Gangliosides as Biomarkers of Human Brain Diseases: Trends in Discovery and Characterization by High-Performance Mass Spectrometry

Gangliosides are effective biochemical markers of brain pathologies, being also in the focus of research as potential therapeutic targets. Accurate brain ganglioside mapping is an essential requirement for correlating the specificity of their composition with a certain pathological state and establishing a well-defined set of biomarkers. Among all bioanalytical methods conceived for this purpose, mass spectrometry (MS) has developed into one of the most valuable, due to the wealth and consistency of structural information provided. In this context, the present article reviews the achievements of MS in discovery and structural analysis of gangliosides associated with severe brain pathologies. The first part is dedicated to the contributions of MS in the assessment of ganglioside composition and role in the specific neurodegenerative disorders: Alzheimer’s and Parkinson’s diseases. A large subsequent section is devoted to cephalic disorders (CD), with an emphasis on the MS of gangliosides in anencephaly, the most common and severe disease in the CD spectrum. The last part is focused on the major accomplishments of MS-based methods in the discovery of ganglioside species, which are associated with primary and secondary brain tumors and may either facilitate an early diagnosis or represent target molecules for immunotherapy oriented against brain cancers.     

Polypropylene/silica micro‐ and nanocomposites modified with poly(styrene‐b‐ethylene‐co‐butylene‐b‐styrene)

The effects of different silica loadings and elastomeric content on interfacial properties, morphology and mechanical properties of polypropylene/silica 96/4 composites modified with 5, 10, 15, and 20 vol % of poly(styrene‐b‐ethylene‐co‐butylene‐b‐styrene) SEBS added to total composite volume were investigated. Four silica fillers differing in size (nano‐ vs. micro‐) and in surface properties (untreated vs. treated) were chosen as fillers. Elastomer SEBS was added as impact modifier and compatibilizer at the same time. The morphology of ternary polymer composites revealed by light and scanning electron microscopies was compared with morphology predicted models based on interfacial properties. The results indicated that general morphology of composite systems was determined primarily by interfacial properties, whereas the spherulitic morphology of polypropylene matrix was a result of two competitive effects: nucleation effect of filler and solidification effect of elastomer. Tensile and impact strength properties were mainly influenced by combined competetive effects of stiff filler and tough SEBS elastomer. Spherulitic morphology of polypropylene matrix might affect some mechanical properties additionally. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41486.     

Computing Optimal Diameter-Bounded Polygon Partitions

The minimum -small partition problem is the problem of partitioning a given simple polygon into subpolygons, each with diameter at most , for a given > 0. This paper considers the version of this problem that disallows Steiner points. This problem is motivated by applications in mesh generation and collision detection. The main result in the paper is a polynomial-time algorithm that solves this problem, and either returns an optimal partition or reports the nonexistence of such a partition. This result contrasts with the recent NP-completeness result for the minimum -small partition problem for polygons with holes (C. Worman, 15th Canadian Conference on Computational Geometry, 2003). Even though the running time of our algorithm is a polynomial in the input size, it is prohibitive for most real applications and we seek faster algorithms that approximate an optimal solution. We first present a faster 2-approximation algorithm for the problem for simple polygons and then a near linear-time algorithm for convex polygons that produces, for any > 0, an (+)-small partition with no more polygons than in an optimal -small partition. We also present an exact polynomial-time algorithm for the minimum -small partition problem with the additional constraint that each piece in the partition be convex.     

An Operator Approach to Tangent Vector Field Processing

In this paper, we introduce a novel coordinate‐free method for manipulating and analyzing vector fields on discrete surfaces. Unlike the commonly used representations of a vector field as an assignment of vectors to the faces of the mesh, or as real values on edges, we argue that vector fields can also be naturally viewed as operators whose domain and range are functions defined on the mesh. Although this point of view is common in differential geometry it has so far not been adopted in geometry processing applications. We recall the theoretical properties of vector fields represented as operators, and show that composition of vector fields with other functional operators is natural in this setup. This leads to the characterization of vector field properties through commutativity with other operators such as the Laplace‐Beltrami and symmetry operators, as well as to a straight‐forward definition of differential properties such as the Lie derivative. Finally, we demonstrate a range of applications, such as Killing vector field design, symmetric vector field estimation and joint design on multiple surfaces.     

