Enhancement of the thermoelectric figure of merit in p- and n-type Cu/Bi-Te/Cu composites

The resultant thermoelectric properties of welded Cu/Bi-Te/Cu composites were measured at 298 K as a function of relative thickness x of Bi-Te compound by changing the interval s between two thermocouples and compared with those calculated as a function of x by treating it as an electrical and thermal circuit. These composites were prepared by welding with eutectic solder of Pb-Sn, after one end surface of the as-grown p- and n-type Bi-Te ingots were plated with Ni. It was found that the observed ZT of composites has a local maximum at an optimum x even when s was changed, as in the case of Cu/Bi-Sb/Cu and Ni/Bi-Sb/Ni composites with various relative thicknesses. Appearance of a local maximum in ZT is owing to the barrier thermo-emf generated by a sharp temperature drop at the interface between Bi-Te compound and copper. It may be caused by the separation of non-equilibrium carriers at the interface between them. The observed maximum ZT values at 298 K of the p- and n-type composites reached surprisingly great values of 1.53 and 1.66 at x=0.98, which correspond to about twice as large as those of commercially utilized Bi-Te compounds. This enhancement of ZT is available for generators, but may be not utilizable as a Peltier module. The composite materials were thus found to be utilizable as useful means of further increase in ZT of macroscopic bulk materials.     

Reliable indirect competitive ELISA used for a survey of ochratoxin A in green coffee from the North of Paraná State, Brazil.

The performance of an indirect competitive enzyme-linked immunosorbent assay (ic-ELISA) based on a monoclonal antibody (mAb) for ochratoxin A (OTA) detection was evaluated in a comparative study with high-performance liquid chromatography (HPLC) analysis using 68 freshly harvested coffee samples from the North of Paraná State, Brazil. The anti-OTA mAb showed high specificity and low cross-reactivity with OTA analogues (OTB and OTalpha), but cross-reacted with OTC. This ic-ELISA showed a detection limit of 3.75 ngg-1 sample, when compared to 0.80 ngg-1 by HPLC, with an ic-ELISA/HPLC correlation coefficient of 0.90. As regards OTA analysis of these coffee samples, natural contamination was detected in 10 samples (14.7%) by both methods, where the ic-ELISA values (range 3.9-7.3 ngg-1) were 1.1 to 1.6-fold higher than HPLC data (2.7-4.7 ngg-1). Five samples (7.4%) were OTA positive (range 0.84-1.30 ngg-1) only by HPLC assay, probably due to the higher detection limit reached by ic-ELISA. OTA was undetectable in 53 samples (77.9%) by both methods, while all positive samples (range 0.84-7.30 ngg-1) showed OTA levels lower than 8 ngg-1 (maximum limit recommended by the European Union). The matrix interference of green coffee was minimized by dilution of sample extracts before carrying out the ELISA assay. This mAb-based ic-ELISA can be effectively applied for OTA screening in coffee, because it is simple, sensitive and sample preparation is easy.     

Comparison of measured value and calculated value of multiplestability in forced-flow cooled superconductors

The multiple stability observed exclusively in forced-flow cooled superconductors is numerically calculated, and the result is quantitatively compared with the value measured by J.W. Lue et al. (1980). The calculated and measured values agreed well in certain cases, and did not in others. Based on this comparison, the effects of the transient heat transfer coefficient and ohmic heat generation on the quantitative prediction of stability are discussed. From this comparison, it is learned that a precise understanding of the transient heat transfer coefficient is essential for reliable predictions, and also that the ordinary evaluation method of ohmic heat generation, which considers the flux-flow resistance, tends to overevaluate the situation     

Surface structures of synthetic diamonds

Diamond crystals of about 2 mm in size were grown by the temperature gradient method using Ni, Ni-Fe alloy and Fe as solvent metals. Several characteristic patterns were seen on the surfaces of the grown diamonds and were found to correspond to the texture of the quenched solvent metals. A vague vein-like pattern appeared when Ni was used. The surface patterns became finer with the increase of the content of Fe in Ni-Fe alloy, and when 70 wt% Fe-30 wt% Ni alloy was used, very fine dendritic patterns were seen on all of the faces of diamond in accordance with the symmetries of the lattice. The patterns are formed by the precipitation of carbon atoms in the space of the dendrites of the solvent metals during the quenching process. Lamellar patterns and etch pits were seen when Fe was used. The patterns are formed when Fe dissolves the diamond surfaces to produce Fe₃C during the quenching process.     

