Solution and applications of the Lyapunov equation for controlsystems

Recent advances in control systems analysis and design have implied new uses for the Lyapunov equation of the form AX+XA^T+Q=0. Implementation requirements for the incorporation of the use of Lyapunov equations in practical design, however, point out the need for a set of specialized numerical procedures. This special set of numerical procedures must efficiently solve large, sparse Lyapunov equations, solve sets of Lyapunov equations that differ only in the coefficient matrix Q, and provide good low rank estimates of the Lyapunov equation solution X in the case where low rank approximations are applicable. Discussions of the motivations for the solution of these problems and of candidate solution approaches are provided     

Low-temperature interface reaction in aluminium-silicon carbide particulate composites produced by mechanical alloying

An experimental investigation has been carried out on the reaction that takes place between 3 and 20 μm SiC particles and the aluminium alloy 1050 matrix of composite materials prepared by a mechanical alloying process. The work is different from that undertaken by other researchers in that the SiC-Al interface reaction has been studied in the temperature range 853–933 K, i.e., with the matrix initially in the solid state. Differential thermal analysis, X-ray diffraction and scanning electron microscopy all show that the SiC-Al reaction initiates in the solid state at temperatures as low as 883 K. The reaction produces Al4C3 and Si, the latter entering into solid solution in the aluminium matrix. At temperatures exceeding 903 K, the reaction produces a liquid phase and at this stage the speed of the interface reaction increases significantly. The results are discussed in terms of Al-Si-C metastable equilibrium and the kinetics of the reaction. This revised version was published online in November 2006 with corrections to the Cover Date.     

Interaction of powder microparticles with the steel matrix under dynamic action

Conclusions In dynamic interaction of powder particles and the steel matrix at the points of their retarding and stoppage, significant high-velocity plastic deformation occurs according to shear, rotational, and twinning mechanisms, which, together with local microalloying of the matrix with elements of the particles, promotes additional hardening of the steel. Processes of complete restoration of the structure in these areas are undesirable since they reduce the effect of hardening of the steel with dispersed particles.Dnepropetrovsk Metallurgical Institute. Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 2, pp. 44–45, February, 1991.     

Optical phase conjugation of multiwavelength signals in adispersion-shifted fiber

Optical phase conjugation (OPC) of multiwavelength signals in a dispersion-shifted fiber (DSF), which can be used for dispersion compensation in the wavelength division multiplexing communication system, is theoretically studied. The multiwavelength phase-conjugate signals are generated by four-wave mixing (FWM) in the dispersion-shifted fiber. There are the pulse-shape distortion and the induced frequency chirping in the phase-conjugate signals owing to pump depletion and the cross-phase modulation among the signals and phase-conjugate signals, respectively. The FWM among the pump wave, signals, and phase-conjugate signals causes unequal conversion efficiencies for the multiwavelength signals and enhances the induced frequency chirping in the phase-conjugate signals. The induced frequency chirping may deteriorate the restoration of the pulse shape. Both the pulse-shape distortion and induced frequency chirping increase with the signal and pump powers. The formula for the induced frequency chirping that is only caused by the signals through cross-phase modulation is derived. The requirement of the signal power in the dispersion-shifted fiber for the restoration of the pulse shape by the optical phase conjugation is estimated and numerically verified     

Preparation of Poly(D,L-Lactide/Glycolide) Nanoparticles of Controlled Particle Size Distribution: Application of Experimental Designs

This study investigates the use of the solvent evaporation method for preparing acid and glycolic acid-based copolymer nanoparticles. Initially, appropriate technological and formulation factors for elaboration of polymeric particles were selected by screening. Most favourable results were obtained using polyvinyl alcohol as a dispersing agent and a high pressure homogenizer to reduce the droplet size of the emulsion initially formed. On the basis of the conclusion thus drawn, a composite rotational experimental design was employed to evaluate the joint influence of three formulation variables (phase volume ratio of the emulsion formed, polymer concentration and homogenization pressure) on the micromeritic properties of the suspension finally obtained (mean particle size, coefficient of variation and polydispersity of the particle size distribution). Analysis of variance corresponding to the experimental design, showed a significant influence of the volume phase ratio and the polymer concentration on the mean particle size and the coefficient of variation, whereas the polydispersity is also affected by the homogenization pressure. Considering this information, a 3² experimental factorial design was then selected to investigate the possible interaction between the phase volume ratio and the concentration of polyvinyl alcohol in the aqueous phase. Analysis of variance and subsequent sequencial regression analysis evidenced last hypothesis providing the way to determine the experimental conditions required to achieve a specific particle size distribution.     

