The effect of washing and heat treatment on the surface characteristics of fluorocarbon resin-treated polyester

Polyester fabrics and films treated with two fluorocarbon resins were washed and heat treated. Water repellency, surface tension and ESCA measurements were carried out. Changes in the water repellency of the resin-treated polyester fabric caused by washing and heat treatment are related to modification of the chemical composition of the polyester surface.     

Controlled vapor-pressure heat-treatment effect on deep levels in liquid-encapsulated czochralski-grown GaP crystals

Photocapacitance (PHCAP) measurements have been carried out on GaP crystals grown by the liquid-encapsulated Czochralski (LEC) method with heat treatment under various phosphorus-vapor pressures at different temperatures. Electron traps of E_C−1.1 eV, E_C−1.6 eV, E_C−1.9 eV, and a hole trap of E_V+2.26 eV are mainly detected. The phosphorus-vapor pressure dependence of the E_C−1.9 eV trap density and their diffusion behavior indicate that they are interstitial phosphorus atoms. The densities of both E_C−1.1 eV and E_C−1.6 eV traps are strongly dependent on the shallow impurity concentrations. Moreover, the density of E_C−1.1 eV traps increases with increasing phosphorus-vapor pressure. From these results, we suggest that E_C−1.1 eV traps are the complexes of shallow donors and antisite phosphorus atoms. Deep-level densities in GaP crystals after annealing at 860°C or 960°C for 60 min are decreased almost one order of magnitude lower than those in untreated substrate crystals, which should have occurred via out-diffusion of interstitial phosphorus atoms. However, such an effect is not prominent for 800°C treatment for 60 min.     

Cellular array processor CAP and applications

The general-purpose, highly parallel, cellular array processor (CAP) we developed features multiple-instruction stream, multiple-data stream (MIMD) processing and image display. Processor elements can number in several hundreds. The present system uses 256 processors. Each processor element consists of a general-purpose microprocessor, memory, and a special VLSI chip that performs parallel-processing-specific functions such as processor communication and synchronization. The VLSI has two 2M byte/s independent common bus interfaces for data broadcating and six 15M bit/s serial communication ports for local data communication. The chip also can process image data in real time for multiple processors. Use of the communication interfaces enables a variety of processor networks to be configured. One CAP application has been computer graphics, in which ray tracing is used to generate quality images.     

An economic and energy analysis on bio-hydrogen fuel using a gasification process

Recently, in Japan, recycling technologies have been developed using waste biomass material. Waste biomass is traded in the waste materials market between users and a third-party, who receives a fee for processing them. This study is an environmental and economic analysis of a biomass energy system, which can produce hydrogen fuel for fuel cells (purity of 99.99%) as an example of an environmental business model. The experimental apparatus was made based on the moving-bed gasifier by the German company, DM2 Inc., and the hydrogen gas yield was measured. Finally, the economic viability of the future hydrogen business was estimated.The experimental results obtained gave the gas concentration of 57.5% in a Steam/Carbon ratio of 1.40 at 900 °C.Assuming the plant scale of 10 t/d, the production amount of hydrogen gas would be 21.3 kg/h. Based on the law concerning waste processing in Japan, a sizeable amount of waste biomass could be expected. Therefore, if the processing fee which is paid to the group (contractor) ranges between 5.0 and 10.0 $/t, and if the whole investment cost is 6 million dollars and the depreciation period is 15 years, the bio-hydrogen production cost using the experimental data would be 5.75–7.86 $/kg-H₂ without receiving related subsidies. In a one-third grant proportion, the cost would become 4.60–6.72 $/kg-H₂.     

Properties of Bi-doped PbTe layers grown by liquid phase epitaxy under controlled Te vapor pressure

Effects of Bi doping in PbTe liquid-phase epitaxial layers grown by the temperature difference method under controlled vapor pressure (TDM-CVP) are investigated. For Bi concentrations in the solution, x_Bi, lower than 0.2 at.%, an excess deep-donor level (activation energy E_d≈0.03–0.04 eV) appears, and Hall mobility is low. In contrast, for x_Bi>0.2 at.%, Hall mobility becomes very high, while carrier concentration is in the range of 10¹⁷ cm⁻³. Inductive coupled plasma (ICP) emission analysis shows that, for x_Bi=1 at.%, Bi concentration in the epitaxial layer is as high as N_Bi=2.3–2.7 × 10¹⁹ cm⁻³. These results indicate that Bi behaves not only as a donor but also as an acceptor, and the nearest neighbor or very near donor-acceptor (D-A) pairs are formed, so that strong self-compensation of Bi takes place. Carrier concentration for highly Bi-doped layers shows a minimum at a Te vapor pressure of 2.2 × 10⁻⁵ torr for growth temperature 470°C, which is coincident with that of the undoped PbTe.     

100 Å-thick tunnel junction by double impurity doping liquid phase epitaxy for V-band TUNNETT oscillation

The tunnel injection transit time (TUNNETT) diodes with p⁺p⁺n⁺n⁻n⁺ structure were fabricated by liquid phase epitaxy (LPE). About 100 Å tunnel junction (p⁺n⁺) was successfully prepared by the double impurity diffusion of Ge and S during LPE growth. Continuous wave (CW) oscillation was realized at 51.520 GHz in the V-band cavity with the phase noise of −60 dBc/Hz at 1 kHz bandwidth.     

The potential of subtype-selective neuronal nicotinic acetylcholine receptor agonists as therapeutic agents

Neuronal nicotinic acetylcholine receptors (NAChRs) are pentameric ligand-gated ion channel receptors which exist as different functional subunit combinations which apparently subserve different physiological functions as indicated by molecular biological and pharmacological techniques. It is possible to design and synthesize novel compounds that have greater selective affinities and efficacies than nicotine for different NAChRs, which should translate into different behavioral profiles and therapeutic potentials. Examples of NAChR agonists studied are nicotine, SIB-1508Y, SIB-1553A and epibatidine. These compounds have different degrees of selectivity for human recombinant NAChRs, different neurotransmitter release profiles in vitro and in vivo and differential behavioral profiles. Preclinical studies suggest that SIB-1508Y is a candidate for the treatment of the motor and cognitive deficits of Parkinson's disease, whereas SIB-1553A appears to have potential as a candidate for the treatment of Alzheimer's disease. Epibatidine has a strong analgesic profile, however the ratio between pharmacological activity and undesirable effects is so low that it is difficult to envisage the use of this compound therapeutically. Nicotine has a broad profile of pharmacological activity, for instance demonstrating activity in models for cognition and analgesia. As for epibatidine, the adverse effects of nicotine severely limits its therapeutic use in humans. The discovery of subtype-selective NAChR agonists such as SIB-1508Y and SIB-1553A provides a new class of neuropsychopharmacological agents with better therapeutic ratios than nonspecific agents such as nicotine.