A Study of the Specific Heats of the Compounds in the Sm_2O_3-BaO-CuO System

By means of X-ray diffraction and adiabatic scanning calorimeter,the specific heatsof five compounds in the Sm_2O_3-BaO--CuO system,such as Sm_2BaO_4,Sm_2CuO_4,BaCuO_4,Sm_2BaCuO_5,SmBa_2Cu_3O_(7-x),from -150℃ to 800℃ have been measured.It is found that the specific heats ofthese compounds increase smoothly with the increase of temperature.     

淀积条件对GDa—SiNx薄膜电学特性的影响

本文讨论了用辉光放电法制备氮化硅薄膜时衬底温度、射频功率和气体流量比对薄膜的电导率、介电常数和击穿强度的影响。通过优化生长条件，制备了优质非晶氮化硅薄膜，其介电常数为７．５、击穿强度为５．５ＭＶ／ｃｍ、电导率为１０－１３（Ωｃｍ）－１。     

煤气设施防腐实践及影响质量因素分析

根据近几年三明钢铁公司煤气设施的防腐实践，就影响煤气设施的质量因素进行了分析。     

固液相变蓄能的数学模型和自然对流换热系数的实验研究

引入自然对流换热系数 ,将固液蓄能数学模型简化为仅用能量方程加以描述。并通过实验测得相变过程的实际温度场 ,证明了自然对流固液相变换热的影响不可忽略 ,验证了固液相变界面移动速率随自然对流换热系数的增大而增大的定性关系     

电容位移法精确测量磁性薄膜的磁致伸缩系数

介绍了一种精确测量磁性薄膜磁致伸缩系数方法－电容位移法，并自行研制组装了一套测量装置，通过误差分析，仪器的精确标定，对稀土－铁超磁致伸缩薄膜的磁致伸缩系数进行了测量，获得满意的结果。     

定向爆破拆除高危烟囱的实践

通过对已产生纵向裂缝、倾斜和基部风化剥蚀严重的高危烟囱的定向（向倾斜相反方向）倒塌爆破实践表明：设计中选用爆破参数及施工措施是有效的。     

电致伸缩陶瓷微位移器非线性的数值方法补偿

本文通过对电致伸缩陶瓷材料的非线性进行分析。找到了补偿电致伸缩陶瓷非线性的数值方法，并对不同回程大小的电滞回线进行了分段处理，使补偿结果更为精确。     

石家庄市CATV系统网络技术指标分配初探

在ＣＡＴＶ系统网络工程设计中，技术指标的分配产关键问题。本文介绍了石家庄市在系统设计时采用的符合实际的设计程序，并对系统前端，传输及用户网各部分技术指标的确定，计算与分配方法，指标的核算等作了较详细地阐述，以供同行参考。     

The inverse mapping and distortion measures for 8-node hexahedral isoparametric elements

The inverse relations of the isoparametric mapping for the 8-node hexahedra are derived by using the theory of geodesics in differential geometry. Such inverse relations assume the form of infinite power series in the element geodesic coordinates, which are shown to be the skew Cartesian coordinates determined by the Jacobian of the mapping evaluated at the origin. By expressing the geodesic coordinates in turn in terms of the isoparametric coordinates, the coefficients in the resulted polynomials are suggested to be the distortion parameters of the element. These distortion parameters can be used to sompletely describe the inverse relations and the determinant of the Jacobian of the mapping. The meanings of them can also be explained geometrically and mathematically. These methods of defining the distortion measures and deriving the inverse relations of the mapping are completely general, and can be applied to any other two-or three-dimensional isoparametric elements.