric anhydride. For the PLA composite, flexural strength did not increase with the fiber reinforcement. The result of soil‐burial tests showed that the composites using untreated fiber have a higher weight loss than both the neat resin and the composites made using acetylated fiber.

Flexural modulus of PBS composites as a function of fiber content.     

Composite sheets with biodegradable polymers and paper,the effect of paper strengthening agents on strength enhancement,and an evaluation of biodegradability

Composite sheets composed of biodegradable polymers (BP) and paper were prepared, and their physical and biodegradable properties were investigated. The paper sheets were soaked in BP emulsions and cured at 100°C for 20 min. The wet strength of composite sheets with the same basis weight increased significantly with increasing BP content, although dry strength increased only moderately. A 0.5% addition of a common wet paper‐strengthening agent, poly(amidoamine‐epichlorohydrin) (PAE) resin, enhanced the wet strength, which reached 9.3 MPa, of composite sheets consisting of a BP : paper ratio of 20 : 80. Further enhancement was achieved by the addition of polyvinylamines (PVAm). The wet tensile strength of composite sheets consisting of BP and paper (20 : 80) increased by 27% with the addition of 0.2% PVAm and 0.5% PAE, whereas it was enhanced by only 3–4% with the addition of 0.7% PAE. The biodegradability of the composite sheets was somewhat retarded by the addition of PAE and PVAm. However, a 90% weight loss was observed 60 days after placing composite sheet samples in soil. A similar weight loss was observed after 45 days for composites without additives and after 30 days for base paper alone. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 861–866, 2005     

Treatment of Chronic Kidney Disease with Extracellular Vesicles from Mesenchymal Stem Cells and CD133+ Expanded Cells: A Comparative Preclinical Analysis

Chronic kidney disease (CKD) is characterized by structural abnormalities and the progressive loss of kidney function. Extracellular vesicles (EVs) from human umbilical cord tissue (hUCT)-derived mesenchymal stem cells (MSCs) and expanded human umbilical cord blood (hUCB)-derived CD133⁺ cells (eCD133⁺) maintain the characteristics of the parent cells, providing a new form of cell-free treatment. We evaluated the effects of EVs from hUCT-derived MSCs and hUCB-derived CD133⁺ cells on rats with CDK induced by an adenine-enriched diet. EVs were isolated by ultracentrifugation and characterized by nanoparticle tracking analysis (NTA) and electron microscopy. The animals were randomized and divided into the MSC-EV group, eEPC-EV group and control group. Infusions occurred on the seventh and 14th days after CKD induction. Evaluations of kidney function were carried out by biochemical and histological analyses. Intense labeling of the α-SMA protein was observed when comparing the control with MSC-EVs. In both groups treated with EVs, a significant increase in serum albumin was observed, and the increase in cystatin C was inhibited. The results indicated improvements in renal function in CKD, demonstrating the therapeutic potential of EVs derived from MSCs and eCD133⁺ cells and suggesting the possibility that in the future, more than one type of EV will be used concurrently.     

Random mutagenesis improves the low-temperature activity of the tetrameric 3-isopropylmalate dehydrogenase from the hyperthermophile Sulfolobus tokodaii

In general, the enzymes of thermophilic organisms are more resistant to thermal denaturation than are those of mesophilic or psychrophilic organisms. Further, as is true for their mesophilic and psychrophilic counterparts, the activities of thermophilic enzymes are smaller at temperatures that are less than the optimal temperature. In an effort to characterize the properties that would improve its activity at temperatures less than the optimal, we subjected the thermostable Sulfolobus tokodaii (S. tokodaii) 3-isopropylmalate dehydrogenase to two rounds of random mutagenesis and selected for improved low-temperature activity using an in vivo recombinant Escherichia coli system. Five dehydrogenase mutants were purified and their catalytic properties and thermostabilities characterized. The mutations favorably affect the K(m) values for NAD (nicotinamide adenine dinucleotide) and/or the k(cat) values. The results of thermal stability measurements show that, although the mutations somewhat decrease the stability of the enzyme, the mutants are still very resistant to heat. The locations and properties of the mutations found for the S. tokodaii enzyme are compared with those found for the previously isolated low-temperature adapted mutants of the homologous Thermus thermophilus enzyme. However, there are few, if any, common properties that enhance the low-temperature activities of both enzymes; therefore, there may be many ways to improve the low-temperature catalytic activity of a thermostable enzyme.     

