Chemistry and melting characteristics of fireside deposits taken from boiler tubes in waste incinerators

Twenty-three tube deposits taken from seven heat-recovery boilers of municipal solid waste incinerators were examined by chemical analyses and X-ray diffraction. These deposits were measured by Differential Scanning Calorimeter (DSC) in N₂ to investigate their melting characteristics. Sixteen deposits were used to evaluate their corrosiveness to carbon steel by high-temperature corrosion test conducted at 400 °C for 20 h in 1500 ppm HCl – 300 ppm SO₂ – 7.5%O₂ – 7.5%CO₂ – 20%H₂O – N₂. Total heat of endothermic reactions of the deposits taking place between 200 and 400 °C can be related to the corrosion rate of carbon steel at 400 °C. Corrosion initiated at temperatures when the deposits started to melt, became severe when fused salt constituents increased, and alleviated when the majority of the deposits became fused. The corrosion can be interpreted as fused salt corrosion caused by chloride and sulfate salts.     

Superhydrophobic/superhydrophilic micropatterning on a carbon nanotube film using a laser plasma-type hyperthermal atom beam facility

Superhydrophobic/superhydrophilic micropatterning on a carbon nanotube (CNT) film has been achieved using a laser plasma-type hyperthermal atom beam facility, which produces a small amount of damage and generates a highly anisotropic beam. Fluorination and oxidation on CNT films by exposure to fluorine-atom and oxygen-atom beams caused superhydrophobic and superhydrophilic surfaces, respectively, while maintaining the as-grown fibrous forms of the CNT films. Micropatterned oxidation on CNT films without using photoresists created superhydrophilic microdots and microchannels.     

Deformation-induced martensitic transformation behavior in cold-rolled and cold-drawn type 316 stainless steels

We investigate deformation-induced martensitic transformation behavior in cold-rolled and cold-drawn specimens of type 316 stainless steel. Deformation-induced martensite preferentially nucleates at the twin boundary between the austenite matrix and a deformation twin. In the cold-rolled specimen, martensite formed at the twin boundary has a Kurdjumov–Sachs (K–S) relationship with both the austenite matrix and the deformation twin (“double K–S relationship”). In the cold-drawn specimen, two kinds of deformation twins with different twin planes are typically formed, and therefore deformation-induced martensites are formed where the deformation twin boundaries intersect: martensite thus has an imperfect “triple K–S relationship” with the austenite matrix and the two deformation twins. The complicated crystallographic orientation relationship between austenite and martensite grains strongly restricts the formation of some variants of deformation-induced martensites. Because of the difference in number of nucleation sites in the cold-drawn and cold-rolled specimens, martensitic transformation is more enhanced in the former than in the latter.     

Ferroelectric properties of ultrathin films of Nylon 11

Ferroelectric properties of ultrathin films of Nylon 11 were investigated. The thickness was in the range of 25 to 55 nm. Ferroelectric response was largely affected by thermal annealing and following cooling conditions. Thermal annealing at higher temperature followed by quenching in liquid nitrogen gave larger remanent polarization and smoother surface, whereas cooling down in an ambient atmosphere caused smaller remanent polarization and rough surface. Surface roughness strongly affected the polarization reversal and remanent polarization. Hydrogen bonding in crystal was also significantly related to the polarization reversal and thus remanent polarization.     

LD抽运的Cr4+∶YAG被动调Q Nd∶YAG激光器

研究了不同谐振腔下不同透射率的Cr4 + ∶YAG调Q的激光输出特性。采用透射率为 82 %的Cr4 + ∶YAG ,在抽运功率 1 1W时 ,激光重复频率小于 3kHz,单脉冲能量达 2 0 μJ ,可以作为微脉冲激光雷达的发射光源。分析和比较了实验结果和理论计算 ,两者吻合较好     

Purification and some properties of a chitinase from Xanthomonas sp. strain AK

Chitinase B (ChiB) was purified from the culture supernatant of Xanthomonas sp. strain AK by Phenyl-Toyopearl 650M and DEAE-Toyopearl 650M column chromatographies. The purified enzyme preparation gave a single band on SDS-polyacrylamide gel electrophoresis and the molecular weight of ChiB was estimated to be 48,000. The enzyme was optimally active at pH 6.0 and 60 degrees C. N-Terminal amino acid sequence analysis suggested that ChiB is a member of glycosyl hydrolase family 18 and that it is genetically different from ChiA recently reported (Sakka et al., J. Ferment. Bioeng., 86, 527-533, 1998). Immunological analysis suggested that ChiB was the major chitinase species in the culture supernatant of Xanthomonas sp. strain AK and that production of the enzyme was induced by the presence of chitin.     

