SISAK快速化学分离装置的建立

SISAK(Short-lived Isotopes Studies by the AKUFVE technique)技术是目前使用最广泛的快速化学分离方法之一,主要应用在短寿命核素的分离和鉴别、超重元素的人工合成以及化学性质研究等方面的工作中.本文简单地叙述了SISAK技术的流程、原理和发展现状,介绍了自行建立的国内第一套基于SISAK技术的快速化学分离装置,并通过从裂变产物中分离短寿命核素这一实例验证了SISAK技术在快速化学分离中的优越性.     

浅谈如何更好地推行工程量清单计价规范

《建设工程工程量清单计价规范》的颁布实施,是工程建设领域的一件大事,为了更好的推行和施行计价规范,应做好多方面的工作。     

Degradation Behaviors of Metal-Induced Laterally Crystallized n-Type Polycrystalline Silicon Thin-Film Transistors Under DC Bias Stresses

Device degradation behaviors of typical-sized n-type metal-induced laterally crystallized polycrystalline silicon thin-film transistors were investigated in detail under two kinds of dc bias stresses: hot-carrier (HC) stress and self-heating (SH) stress. Under HC stress, device degradation is the consequence of HC induced defect generation locally at the drain side. Under a unified model that postulates, the establishment of a potential barrier at the drain side due to carrier transport near trap states, device degradation behavior such as asymmetric on current recovery and threshold voltage degradation can be understood. Under SH stress, a general degradation in subthreshold characteristic was observed. Device degradation is the consequence of deep state generation along the entire channel. Device degradation behaviors were compared in low V_d-stress and in high V_d-stress condition. Defect generation distribution along the channel appears to be different in two cases. In both cases of SH degradation, asymmetric on current recovery was observed. This observation, when in low V_d-stress condition, is tentatively explained by dehydrogenation (hydrogenation) effect at the drain (source) side during stress     

偶联剂处理硅灰石填充不饱和聚酯树脂的研究

对针状硅灰石 (L∶D≥ 10∶32 5目 )提纯后 ,采用偶联剂进行表面处理 ,将硅灰石按不同比例填充于不饱和聚酯树脂体系中 ,研究了材料的性能。结果表明 ,改性后的硅灰石可显著改善不饱和聚酯的性能。     

纳米4-H碳化硅薄膜的掺杂现象

对纳米晶SiC薄膜进行了P和B的掺杂,B掺杂效率比P高,其暗电导预前因子与激活能遵守Meyer-Neldel规则,并有反转Meyer-Neldel规则出现.掺杂效率比非晶态碳化硅薄膜高是纳米碳化硅薄膜的特点之一.非晶态中的隧穿和边界透射对输运有一定贡献.     

江西省都昌县2000年旱情的思考

通过都昌县2000年旱情及受灾情况的分析，揭示了产生这种现象的原因，并且提出了相应解决问题的对策。     

YAG激光熔覆的研究现状与发展趋势

本文介绍了YAG激光熔覆的特点，并与CO2激光进行了比较，显示了YAG激光熔覆的优势和潜力。叙述了YAG激光熔覆的研究进展及其应用前景。     

Total transfer capability computation for multi-area power systems

This paper presents a method for multi-area power system total transfer capability (TTC) computation. This computation takes into account the limits on the line flows, bus voltage magnitude, generator reactive power, voltage stability, as well as the loss of line contingencies. The multi-area TTC problem is solved by using a network decomposition approach based on REI-type network equivalents. Each area uses REI equivalents of external areas to compute its TTC via the continuation power flow (CPF). The choice and updating procedure for the continuation parameter employed by the CPF is implemented in a distributed but coordinated manner. The proposed method leads to potential gains in the computational efficiency with limited data exchanges between areas. The developed procedure is successfully applied to the three-area IEEE 118-bus test system. Numerical comparisons between the integrated and the proposed multi-area solutions are presented for validation.     

基于图像灰度统计分布的高炉温度场动态定标算法

通过高炉红外图像建立料面温度场是判断高炉煤气流分布形态的一种有效方法,温度定标是建立温度场的基本问题之一.在高炉复杂、恶劣的环境下,本文以高炉十字测温为基础,通过热电偶温度数据和图像对应区域的灰度分布统计,动态地建立温度定标关系.算法具有较好的自适应性,实际生产运行表明,温度定标关系较好地适应了高炉炉况的不确定性,准确地反映了高炉温度场的变化情况.