The Effect of Nucleators on the Quality of the Surface of Glass-Ceramic Denture Coatings

The effect of nucleator additives on the surface relief and the degree of crystallization of material intended for the dentine and enamel layers of artificial denture is considered. It is established that hydroxyapatite additive is optimal for producing the required relief in the prime and dentine layers.     

Analysis of supersaturation and nucleation in a moving solution droplet with flowing supercritical carbon dioxide

A supercritical antisolvent (SAS) process is employed for production of solid nanoparticles from atomized droplets of dilute solution in a flowing supercritical carbon dioxide (SC CO₂) stream by attaining extremely high, very rapid, and uniform supersaturation. This is facilitated by a two‐way mass transfer of CO₂ and solvent, to and from the droplet respectively, rendering rapid reduction in equilibrium solubility of the solid solute in the ternary solution. The present work analyses the degree of supersaturation and nucleation kinetics in a single droplet of cholesterol solution in acetone during its flight in a flowing SC CO₂ stream. Both temperature and composition are assumed to be uniform within the droplet, and their variations with time are calculated by balancing the heat and mass transfer fluxes to and from the droplet. The equilibrium solubility of cholesterol with CO₂ dissolution has been predicted as being directly proportional to the Partial Molar Volume Fraction (PMVF) of acetone in the binary (CO₂–acetone) system. The degree of supersaturation has been simulated up to the time required to attain almost zero cholesterol solubility in the droplet for evaluating the rate of nucleation and the size of the stable critical nuclei formed. The effects of process parameters have been analysed in the pressure range of 7.1–35.0 MPa, temperature range of 313–333 K, SC CO₂ flow rate of 0.1136–1.136 mol s^?1, the ratio of the volumetric flow rates of CO₂‐to‐solution in the range of 100–1000, and the initial mole fraction of cholesterol in acetone solution in the range of 0.0025–0.010. The results confirm an extremely high and rapid increase in degree of supersaturation, very high nucleation rates and stable critical nucleus diameter of the order of a nanometre. Copyright © 2005 Society of Chemical Industry     

Modular and rapid testing of SOCs with unwrapped logic blocks

Extensive research has been carried out for test planning of core-based system-on-a-chip devices. Most of the prior work assumes that all of the embedded cores are wrapped for test purpose. However, some designs may contain user-defined logic or cores that cannot be wrapped due to area constraints or timing violations. This paper discusses how these unwrapped logic blocks can be tested rapidly by adapting the TestRail architecture, which uses only the test control mechanism and the test instructions available through the IEEE 1500 standard for embedded core test. A new test scheduling algorithm, which facilitates a concurrent test of both unwrapped logic blocks and IEEE 1500-wrapped cores, is proposed, and experiments show that it outperforms a previous approach when the available number of tester channels and/or the number of unwrapped logic blocks are small.     

Estimation of fouling in a plate heat exchanger through the application of neural networks

Pasteurization is an important, if not the most important, process step in the packaging of milk. It is subject to alterations stemming from the variation in the temperature, pH and raw milk quality. The variability may manifest itself in changes in the formation of the deposit (fouling) in the pasteurization unit, such that there is a need for tools, both instrumentation and computational, to help in monitoring the process and keeping it on the desired course. In this paper we describe a practical procedure based on artificial neural networks (ANN) that allows prediction of the deposit thickness, the overall heat transfer coefficient and the critical time (the time that the unit has to be stopped for cleaning) for reducing the impact of fouling on such processes. The procedure determines when the cleaning operation is required once the system is under critical conditions of operations. A combination of fundamental studies and plant measurements were used for study of the operating conditions and thus evaluation of the trades‐offs between operating conditions and longer operating life span. The results are encouraging, enough to validate current operating industrial techniques. Copyright © 2005 Society of Chemical Industry     

Intraoperative neurological monitoring

Intraoperative neurological monitoring (INM) is the evaluation of the nervous system within the operating room (OR) environment. In this paper, the INM system is tested in a clinical setting in comparison with conventional somatosensory evoked potential (SEP) monitoring. The study results demonstrate the capability of the INM system in extracting clearer and more stable SEP signals. The high SNR of SEP signals collected in various clinical environments, including the OR, makes the INM system a robust platform for continuous monitoring. While the current use of EP monitoring is limited to intermittent analysis by a highly trained clinical neurophysiologist, the authors believe in changing this paradigm by developing continuous monitoring systems, such as the INM system, capable of automated quantitative EP analysis. This noninvasive monitoring modality will allow for a wider range of use in clinical practice. Based on volunteer and clinical patient studies, the INM monitoring system demonstrates much greater reliability and accuracy via the artifact rejection and denoising strategies. It provides more strategic filtering options for different situations under which the clinical SEP response signal could be greatly contaminated and distorted. Furthermore, the INM system offers a promising approach to signal extraction in real-time monitoring during SEP research.     