Influence of solvent and temperature on extraction of phenolic compounds from grape seed,antioxidant activity and colour of extract

This study was aimed to investigate the influence of solvent (water and ethanol in concentration: 50%, 70% and 96%) and extraction temperature (25–80) °C on polyphenols extraction of grape seed (Vitis vinifera L. cv. “Frankovka”) cultivated in Eastern Croatia. The best results were reached using 50% ethanol at 80 °C. The most abundant individual polyphenolic compound was catechin which makes the average of 45.11% of the total phenolic content followed by epicatechin (34.45%), procyanidin B₂ (12.90%), gallic acid (5.34%), gallocatechin (1.58%), epicatechin gallate (1.01%). The antioxidant activity of extracts was determined by DPPH‐method and it was highly dependent on extraction solvent and temperature. The total extractable proanthocyanidins content of extract had the highest positive correlation (r = 0.994) with antioxidant activity, which indicated that these compounds might be the most important antioxidant in examined grape seed extracts. Relationship between phenolic content and colour of extracts was observed.     

Local pH variation as an initial step in bacterial surface-sensing and biofilm formation

The development of surface-associated layers of matrix-embedded microbial populations, called biofilms, is a serious problem in many medical and industrial settings. These contaminations are difficult to eradicate because of the high resistance level acquired by the cells in their particular environment. From the very beginning of the colonization process, modifications of gene expression are observed and could, at least partially, explain biofilm resistance. In order to develop anti-biofilm molecules and surface treatments, it is of pivotal importance to identify the physico-chemical parameters which activate the sensor systems of pioneering microbes when they come into contact with a surface. The aim of our study was to examine the pH variations in the local micro-environment created between the cell layer and the surface after bacteria adhesion. Using an ion-sensitive field effect transistor (ISFET), as a substratum, colonized by a curli hyperproducing strain known to form biofilms, we observed that the evolution of the pH change was significantly different in the micro-compartment in contact with the electrochemical sensor compared to that within the liquid phase.     

Preparation and magnetoelectric properties of NiFe2O4–PZT composites obtained in-situ by gel-combustion method

Magnetoelectric composites of xNiFe₂O₄–(1 ? x)Pb(Zr,Ti)O₃ with x = 2, 5, 10, 20, 30% were prepared by citrate–nitrate combustion using PZT-based template powders. In order to ensure a better connectivity of dissimilar phases, we have used chemical methods for preparation in situ composites, followed by adequate sintering procedure. The structural, microstructural and functional properties of di-phase magnetoelectric composites of NiFe₂O₄–PZT are reported. The XRD analysis is demonstrating the synthesis of pure ferrite phase directly on the ferroelectric templates. An excellent mixing was obtained in the composite powders, as proved by a detailed SEM analysis.The magnetic and dielectric behaviors of the ceramic composites vary with the ratio of the two phases. The dielectric behavior is greatly influenced by the magnetic phase. The magnetoelectric (ME) coefficient was measured as a function of applied DC magnetic field. The maximum ME coefficient (dE/dH) varies from 0.0011 mV/(cm Oe) to 0.5 mV/(cm Oe) with increasing of NF addition.     

Synthesis of optical transparent and electrical conductive polymer/nanocarbon composite films by infiltration method

Optical transparent and electrical conductive (PMMA)/nanocarbon composite films can be prepared through the infiltration of the polymer between the carbon aggregates of a preformed percolation cluster. This cluster is prepared by Langmuir-Blodgett technique as a thick film (2-20 μm in thickness). The performed direct current electrical measurements have shown that PMMA/Multiwall Nanotubes present a lower electrical surface resistivity and a higher optical transmittance than PMMA/carbon nanoparticles composite films. Much simpler and cheaper than other methods, the infiltration method allowed us to prepare composite films with a 75% in transparency and 1 MΩ/square in surface electrical resistivity. The composite films prepared by infiltration method have a good adhesion to the glass substrates but in some specific conditions can be integrally removed as free-standing films.