Ein stochastisches,schadensmechanisches Versagensmodell für Komposite

A stochastic damage mechanics failure model of composites This paper focuses on the theoretical simulation of strength and failure of specimens with nonlocal damage. A concept is proposed for quantitative interpretation and prediction of nonlinear. nominal stress-strain curves of damaged materials like fine ceramics or intermetallic alloys. For that reason methods of damage mechanics and of probability theory are combined.     

Einfluß der Korngröße auf mechanische Eigenschaften und den ungeschmierten reversierenden Gleitverschleiß von Al2O3-Keramik

Influence of grain size on mechanical properties and dry oscillating sliding wear of Al₂O₃-ceramics Specimens with average grain sizes varying between about 0.8 μm and 12 μm were produced by cold isostatic pressing of high purity Al₂O₃-powder followed by sintering between 1300°C and 1700°C. Hardness, Young's modulus, bending strength and fracture toughness were measured as a function of average grain sizes. Tribological tests were carried out on the different microstructures at normal laboratory air and room temperature by using a ring-on-block tribometer. Experimental results showed the dependence of mechanical properties on grain size, hardness and bending strength obeying a Hall-Petch type relation, approximately. Coefficient of friction was relatively independent of grain size under the test conditions used. However, wear intensity increased substantially if a critical grain size was surpassed. This was due to a change in mechanisms of material removal which was confirmed by scanning electron microscopical studies of the worn surfaces.     

Quantitative NMR spectroscopy by matrix pencil methods

The matrix pencil (MP) method, based on the singular value decomposition (SVD), is applied to quantitative NMR spectroscopy. Its relationship to other SVD-based methods is also presented. Simulations and applications are given to demonstrate the capability of superior performance.©1993 John Wiley & Sons Inc     

Air Filtration and Radon Decay Product Mitigation

Air cleaning as a means of mitigating the risks arising from exposure to indoor radon progeny has been evaluated in a single-family house in the north eastem US. using an automated, semi-continuous activity-weighted size distribution measurement system. The measurements included radon concentration, condensation nuclei count, and activity-weighted size distribution of radon decay products. Measurements were made in the house with and without an operating air filtration system and with various particle sources common to normal indoor activities operating. Aerosols were generated by running water in a shower, candle burning, cigarette smoking, vacuuming, opening doors, and cooking. Using a room model, the changes in attachment rates, average attachment diameters, and deposition rates of the unattached fraction with and without the air cleaning system were calculated. In the presence of active aerosol sources, the air filtration unit typically reduced the concentration of particles within the hour following the end of particle generation. After candle burning, cigarette smoking, and vacuuming in the bedroom, the reductions of PAEC by air filtration are about 60% with the air filtration system operating in the bedroom. During cooking in the kitchen, the reductions of PAEC in the bedroom with the air filtration system were about 40%. However, for all cases the dose reductions were smaller than the particle and PAEC reductions. For those particles that were generated within the bedroom, there was a 20% to 50% reduction in dose. In the case of cooking where the door was open and particles infiltrated from the rest of the house, the dose reduction was only 5% on average and appears to be insignificant. Thus, the dose reductions were h e r than the reductions in activity concentration, but there were no cases where the estimated dose actually increased.     

Synthesis of fine composite particles for hydrogen storage, starting from Mg-YNi2 mixture

We synthesized new composite particles for hydrogen storage on the basis of an idea of “particle designing”. As starting materials, powders of Mg and YNi₂ were selected. Fine composite particles containing mainly Mg₂Ni could be designed by repetitive hydriding and dehydriding cycles at 673 K. In the synthesis process of the composite particles, the following two points were found to be essential for this technique. The first point is that, after being activated by the sequential processes of hydrogenation, amorphization and disproportionation, YNi₂ reacts effectively with Mg. The second point is that evaporated Mg, which occurs during dehydriding, adheres to the surface of the activated YNi₂ and accelerates a diffusion reaction to form Mg₂Ni at the interface. In these composite particles, Mg₂NiH₄ is formed, even at 373 K, under a hydrogen pressure of 5 MPa.