Numerical simulation of heat and mass transfer during the absorption of hydrogen in a magnesium hydride

This paper presents a numerical work aiming at the prediction of the characteristics of an industrial tank filled with hydrides for hydrogen storage. A validation of the method is given and is followed by the resolution of an example which shows the importance of achieving a three-dimensional modelling for the design of an industrial tank. Finally, recent results obtained on a magnesium hydride laboratory tank are given.     

Application of the percolation model to gelation of an epoxy resin

The percolation model has been applied to the study of gelation of the TGDDM-DDS system (tetraglycidyldiaminodiphenylmethane–diaminodiphenylsulfone) at a mass concentration of 100–30. For each temperature the experimental viscosity curves are satisfactorily described by a percolation law. Using the degree of chemical reactions, X, as a variable, a very clear change in the reaction mechanism with temperature can be shown. Then a rate of advancement of effective reactions, Y, is defined. This value only takes intermolecular-type reactions into account, and is probably the only variable on which viscosity depends in a percolation law: η = B(1 ? Y/Y_c)^?p. We obtain Y_c= 0.45 and p= 2.0. Comparing X_c and Y_c at the gel point, we obtain information on the proportion of intramolecular reactions with temperature. It is also demonstrated that the critical percolation threshold agrees closely with the gel point determined experimentally on log G″= f(t) curves.     

Affaiblissements calculés pour des liaisons Terre-satellite en France

The authors apply a method previously described in the litterature to three consecutive decades, for which the rain intensity at Paris was carefully measured. Computations for 12, 18 and 30 GHz show that the variability of rain attenuation among various decades is quite substantial, does not obey any long term trend, and does not depend upon the frequency. Hence, it is possible to propose an evaluation of prediction uncertainties due to random fluctuations of the rain climate in the long term. Next, specific predictions are carried out for various regions in France, and the possible advantages of high altitude receiving site are estimated. They stress the variability of attenuation with location for 12 and 18 GHz : for a given attenuation margin, outage durations vary by a factor one to ten between various French regions.     

Hydrogenation of but-1-yne on platinum catalyst: Role of reversible adsorbed hydrocarbon deposit

By using rectangular pulses of but-1-yne carried by H₂ or H₂-He mixtures over a platinum catalyst, it was possible to visualize the build-up of an adsorbed hydrocarbon deposit which is a necessary condition for getting a selective catalyst (on platinum, but-1-ene selectivity is 90%). Such a deposit is reversibly adsorbed since it desorbs as hydrogenated butyne molecules when the butyne pressure drops at the end of the pulse. Moreover it was shown, during stationary phase, that the sudden fall in the selectivity at high but-1-yne conversion, is due to the desorption of such reversibly adsorbed molecules.     

A Novel Surface Reconstruction and Display Method for Cardiac PET Imaging

Positron emission tomography (PET) allows the in vivo assessment of biochemical activity in humans. The newer PET cameras can create several imaging planes, or slices, through an organ inside the body. The interpretation of two-dimensional (2-D) slices of an organ is often difficult for the clinician since he or she has to form a three-dimensional (3-D) mental composite of the structure of interest. We have developed a set of algorithms to reconstruct a functional three-dimensional surface model of the cardiac left ventricle from a set of two-dimensional cross-sectional image slices generated by PET. The theoretical techniques for this reconstruction method are applicable to most organs provided that the appropriate models for the organs are considered. An automatic boundary detection algorithm outlines the surface of the left ventricle from the 2-D images and assigns intensity values to the surface points whose level is proportional to the local activity. A 3-D surface of the intensity levels, with pseudocolor enhancement, is then displayed with the long axis of the heart in a vertical position. Such a display allows the 3-D myocardial tracer uptake to be clearly visualized by the clinician for better diagnosis.     

Organic contamination of settled house dust, a review for exposure assessment purposes

People spend a considerable amount of time indoors. As a result, exposure to indoor contaminants is of great concern, notably via settled dust ingestion in particular for infants and toddlers. This paper proposes a critical review on the organic contamination of settled house dust and human exposure over the past 10 years and focused on sources, contaminations and measurement methods (sampling, pretreatment, storage and analysis). As many compounds were identified, arises the question of which ones to consider. Sensitive and selective analytical methods for simultaneous determination of targeted substances should be developed and evaluated. Various methods were described for sampling and sample preparation. Harmonization and standardization are needed to enable comparison of results from similar studies. Finally, an integrated multipollutant and multicompartment (settled dust, suspended particles and air) approach appears essential in order to determine the extent of the threat to public health posed by indoor contaminants.     