Novel synthesis of poly(methyl methacrylate) brush encapsulated silica particles

Silica (SiO₂)‐crosslinked polystyrene (PS) particles possessing photofunctional N,N‐diethyldithiocarbamate (DC) groups on their surface were prepared by the free‐radical emulsion copolymerization of a mixture of SiO₂ (diameter = 20 nm), styrene, divinyl benzene, 4‐vinylbenzyl N,N‐diethyldithiocarbamate (VBDC), and 2‐hydroxyethyl methacrylate with a radical initiator under UV irradiation. In this copolymerization, the inimer VBDC had the formation of a hyperbranched structure by a living radical mechanism. The particle sizes of such core–shell structures [number‐average particle diameter (D_n) = 35–40 nm] were controlled by the variation of the feed amounts of the monomers and surfactant, or emulsion system. The size distributions were relatively narrow (weight‐average particle diameter/D_n ≈ 1.05). These particles had DC groups on their surface. Subsequently, poly(methyl methacrylate) brush encapsulated SiO₂ particles were synthesized by the grafting from a photoinduced atom transfer radical polymerization approach of methyl methacrylate initiated by SiO₂‐crosslinked PS particles as a macroinitiator. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Effect of Polymer Dispersant Structure on Electrosteric Interaction and Dense Alumina Suspension Behavior

The present paper reports on research on the effect of molecular structure of polymer dispersants on the relationship between the electrosteric interaction of dispersants on solid surfaces and the viscosity of suspensions. Ammonium polyacrylate with different hydrophilic to hydrophobic ratios ( m:n ) was prepared and added to dense Al₂O₃ suspensions (40 vol%). The steric interactions and adsorbed structures of dispersants on Al₂O₃ powders were examined under an atomic force microscope (AFM). An optimum hydrophilic to hydrophobic group ratio, which was obtained from the maximum repulsive force and the minimum viscosity of suspension, was determined at m :n = 3:7. The changing mechanism of the adsorbed structure and the steric interaction of dispersants and the suspension viscosity by the hydrophilic to hydrophobic molecular ratio were discussed by comparing the experimental force curve and DLVO theory.     

Specialist Leaf Beetle Larvae Use Volatiles from Willow Leaves Infested by Conspecifics for Reaggregation in a Tree

Young, gregariously living larvae of the willow leaf beetles Plagiodera versicolora are known to exhibit characteristic aggregation-dispersion-reaggregation behavior and local fidelity to a host tree. In this study, we investigated whether plant volatiles induced by feeding P. versicolora larvae were involved in the reaggregation behavior. Under laboratory conditions, we conducted dual-choice bioassays and found that the first and second instars discriminated between volatiles from leaves infested by larvae and volatiles from uninfested leaves. The discriminative behavior was dependent on both the time leaves were infested and the age of discriminating larvae. First and second instars preferred odor from 1-d-infested leaves to odor from uninfested leaves, whereas third instars (solitary stage) did not discriminate between these volatile blends. Odor from 2-d-infested leaves was preferred to odor from 1-d-infested leaves by first instars, whereas odor from leaves infested for 3 d was not attractive to these very young larvae. Neither was odor of leaves infested for 1 d and then left uninfested for 1 or 2 d attractive to young larvae. The data suggest that the first and second instars use volatiles from a leaf newly infested by conspecific larvae as one of the reaggregation cues. We detected several herbivore-induced compounds in the headspace of the attractive leaves. Among those, a mixture of synthetic (E)-β-ocimene, (Z)-β-ocimene, allo-ocimene, and linalool was found to attract the larvae.     

Methods for determination of milt protein and epsilon-polylysine in food additive preparations and processed foods by capillary zone electrophoresis

A simple and rapid method using capillary zone electrophoresis (CZE) for the determination of milt protein (MP), which contains mainly protamine, and polylysine (PL) in food additive preparations and processed foods was developed. CZE separation was performed on poly(vinyl alcohol)-coated capillaries at a column temperature of 20 degrees C with 120 mmol/L phosphate buffer (pH 2.5) as the running buffer. The influence of various components in food additive preparations on CZE analysis of MP and PL was examined. Egg white lysozyme, glycine, sodium acetate, glycerol, fumaric acid, calcium carbonate, dextrin, emulsifiers and sodium polyphosphate and pyrophosphate had no effect. No peak of protamine was detected in preparations containing metaphosphate. The analysis method for processed foods was composed of extraction with 4% formic acid, precipitation of macromolecular compounds with ethanol, concentration in a water bath and determination by CZE. The average recoveries were 108.4% for protamine sulfate (PS) in red bean sticky rice, and 81.3% for PL in white rice, 118% in egg sandwiches, and 115% in shiraae. The limits of detection of PS in red bean sticky rice and PL in white rice were both 50 ppm.