The relationship between ductility and grain-boundary precipitates in an Al-6.0% Zn-2.6% Mg alloy

The relationship between ductility and material parameters such as grain-boundary (GB) precipitate size and dimple size in an Al-6.0% Zn-2.6% Mg alloy has been studied. Under the condition of a given GB precipitate size, the ductility increases with decreasing number of GB precipitates and dimples per unit area. The critical GB precipitate sizes acting as the nuclei for void formation are deduced.     

TTT System (50 Mbits/s PCM-TDMA System With Time Preassignment and TASI) and Its Satellite Test Results

An experimental 50 Mbits/s pulse-code modulation-time-division multiple access (PCM-TDMA) system with time preassignment and time-assignment speech interpolation (TASI) features (called the TTT system) was built for use in a satellite test. This system was designed for application in the INTELSAT IV network and has the channel capacity of more than 700 telephone channels. This capacity can be increased up to twice when pulse-code modulation-time-assignment speech interpolation (PCM-TASI) is adopted. The field test was conducted via INTELSAT III in 1970 and satisfactory results were obtained, which encourages the introduction of the TDMA system for commercial use.     

Isolation and characterization of a novel gene encoding alpha-L-arabinofuranosidase from Aspergillus oryzae

We cloned and characterized a novel gene (abfA) encoding alpha-L-arabinofuranosidase (alpha-L-AFase) from Aspergillus oryzae. One clone homologous to the alpha-L-AFase gene of Thermotoga maritima was found in an expressed sequence tag (EST) library of A. oryzae and a corresponding gene was isolated. Molecular analysis showed that the abfA gene carried six exons interrupted by five introns and had an open reading frame encoding 481 amino acid residues. The amino acid sequence similarity at active sites to the alpha-L-AFases from other organisms indicated that the alpha-L-AFase encoded by abfA was classified as a family 51 glycoside hydrolase. When the abfA was overexpressed in the homologous hyperexpression system of A. oryzae, a large amount of alpha-L-AFase was produced as intracellular protein. The apparent molecular mass of the purified enzyme was estimated to be 228,000 by gel filtration and that of its subunit as 55,000 by SDS-PAGE, suggesting that the enzyme is a tetramer. The enzyme hydrolyzed p-nitrophenyl-alpha-L-arabinofuranoside but not other p-nitrophenyl glycosides. These results demonstrated that the abfA gene encodes a functional alpha-L-AFase.     

Effect of lattice constant of zinc oxide on antibacterial characteristics

Zinc oxide powders were heated in different atmospheres at 800 and 1400 degrees C, of which the characterization and the antibacterial activity were studied by X-ray diffractometry and the measurement of the change in electrical conductivity with bacterial growth. The diffraction peaks corresponding to zinc oxide with hexagonal type structure were detected in all samples, which shifted in low-angle side with the increase in the oxidizability of atmosphere during heat-treatment. From the results of calculating lattice constants, a0 and c0, it was found that the value of c0 in hexagonal structure increased with the increase in the oxidizability of atmosphere. On the samples heated at 1400 degrees C, the changes of the c0 value were less than those at 800 degrees C. However, no change of the a0 value showed, irrespective of atmosphere and temperature. Hydrogen peroxide that contributes to the occurrence of antibacterial activity was found to generate from all samples, and the generation amount increased with the increase of c0 value; incidently the amount in the samples heated at 1400 degrees C was less than that at 800 degrees C. The antibacterial activity of zinc oxide increased with the increase of c0 value; that is, it was found that the value of c0 in crystal structure affected the antibacterial activity of zinc oxide.     

Finite element iterative techniques for determining the interface boundary between Laplace and Poisson domains—characteristic analysis of a field effect transistor

Two kinds of techniques for solving a shape determination problem are proposed. The determination of the interface boundary between two domains governed by Poisson and Laplace equations under the compatible and constraint condition is considered. Influence coefficient and inverse variational approaches are examined by using the iterative finite element procedure. A two-dimensional model of a junction-type field effect transistor is a test example. The determination of its interface boundary and the prediction of the potential distribution and static characteristic are demonstrated.     

Dynamic observations of the fracture phenomena in alpha/beta brass two-phase bicrystals

In situ dynamic observations of the deformation and fracture characteristics of alpha/beta brass two-phase bicrystals were made by the solid diffusion method. The results indicated clearly that the crack initiation site was at the interface. The crack propagation direction, in both the alpha and beta phases, was found to be orientation dependent. Complementary experiments on alpha and beta brass single crystals confirmed the theories and results obtained previously on ductile single crystals.On leave from the Mechanical Engineering Department, Al-Azhar University, Cairo, Egypt.