A rate adaptive bit-loading algorithm for in-building power-line communications based on DMT-modulated systems

This paper deals with a variable rate discrete multitone modulation system for broadband power-line communications, based on the bit-loading algorithm proposed by Leke and Cioffi. In the proposed system a suitable least mean square channel estimator is considered, which is based on the insertion of a training sequence (TS). The proposed approach will be compared with the ideal channel estimates, showing its effectiveness. Moreover, different TS lengths will be compared. The system performance, expressed in terms of bit rate and bit-error rate, is derived by simulation with and without estimation errors. The propagation environment has been assumed as a frequency-selective multipath fading channel with additive colored Gaussian noise, according to the in-building networks model.     

All-Optical Vestigial Sideband Generation Using a Semiconductor Optical Amplifier

An all-optical setup to generate vestigial sideband signals based on self-phase modulation in a semiconductor optical amplifier is experimentally demonstrated at 10 Gb/s. Sideband suppressions higher than 15 dB are reported with improved eye opening. Wavelength-independent operation over 26 nm is demonstrated. Increased chromatic dispersion tolerance is verified: a receiver sensitivity penalty of 5.3 dB, relative to back-to-back, is obtained after transmission over 2720 ps/nm; whereas conventional double sideband is penalized by 4.0 dB after 1360 ps/nm     

Discrete-time spare ordering policy with randomized lead times and discounting

The paper considers a generalized discrete‐time order‐replacement model for a single unit system, which is subject to random failure when in operation. Two types of discrete randomized lead times are considered for a spare unit; one is for regular (preventive) order and another is for expedited (emergency) order. The model is formulated based on the discounted cost criterion. The underlying two‐dimensional optimization problem is reduced to a simple one‐dimensional one and then the optimal ordering policy for the spare unit is characterized under two extreme conditions: (i) unlimited inventory time and (ii) zero inventory time for the spare unit. A numerical example is used to determine the optimal spare‐ordering policy numerically and to examine the sensitivity of the model parameters.     

Microbial conversion of selected azo dyes and their breakdown products.

Four selected azo dyes (acid orange 6, acid orange 7, methyl orange and methyl red) were completely decolourised in the presence of anaerobic granular sludge, while only methyl red was degraded in aerobic conditions using a conventional activated sludge. Additional experiments with culture broth devoid of cells showed that anaerobic decolourisation of azo dyes was performed by extracellular reducing agents produced by anaerobic bacteria. This was further confirmed by abiotic experiments with sulphide and NADH. The presence of redox mediators such as riboflavin led to dramatic acceleration of the anaerobic biodecolourisation process. The azo dye reduction products were found to be sulphanilic acid and 4-aminoresorcinol for acid orange 6; sulphanilic acid and 1-amino-2-naphthol for acid orange 7; N,N-dimethyl-1,4-phenylenediamine and sulphanilic acid for methyl orange; and N,N-dimethyl-1,4-phenylenediamine and anthranilic acid for methyl red. Anaerobic toxicity assays showed that the azo dyes were more toxic than their breakdown products (aromatic amines), except 1-amino-2-naphthol. In the presence of activated sludge, only anthranilic acid was completely mineralised while sulphanilic acid was persistent. 4-aminoresorcinol, 1-amino-2-naphthol and N,N-dimethyl-1,4-phenylenediamine underwent autooxidation in aerobic conditions yielding coloured polymeric products. On the contrary, in the presence of granular methanogenic sludge, 4-aminoresorcinol, 1-amino-2-naphthol and anthranilic acid were quantitatively methanised, sulphanilic acid was partially (70%) mineralised while N,N-dimethyl-1,4-phenylenediamine was only demethylated producing 1,4-phenylenediamine as an end product.     

The Grey-Rankin bound for nonbinary codes

The Grey-Rankin bound for nonbinary codes is obtained. Examples of codes meeting this bound are given. Original Russian Text Ş L.A. Bassalygo, S.M. Dodunekov, V.A. Zinoviev, T. Helleseth, 2006, published in Problemy Peredachi Informatsii, 2006, Vol. 42, No. 3, pp. 37–44. Supported in part by the Russian Foundation for Basic Research, project no. 06-01-00226.