A review of varietal change in roots,tubers and bananas: consumer preferences and other drivers of adoption and implications for breeding

This review of the literature on varietal change in sub-Saharan Africa looks in detail at adoption of new varieties of bananas in Uganda, cassava in Nigeria, potato in Kenya, sweetpotato in Uganda and yams in Côte d’Ivoire. The review explored three hypotheses about drivers of varietal change. There was a strong confirmation for the hypothesis that insufficient priority given to consumer-preferred traits by breeding programmes contributes to the limited uptake of modern varieties (MVs) and low varietal turnover. Lack of evidence meant the second hypothesis of insufficient attention to understanding and responding to gender differences in consumer preferences for quality and post-harvest traits was unresolved. The evidence on the third hypothesis about the informal seed system contributing to slow uptake of MVs was mixed. In some cases, the informal system has contributed to rapid uptake of MVs, but often it appears to be a barrier with inconsistent varietal naming a major challenge.     

Evaluation of the effect of a novel membrane filtration system on the lifespan of frying oil

Frying oil has a limited lifetime which results in the disposal of approximately 67% of all used oil. The aim of this study is to determine the suitability of different membranes for purifying frying oil and investigate the application of continuous membrane filtration in a commercial deep fryer. Eleven different membranes were tested to assess their suitability for filtrating frying oil. A prototype continuous filtration system with an integrated membrane filter was developed for a deep fryer to assess the effect of continuous membrane filtration on oil degradation. The prototype was subjected to a frying test over 13 days and the results compared to those from a standard deep fryer. The prototype maintained total polar compounds (TPC) at an acceptable level of <12% and the oil remained light in colour even after more than 280 h of use, while TPC in the standard deep fryer rose to >27%.     

Using sequence variants of a QTL region improves the accuracy of genomic evaluation in French Saanen goats

The enhanced availability of sequence data in livestock provides an opportunity for more accurate predictions in routine genomic evaluations. Such evaluations would therefore no longer rely only on the linkage disequilibrium between a chip marker and the causal mutation. The objective of this study was to assess the usefulness of sequence data in Saanen goats (n = 33) to better capture a quantitative trait locus (QTL) on chromosome 19 (CHI19) and improve the accuracy of predictions for 3 milk production traits, 5 type traits, and somatic cell scores. All 1,207 50K genotypes were imputed to the sequence level. Four scenarios, each using a subset of CHI19 imputed variants, were then tested. Sequence-derived information included all CHI19 variants (529,576), all variants in the QTL region (22,269), 178 variants selected in the QTL region and added to an updated chip, or 178 randomly selected variants on CHI19. Two genomic evaluation models were applied: single-step genomic BLUP and weighted single-step genomic BLUP. All scenarios were compared with single-step genomic BLUP using 50K genotypes. Best overall results were obtained using single-step genomic BLUP on 50K genotypes completed with all variants in the QTL region of chromosome 19 (6.2% average increase in accuracy for 9 traits) with the highest accuracy gain for fat yield (17.9%), significant increases for milk (13.7%) and protein yields (12.5%), and type traits associated with CHI19. Despite its association with the QTL region of chromosome 19, the somatic cell score showed decreased accuracy in every alternative scenario. Using all CHI19 variants led to an overall decrease of 4.8% in prediction accuracy. The updated chip was efficient and improved genomic evaluations by 3.1 to 6.4% on average, depending on the scenario. Indeed, information from only a few carefully selected variants increased accuracies for traits of interest when used in a single-step genomic BLUP model. In conclusion, using QTL region variants imputed from sequence data in single-step genomic evaluations represents a promising perspective for such evaluations in dairy goats. Furthermore, using only a limited number of selected variants in QTL regions, as available on SNP chip updates, significantly increases the accuracy for QTL-associated traits without deteriorating the evaluation accuracy for other traits. The latter approach is interesting, as it avoids time-consuming imputation and data formatting processes and provides reliable genotypes.