The effect of microstructure on hydrogen permeability of high strength steels

Hydrogen diffusivity and trapping have been studied in two advanced high strength steel grades and model samples using electrochemical permeation test. Microstructures of CP1000 and DP1000 steels consist of ferrite, martensite and a small fraction of retained austenite. In addition, bainite is present in CP1000. Model phases with predominance of a particular phase have been prepared by specific heat treatment. DP1000 has shown the lowest diffusivity among all materials, while ferritic model sample has shown the highest. Differences in hydrogen diffusion coefficient values are linked to trapping microstructural characteristics and grain size.     

A comparative study of direct and indirect evaluation of piezoelectric properties of electrophoreticaly deposited (Ba,Ca) (Zr,Ti)O3 lead-free piezoceramics

The development and optimisation of piezoceramics are targeted usually to enhance their piezoelectric properties evaluated by both the direct or indirect measurement methods. The presented work aims to elaborate on the correlation of one direct (Berlincourt) and two indirect (convert and field-dependent) piezoelectric measurement methods on various material states. The role of the ceramic powder treatment by ball milling and electrophoretic deposition (EPD) technique on the determined electric properties as well as basic physical and mechanical properties of (Ba_0.85Ca_0.15) (Zr_0.1Ti_0.9)O₃ ceramics (BCZT) was investigated. It was found that the EPD technologically supported by milling allows obtaining thick and dense deposits (>2 mm). After sintering, the BCZT ceramics with a relative density of >95%, hardness in the range of 2.3–2.9 GPa and piezoelectric coefficients of d₃₃* = 940 pm/V, d_33(E=0) = 427 pm/V and d₃₃ = 364 pC/N can be achieved. Reported results also suggest that indirect (field-dependent) and direct (Berlincourt) measurements of the piezoelectric coefficients can be comparable at optimal poling conditions.     

Sensitivity and performance properties of tex explosives

Abstract

Some sensitivity and performance properties of TEX were studied experimentally and theoretically. The TEX sensitivity to electrostatic spark was determined and tests for transportation were performed. The detonation properties, like the critical diameter, detonation pressure and Gurney energy were determined. Moreover, the detonation velocities of TEX-based cast explosives were compared with those of similar NTO-based ones.     

Organic photovoltaics for low light applications

Here we report on organic photovoltaic's (OPV) suitable for low light applications. In this paper, we illustrate the impact of R_s and R_p for indoor and outdoor applications. In addition, we propose a simple physics approach to predict the behavior of organic solar cells under various illumination intensities through electrical modeling. The combination of simulation and modeling allows to define a set of design rules for OPVs under low light illumination. The performance of various organic solar cells under low light intensity is compared with our predictions and excellent correlation is found. OPV shows high performance under low light conditions.     

Trypsin inhibitor activity of soybean as affected by genotype and fertilisation

The presence of protease inhibitors in soybean prohibits the utilisation of the raw beans for food and feed. However, little information is available about environmental influences and the effects of nitrogen and sulphur supply on the antinutritional constituents of soybean. As these factors may influence protease inhibitors, soybean genotypes segregated according to the presence or absence of the Kunitz trypsin inhibitor have been evaluated for trypsin inhibitor activity (TIA) in field trials. TIA was affected significantly by environment (geographical location), fertilisation treatment and genotype. Environmental means of TIA were between 69.5 and 104.8 mg g^?1. Nitrogen application, which caused an increase in seed protein content, resulted in a reduction in TIA by about 15% as compared with the control. Remarkably, simultaneous application of nitrogen and sulphur in the form of ammonium sulphate had a similar reductive effect on TIA to that of nitrogen application alone, although soybean protease inhibitors are rich in sulphur amino acids. Significant genetic variation in TIA was found both within the genotype class with the Kunitz inhibitor present as well as within the class lacking this inhibitor. The results suggest that TIA of soybean may be modified considerably by genetic improvement and appropriate agronomic management. Copyright © 2003 Society of Chemical Industry     

Comprehensive wellbore stability analysis utilizing Quantitative Risk Assessment

A comprehensive geomechanical approach to wellbore stability requires knowledge of rock strength, pore pressure and the magnitude and orientation of the three principal stresses. These parameters are often uncertain, making confidence in deterministic predictions of the risks associated with instabilities during drilling and production difficult to assess. This paper demonstrates the use of Quantitative Risk Assessment (QRA) to formally account for the uncertainty in each input parameter to assess the probability of achieving a desired degree of wellbore stability at a given mud weight. We also utilize QRA to assess how the uncertainty in each parameter affects the mud weight calculated to maintain stability. In one case study, we illustrate how this approach allows us to compute optimal mud weight windows and casing set points at a deep-water site. In another case study, we demonstrate how to assess the feasibility of underbalanced drilling and open-hole completion of horizontal wells utilizing a comprehensive stability analysis that includes application of QRA.     

Modelling of microbial enhanced oil recovery application using anaerobic gas-producing bacteria

Microbial enhanced oil recovery （MEOR） methods apply injection of bacteria to depleted oil reservoirs to produce oil, which had remained unrecovered after the conventional methods of production. The ability ofthermophilic anaerobic bacteria to produce gas as the main mechanism in potential MEOR in high salinities of 70-100 g/L was investigated in this study. Maximum gas production of up to 350 mL per 700 mL of salty solution was produced at a salinity of 90 g/L stably during 2-4 days of experiment. The experimental results were upscaled to the Snorre Oilfield, Norway, and simulated using ECLIPSE software for 27 months. The best scenarios showed that the increase in oil recovery on average was at 21% and 17.8% respectively. This study demonstrated that anaerobic bacteria used in biogas plants could be an attractive candidate for MEOR implementation due to their ability to withstand high temperature and salinity, and produce gas in large volumes.     

Flexible organic P3HT:PCBM bulk-heterojunction modules with more than 1 year outdoor lifetime

Flexible organic solar cells and modules based on P3ht:PCBM bulk-heterojunctions were fabricated and their lifetime was investigated under laboratory and outdoor conditions. In the laboratory cells were exposed to 1 sun illumination at 65 °C in order to accelerate the degradation. The outdoor behavior of modules was investigated at the Konarka rooftop testing setup in Lowell, MA (USA). We show that these flexible polymer solar cells have a good light stability, passing 1000 h under accelerated light soaking conditions in the laboratory, and that flexible modules survived over 1 year of outdoor exposure without performance losses.     

UV‐Triggered Polymerization,Deposition, and Patterning of Plant Phenolic Compounds

Plant‐derived phenolic compounds, rich in catechol and pyrogallol moieties, can form multifunctional coatings on various substrates following polymerization under mildly alkaline conditions. Despite many appealing features of such coatings, the difficulty to control polymerization of phenolic compounds spatially and temporally limits their number of potential applications. In this study, it is demonstrated that UV irradiation can trigger oxidative polymerization and deposition of plant‐derived phenolic compounds, which opens the possibility to create 2D gradients and patterns of polyphenol coatings and control this polymerization temporally. UV–vis spectroscopy, electrospray ionization mass spectrometry, and cyclic voltammetry analyses are used to investigate the UV‐induced polymerization of several plant‐derived phenolic compounds including pyrogallol, tannic acid, caffeic acid, and gallic acid. Formation of polyphenol coatings on polar and nonpolar substrates after UV irradiation has been studied using water contact angle measurements, atomic force microscopy, time of flight secondary ion mass spectrometry, and X‐ray photoelectron spectroscopy (XPS). The possibility to use UV‐light to accelerate polymerization of phenolic compounds and perform micropatterning can extend the scope of potential applications of the large class of structurally diverse plant‐derived phenolic compounds.