Wide range humidity sensors printed on biocomposite films of cellulose nanofibril and poly(ethylene glycol)

Cellulose nanofibril (CNF) films were prepared from side streams generated by the sugarcane industry, that is, bagasse. Two fractionation processes were utilized for comparison purposes: (1) soda and (2) hot water and soda pretreatments. 2,2,6,6-Tetramethylpiperidinyl-1-oxyl-mediated oxidation was applied to facilitate the nanofibrillation of the bagasse fibers. Poly(ethylene glycol) (PEG) was chosen as plasticizer to improve the ductility of CNF films. The neat CNF and biocomposite films (CNF and 40% PEG) were used for fabrication of self-standing humidity sensors. CNF-based humidity sensors exhibited high change of impedance, within four orders of magnitude, in response to relative humidity (RH) from 20 to 90%. The use of plasticizer had an impact on sensor kinetics. While the biocomposite film sensors showed slightly longer response time, the recovery time of these plasticized sensors was two times shorter in comparison to sensors without PEG. This study demonstrated that agroindustrial side streams can form the basis for high-end applications such as humidity sensors, with potential for, for example, packaging and wound dressing applications. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47920.     

Improvement of Aglycone π-Stacking Yields Nanomolar to Sub-nanomolar FimH Antagonists

Antimicrobial resistance has become a serious concern for the treatment of urinary tract infections. In this context, an anti-adhesive approach targeting FimH, a bacterial lectin enabling the attachment of E. coli to host cells, has attracted considerable interest. FimH can adopt a low/medium-affinity state in the absence and a high-affinity state in the presence of shear forces. Until recently, mostly the high-affinity state has been investigated, despite the fact that a therapeutic antagonist should bind predominantly to the low-affinity state. In this communication, we demonstrate that fluorination of biphenyl α-d -mannosides leads to compounds with perfect π–π stacking interactions with the tyrosine gate of FimH, yielding low nanomolar to sub-nanomolar K_D values for the low- and high-affinity states, respectively. The face-to-face alignment of the perfluorinated biphenyl group of FimH ligands and Tyr48 was confirmed by crystal structures as well as ¹H,¹⁵N-HSQC NMR analysis. Finally, fluorination improves pharmacokinetic parameters predictive for oral availability.     

Development of green extraction process to produce antioxidant-rich extracts from purple coneflower

The present study was conducted to develop subcritical water extraction (SWE) of Echinacea purpurea flowers. The influence of temperature and extraction time on quality of extracts considering total phenols content, total flavonoids content, antioxidant capacity and extraction yield, was determined. Optimized extraction parameters for maximised investigated responses were as follows: 147.56 °C and 8.43 min. The experimental values agreed with the values predicted, thus indicating the adequacy of central composite experimental design for modelling the SWE of bioactive compounds from E. purpurea. Results of the study also highlighted the potential application of E. purpurea subcritical water extracts as a source of valuable bioactive compounds.     

Mapping local microstructure and mechanical performance around carbon nanotube grafted silica fibres: methodologies for hierarchical composites

The introduction of carbon nanotubes (CNTs) modifies bulk polymer properties, depending on intrinsic quality, dispersion, alignment, interfacial chemistry and mechanical properties of the nanofiller. These effects can be exploited to enhance the matrices of conventional microscale fibre-reinforced polymer composites, by using primary reinforcing fibres grafted with CNTs. This paper presents a methodology that combines atomic force microscopy, polarised Raman spectroscopy, and nanoindentation techniques, to study the distribution, alignment and orientation of CNTs in the vicinity of epoxy-embedded micrometre-scale silica fibres, as well as, the resulting local mechanical properties of the matrix. Raman maps of key features in the CNT spectra clearly show the CNT distribution and orientation, including a 'parted' morphology associated with long grafted CNTs. The hardness and indentation modulus of the epoxy matrix were improved locally by 28% and 24%, respectively, due to the reinforcing effects of CNTs. Moreover, a slower stress relaxation was observed in the epoxy region containing CNTs, which may be due to restricted molecular mobility of the matrix. The proposed methodology is likely to be relevant to further studies of nanocomposites and hierarchical composites.     

Deodorization optimization of Camelina sativa oil: Oxidative and sensory studies

Camelina sativa oil (CO) is characterized by a high content (up to 40 wt %) of essential α‐linolenic acid and characteristic odour and flavour. Deodorization of highly unsaturated oils requires great attention as the refining process involves thermal treatment which affects oil integrity. In the present study RSM and principal component analysis (PCA) were used to optimize bench‐scale deodorization of CO. Mathematical models were generated through multiple regressions with backward elimination, describing the effects of process parameters (temperature, steam flow, time) on oil quality indicators [peroxide value (PV), p‐anisidine value (p‐AV), γ‐tocopherol (γ‐T) and oxidative stability (OS)]. Additionally, sensory evaluation was performed. RSM analysis showed a significant effect of deodorization temperature and to a lesser extent, deodorization steam flow and time on removal of oxidative compounds, flavour and odour. PCA of chemical and sensory results showed that deodorization temperature affected the sensory properties in the samples. The best conditions for removing undesirable flavour and odour were achieved by using a deodorization temperature of 195–210°C.     

