Use of the nuclear microprobe at the University of Arizona for the study of heavy metal deposition in rabbit renal tissue

Industrial wastes consigned to disposal sites frequently contain substantial amounts of heavy metals. We have successfully applied proton induced X-ray emission analysis (PIXE) in the conduct of heavy metal (Hg, Cd, Cr, As) toxicity studies using precision cut rabbit renal cortical slices. The large beam diameter (4000 μm) of the proton macroprobe at The University of Arizona Ion Beam Analysis facility allowed an overall concentration of the metal(s) of interest in the samples to be determined, but lacked the ability to resolve point concentrations in the tissue. The ability to locate these areas has now been made available to us with the addition of a rastering microprobe (μ-PIXE) to the facility. Studies now being conducted in our laboratory using this micro-technique include analysis of renal tissue taken from rabbits injected intraperitoneally with HgCl₂, K₂Cr₂O₇, and NaAsO₂. The small beam size (3 μm) and the ability to raster this beam over areas of up to 125 μm × 125 μm has allowed regional mapping of endogenous and non-endogenous metal concentrations and revealed trends in heavy metal deposition in in vivo treated renal tissue, significantly increasing the amount of information obtained from these animal studies using PIXE alone. The combination of small beam size, high resolution, and multi-element detection makes μ-PIXE a powerful tool for investigating the impact of non-endogenous metals on the kidney.     

Defect formation in epitaxial oxide dielectric layers due to substrate surface relief

Defects were characterized in epitaxial (001) CeO₂ films deposited and planarizedin situ on patterned (001) LaAlO₃ substrates by ion beam assisted deposition (IBAD). A hill and valley structure with steps running parallel to the [100] LaAlO₃ axis was produced on the surface of the substrate by photolithography and ion beam etching prior to film deposition. A conformai epitaxial CeO₂ layer of ∼ 100 nm thickness was deposited on the heated substrate by e-beam evaporation. Lattice-matching between the e-beam film and the substrate was of the type: (001) CeO₂∥(001) LaAlO₃ and [110] CeO₂∥[100] LaAlO₃. Evaporative deposition of additional film onto the conformai layer was accompanied by bombardment with a 500 eV argon/oxygen ion beam to promotein situ planarization. Extreme lattice misfit for the orientation (001) CeO₂∥(001)LaAlO₃ and [001] CeO₂∥[001] LaAlO₃ caused formation of dislocations in the e-beam CeO₂ film in the vicinity of individual ledges in the substrate surface. Coherence of the CeO₂ film was locally lost in the step regions of the hill and valley structure. The large patterned steps, which are composed of numerous adjacent ledges in the LaAlO₃ surface, caused nucleation of CeO₂ with a tilt misalignment of up to ∼5‡ about the substrate [100]. Nucleation and growth of nonepitaxial CeO₂ crystallites was observed along the step regions of the film during the IBAD portion of deposition. Defect formation in the e-beam ceria layer due to substrate surface relief indicates that “lattice engineering≓ of multilayer epitaxial structures may not be possible when nonplanar surfaces are created during device fabrication. The IBAD CeO₂ layer was more defective than the conformai layer deposited without the impinging ion beam, even in the portions of the film where epitaxy was maintained throughout both layers.     

Local‐scale Benefits of River Connectivity Restoration Planning Beyond Jurisdictional Boundaries

Conservation planning aims to optimize outcomes for select species or ecosystems by directing resources toward high‐return sites. The possibility that local benefits might be increased by directing resources beyond the focal area is rarely considered. We present a case study of restoring river connectivity for migratory fish of the Great Lakes Basin by removing dams and road crossings within municipal jurisdictions versus their broader watersheds. We found that greater river connectivity could often be achieved by considering both intra‐jurisdictional and extra‐jurisdictional barriers. Focusing on jurisdictional barriers alone generally forfeited <20% (median = 0%) of habitat gains for those who value solely habitat gains within the jurisdiction, but >75% (median = 100%) for planners who value larger‐scale habitat gains. Similarly, cost savings tended to be between ?50% and +50%, but in some cases were very negative. Our study underscores the local‐scale benefits of broadening restoration investments, especially for decision makers of the Great Lakes Basin and contributes to a discussion of appropriate and efficient scales of conservation planning. Copyright © 2017 John Wiley & Sons, Ltd.     

Void formation in a filled SBR rubber determined by small-angle X-ray scattering

Two commercial styrene-butadiene (SBR) latexes were used to prepare a model filled material consisting of glassy SBR filler particles about 1000 Å in diameter embedded in a rubbery SBR matrix crosslinked by γ-radiation. When transparent specimens of this material were extended, voiding occurred, as evidenced by stress whitening and greatly enhanced X-ray scattering intensity. More voids were formed at higher rates of extension, but voids disappeared when specimens were relaxed. The effects of filler content and cure time of the matrix on the size and number of voids formed were determined by low-angle X-ray scattering for a constant extension rate and a constant extension ratio λ = 1.6. The number of voids measured by X-ray scattering intensity decreased rapidly with time over the 3-h period of measurement. The number of voids remaining 1 h after extension increased about 40 times as filler content was increased from 15% to 50%. Increasing the cure time from 24 to 96 h increased the number of voids about four times. In contrast, the radius of gyration of the voids formed (250–350 Å) did not depend strongly on time, nor did it depend strongly on the filler content or the cure time of the matrix. Stress relaxation measurements made under the same conditions as X-ray scattering measurements showed effects typical of filled materials. However, the relaxation of stress (which followed a power law decay) was much slower than the decay of the number of voids as measured by X-ray scattering intensity.     