Heat-resisting TCO films for PV cells

We developed new heat-resisting transparent conductive oxide (TCO) films with resistivity of 1.4×10⁻⁴ Ω cm, an optical transmittance of above 80% (at 550 nm) and heat-resisting temperature at above 600 °C. The TCO films consists of fluorine-doped tin oxide films coated on indium–tin oxide films. They were prepared by a spray pyrolysis deposition method on glass substrates. The 100×100 mm² dye-sensitized solar cells (DSCs) were prepared with the TCO films. An energy conversion efficiency of the DSC was improved drastically in comparison to the case with conventional TCO films.     

Thermodynamic properties of the BaO-MnO flux system

Although a great number of works on BaO-bearing fluxes for refining Fe-Cr and Fe-Mn alloys have been carried out, there still remain several unresolved problems on using them in the refining process. The principal aim of the present study is to understand the thermodynamic properties of the BaO-MnO system, which has been shown to be very effective for dephosphorization of Fe-Mn alloys. The activity of manganese oxide in the BaO-MnO flux was measured at 1573 and 1673 K by equilibrating the flux, a Ag-Mn alloy, and a gas mixture of CO and CO₂ as functions of the flux composition and temperature. The influence of BaF₂, which is an effective additive for lowering the melting temperature of the flux, on the thermodynamics of the BaO-MnO system, including the solubility of MnO in the BaO-BaF₂ system, was also investigated.     

Recent development of nucleic acid drug

The dynamics of ovarian follicular development and the pattern of pituitary and ovarian hormone concentration were investigated during the luteal phase in ewes with autotransplanted ovaries. The follicles were measured by ultrasound and samples of ovarian and jugular venous blood were collected at intervals of 12 h. Blood samples were collected before and after a GnRH challenge (250 ng GnRH, i.v.) to allow the determination of basal and LH-stimulated concentration of ovarian steroids. Throughout the luteal phase, large antral follicles developed in three waves, each of which was preceded by a rise in the concentration of FSH (P < 0.05). The concentrations of oestradiol and androstenedione in the unstimulated and LH-stimulated samples were similar (P > 0.05) during the first 3 days of the luteal phase but differed thereafter, with the LH-stimulated being significantly higher than the basal concentrations (P < 0.05). In the first wave of follicular development the changes in follicular size were accompanied by an increase in the concentration of ovarian steroids and inhibin A. During the second follicular wave, although changes in follicle diameter were similar to the first wave (P > 0.05), the basal concentration of ovarian steroids and inhibin A remained unchanged throughout the period of emergence and demise of the large follicles. These results confirm that the development of large antral follicles during the luteal phase of the sheep occurs in successive waves that are associated with fluctuations in FSH secretion. However while the results strongly suggest that fluctuations in both inhibin A and oestradiol secretion control FSH during the first follicular wave, the cause of the FSH fluctuations associated with waves two and three is unclear. Final resolution of this issue may need to await the development of a specific assay for dimeric inhibin B.     

Surface structures of synthetic diamonds

Diamond crystals of about 2 mm in size were grown by the temperature gradient method using Ni, Ni-Fe alloy and Fe as solvent metals. Several characteristic patterns were seen on the surfaces of the grown diamonds and were found to correspond to the texture of the quenched solvent metals. A vague vein-like pattern appeared when Ni was used. The surface patterns became finer with the increase of the content of Fe in Ni-Fe alloy, and when 70 wt% Fe-30 wt% Ni alloy was used, very fine dendritic patterns were seen on all of the faces of diamond in accordance with the symmetries of the lattice. The patterns are formed by the precipitation of carbon atoms in the space of the dendrites of the solvent metals during the quenching process. Lamellar patterns and etch pits were seen when Fe was used. The patterns are formed when Fe dissolves the diamond surfaces to produce Fe₃C during the quenching process.