Sorption properties of wood impregnated with aqueous solution of boric acid and montan wax emulsion

Nonbiocidal techniques for wood protection have become more and more important in the last few years. One of the possible treatments to enhance wood durability is use of water repellents. In this research, the influence of one of the possible water repellents, the montan wax emulsion, on the moisturizing and the sorption characteristics of impregnated wood was investigated. To achieve a better protection against wood decay fungi, wood was impregnated with montan wax emulsion enriched with boric acid. The equilibrium moisture content (MC) was monitored during the adsorption and the desorption processes at five levels of relative air humidity (RH₁ = 20%, RH₂ = 33%, RH₃ = 65%, RH₄ = 88%, and RH₅ = 98%). Water repellence efficiency was monitored in the chamber with high RH (87%) and during dipping in the water. Impregnated samples were also exposed outdoors in a covered position for 5 months to determine MC changes according to changes in outdoor humidity and temperature. The results showed that the sorption properties of the impregnated wood are strongly related to retention of preservative solutions after impregnation and its composition. Montan wax reduced equilibrium MC of the impregnated wood up to 25% (relatively), whereas specimens impregnated with combination of montan wax and boric acid resulted in decreased MC in some cases and in increased MC in some cases. The Guggenheim–Andersen–deBoer model of sorption isotherms was fitted to experimental data to explain the sorption mechanisms. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

CO2 laser-assisted preparation of transparent Eu2Ti2O7 thin films

We present a laser-assisted preparation of transparent europium-titanate Eu₂Ti₂O₇ thin films with tailored structural and optical properties. We have evaluated the effects of the irradiation time on the structural and the optical properties of the films. This approach allows the preparation of nanocrystalline crack-free films and micro patterns. The amorphous thin films were prepared by a sol-gel method. The films were annealed by a CO₂ laser beam for various time intervals. The laser irradiation induced a crystallization process that resulted in the formation of Eu₂Ti₂O₇ nanocrystals. The nanocrystals regularly grew with increasing irradiation time reaching the size from 25?nm to 45?nm. A film of a thickness 480?nm exhibited an optical transmission of 91.9% that is close to the maximal theoretical limit. The film's refractive index at 632?nm was 2.26. A micrometric pattern was prepared by a direct laser writing followed by a wet chemical etching. Feasibility of the demonstrated approach, together with the high film's quality, and europium-titanate chemical resistivity open up many opportunities for advanced applications. The approach can be used for a preparation of protective coatings and integrated photonic devices such as planar optical waveguides and couplers.     

Synthesis and properties of YBa2Cu3O7-δ – Y2Ba4CuWO10.8 superconducting composites

YBa₂Cu₃O_7-δ (YBCO) is a well-known high-temperature superconductor. However, its critical current density and thus maximum trapped magnetic field can be improved significantly by introducing the secondary phases (artificial pinning centers). In this contribution, we successfully prepared YBCO single-grain bulks with Y₂Ba₄CuWO_10.8 phase serving as a source of pinning centers. This phase was prepared by solid-state reaction and further refined by milling. In the next step single-grain YBCO bulks with homogeneously distributed Y₂Ba₄CuWO_10.8 were prepared by top-seeded melt growth. Precursors as well as the final product were characterized by XRD, SEM and EDS. The phase composition of YBCO bulks containing Y₂Ba₄CuWO_10.8 was analyzed using Rietveld analysis. Thermal stability of YBCO bulk was studied by STA. Furthermore, PPMS was used to study electrical resistivity and critical current density. Bulk superconducting properties such as levitation force and trapped field ability were also measured.     

A new thermodynamic function for phase‐splitting at constant temperature,moles, and volume

We introduce a new thermodynamic function for phase‐split computations at constant temperature, moles, and volume. The new volume function F_i introduced in this work is a natural choice under these conditions. Phase equilibrium conditions in terms of the volume functions are derived using the Helmholtz free energy. We present a numerical algorithm to investigate two‐phase equilibrium based on the fixed point iteration and Newton method. We demonstrate usefulness and powerful features of the new thermodynamic function for a number of examples in two‐phase equilibrium calculations. © 2010 American Institute of Chemical Engineers AIChE J, 2011     

Self‐assembled structures in polystyrene‐block‐polyisoprene‐blend‐polystyrene and polystyrene‐block‐poly(methyl methacrylate)‐blend‐polystyrene or ‐blend‐poly(methyl methacrylate) in the strong segregation regime

This study deals with the investigation of microphase‐separated morphology and phase behaviour in blends of polystyrene‐block‐polyisoprene with homopolystyrene and blends of polystyrene‐block‐poly(methyl methacrylate) with homopoly(methyl methacrylate) or homopolystyrene in the strong segregation regime using small‐angle X‐ray scattering and transmission electron microscopy as a function of composition, molecular weight of homopolymers, r_M and temperature. Parameter r_M = M_H/M_C (where M_H is the molecular weight of homopolymer and M_C that of the corresponding block copolymer) was selected to encompass behaviour of the chains denoted as a ‘wet brush’ (i.e. r_M < 1). The relative domain spacing D/D_o increases in the regime 0 < r_M?1 with increasing concentration of homopolymer w_P and increasing r_M but depends on the specific implemented morphology. We tested a new approximate D/D_o versus w_P relation in the strong segregation regime using block copolymers of high molecular weights. It is shown that the parameters r_M and χ^3/2N determine the slope of the D/D_o versus w_P relation in the strong segregation regime and the new approximation generally matches the experimental data better than the approximations used so far. Copyright © 2010 Society of Chemical Industry