Engineering Analysis and Design with ALE-VMS and Space–Time Methods

Flow problems with moving boundaries and interfaces include fluid–structure interaction (FSI) and a number of other classes of problems, have an important place in engineering analysis and design, and offer some formidable computational challenges. Bringing solution and analysis to them motivated the Deforming-Spatial-Domain/Stabilized Space–Time (DSD/SST) method and also the variational multiscale version of the Arbitrary Lagrangian–Eulerian method (ALE-VMS). Since their inception, these two methods and their improved versions have been applied to a diverse set of challenging problems with a common core computational technology need. The classes of problems solved include free-surface and two-fluid flows, fluid–object and fluid–particle interaction, FSI, and flows with solid surfaces in fast, linear or rotational relative motion. Some of the most challenging FSI problems, including parachute FSI, wind-turbine FSI and arterial FSI, are being solved and analyzed with the DSD/SST and ALE-VMS methods as core technologies. Better accuracy and improved turbulence modeling were brought with the recently-introduced VMS version of the DSD/SST method, which is called DSD/SST-VMST (also ST-VMS). In specific classes of problems, such as parachute FSI, arterial FSI, ship hydrodynamics, fluid–object interaction, aerodynamics of flapping wings, and wind-turbine aerodynamics and FSI, the scope and accuracy of the FSI modeling were increased with the special ALE-VMS and ST FSI techniques targeting each of those classes of problems. This article provides an overview of the core ALE-VMS and ST FSI techniques, their recent versions, and the special ALE-VMS and ST FSI techniques. It also provides examples of challenging problems solved and analyzed in parachute FSI, arterial FSI, ship hydrodynamics, aerodynamics of flapping wings, wind-turbine aerodynamics, and bridge-deck aerodynamics and vortex-induced vibrations.     

Atomic force microscopy study of biaxially oriented polypropylene films

Atomic force microscopy (AFM) uses a very sharp pointed mechanical probe to collect real-space morphological information of solid surfaces. AFM was used in this study to image the surface morphology of a biaxially oriented polypropylene film. The polymer film is characterized by a nanometer-scale, fiberlike network structure, which reflects the drawing process used during the fabrication of the film. AFM was used to study polymer-surface treatment to improve wettability by exposing the polymer to ozone with or without ultraviolet (UV) irradiation. Surface-morphology changes observed by AFM are the result of the surface oxidation induced by the treatment. Due to the topographic features of the polymer film, the fiberlike structure has been used to check the performance of the AFM tip. An AFM image is a mixture of the surface morphology and the shape of the AFM tip. Therefore, it is important to check the performance of a tip to ensure that the AFM image collected reflects the true surface features of the sample, rather than contamination on the AFM tip.     

Desired concentration-dependent ion exchange for micro-optic lenses

The required concentration-dependent diffusion coefficients for both ideal one-dimensional and ideal radial gradient-index profiles are determined. The modified quasi-chemical diffusion model is used to relate the diffusion coefficient to optimum glass composition. Adding aluminum to sodium silicate glasses facilitates the approach to the desired concentration dependence of the diffusion coefficient for silver-sodium ion exchange. A parabolic one-dimensional index profile is fabricated in one of the glasses. It deviates from ideal values by less than 2%.     

Fringe—A Java-based finite fringe analysis package

A package for analysing two-dimensional finite fringe interferograms is described. Through a combination of automatic and interactive routines, an interferogram can be processed to extract the phase shift imparted on the recording light by a transparent object. The package consists of routines to condition and pad the original image for Fourier transform analysis, to filter the image and obtain the phase, to unwrap the phase, and to remove the background phase ramp. A sample image recorded using holographic interferometry is successfully analysed.Program summaryProgram title: FRINGECatalogue identifier: AEMM_v1_0Program summary URL: http://cpc.cs.qub.ac.uk/summaries/AEMM_v1_0.htmlProgram obtainable from: CPC Program Library, Queen’s University, Belfast, N. IrelandLicensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.htmlNo. of lines in distributed program, including test data, etc.: 134006No. of bytes in distributed program, including test data, etc.: 4029801Distribution format: tar.gzProgramming language: Java.Computer: Personal Computers.Operating system: Mac OS X, Windows XP, Linux and any other system that can run Java Jar files.RAM: 1GB recommendedClassification: 18.Nature of problem: A standalone multi-platform program to perform analysis of finite fringe interferograms.Solution method: Fourier filtering approach with phase unwrapping and background subtraction.Restrictions: Designed to analyse square images.Running time: Interactive processing takes several minutes. Minimal cpu time.