IMPROVING THE QUALITY OF TIMBER FROM RED BEECH (N. FOSCA) BY INTERMITTENT DRYING

The effect of cycling the external conditions on the timber quality and drying time during seasoning has been studied for red beech (Nothofagus fusca), a difficult-to-dry New Zealand hardwood, inalaboratorybatchdryer. Intermittent drying at anair temperature of 45°C and a wet-bulb depression of 10°C takes longer to yield a given moisture content than continuous drying under the same conditions, but produces timber without honeycomb or severe case-hardening as observed in continuous drying. The experiments also indicate that the timber can tolerate a higher air temperature (55°C) in intermittent drying at the same wet-bulb depression with less case-hardening and without showing honeycomb compared with continuous drying at 45°C, having a similar total drying time. Intermittent drying at a slightly higher dry-bulb temperature (60°C) and a much higher wet-bulb depression (18°C) gives a similar degree of case-hardening to that found in samples dried continuously at a dry-bulb temperature of 45°C.     

Interfacial chemistry and adhesive durability

The improved understanding of adsorption chemistry which has arisen from the development of new surface analytical techniques during the last twenty years has had a major effect on the understanding of catalytic reaction mechanisms. However, there are many other areas of technology where Interfacial chemistry has a determining role but where the understanding is much less developed. In this paper examples are presented of the role of interfacial chemistry in adhesion. In particular, It Is shown that modification of a surface to the extent of just a few atomic layers in depth can have dramatic effects on the performance of adhesive bonds, particularly when exposed to hostile environmental conditions. These examples will be used to highlight a need for greater fundamental understanding of the interfacial chemistry of adhesion and also other technologies where interface effects are dominant.     

The effect of pack-aluminisation on the microstructure of MCrAlY and the performance of thermal barrier coatings

Plasma spraying and pack-aluminising processes were combined and applied to the nickel-base superalloy Mar-M247 to improve its cyclic oxidation resistance. The performance tests of duplex ZrO₂-8 wt.%Y₂O₃/MCrAlY thermal barrier coatings (TBCs) were conducted at 1050 °C, 1075 °C, 1100 °C, 1150 °C and 1200 °C. The results of the experiments in this study showed that TBC specimens with the aluminised MCrAlY bond coat exhibited higher cyclic lives (except for the Ni-22Cr-10Al-1Y bond coat), at all the temperatures tested, than specimens on which the bond coat was not aluminised. The microstructures of the Co-29Cr-6Al-1Y, Co-32Ni-21Cr-8Al-0.5Y and Ni-22Cr-10Al-1Y bond coats with or without aluminising treatment were examined in detail using a scanning electron microscope equipped with an electron probe microanalyzer.     

Energy dissipation via radiative recombination and vibronic relaxation in σ-delocalized silicon backbone network polymers

The nature of ultrafast energy dissipation in poly(n-hexylsilyne), a prototypical σ-delocalized alkysilicon network polymer, is explored. This disordered silicon backbone material exhibits strong near-UV to visible band-edge absorption and a high quantum yield of visible emission. The time evolution of the emission band is studied over four decades of time using time-resolved luminescence as a probe. The data indicate that while there is an ‘intrinsic’ Stokes shift after photoexcitation due to kinetic energy relaxation (<10ps), thermalization within a dense band of vibronic states via intramolecular phonon-assisted hopping on a nanosecond timescale is the dominant mechanism for excited-state decay. The data can be understood in terms of theoretical predictions for energy relaxation in disordered materials.     

Nitrogen plasma source ion implantation of AISI S1 tool steel

Significant economic savings can be achieved by improving the wear lifetime of precision manufacturing tools through nitrogen-ion implantation. This near-ambient temperature, surface modification process preserves dimensional integrity and surface finish while eliminating delamination problems that are often associated with overlay coatings. Conventional ion implantation is a line-of-sight process which requires elaborate manipulation and masking to uniformly implant components of complex shapes. A recently developed process, plasma source ion implantation (PSII), circumvents this line-of-sight restriction and makes ion implantation more attractive economically. In this article, the effects of PSII of nitrogen at a target bias of 50 kV, to a dose of 0.3 × 10¹⁸ atoms/cm² on the surface microstructure and mechanicalproperties of AISI S1 tool steel are presented.     

Unexpected relations between matrix elements of the three-body scalar operators ti in the f shell

It has been known for some time that crystal-field matrix elements (i.e., matrix elements of sums over spherical harmonics involving the coordinates of the individual electrons) are often unexpectedly proportional to one another in the f shell. To see whether similar relations hold for more complicated operators than those provided by the crystal field, we examined the matrix elements of the three-electron scalar operators t_i for all configurations f^N, as calculated by W. T. Carnall on the basis of the computer program of Hannah Crosswhite. These operators are widely used to take configuration interaction into account, and we found a surprising number of proportionalities that go beyond what would be expected on a straightforward application of the Wigner-Eckart theorem, as applied to the irreducible representations of the classic groups SO(7), G₂ and SO(3) used by Racah in defining the f-electron states. A listing of such relations is provided.     

Absorption spectra of solid rare earth complexes obtained from the inner filter effect on luminescence

The inner filter effect is observed in luminescence whenever a second substance is present that has absorptions which overlap the luminescence. This results in a diminution of the luminescence at those wavelengths and is generally observed in solution. In the present communication we show that this effect can be observed when a solid rare earth complex is physically mixed with a solid luminescent organic matrix with which it does not interact. The resulting luminescence is reduced in emission intensity at those wavelengths corresponding to the absorptions of the rare earth ion. This is illustrated with a mixture of Na₃[Ho(ODA)₃] ·2NaClO₄·6H₂O and pyrene at 77 K, and it is shown that the absorption spectrum of the holmium complex can be extracted from the luminescence spectrum of pyrene. This absorption spectrum is in good agreement with that obtained by conventional spectroscopy with a single crystal.     

Surface electronic structure of rare earth metals

Angle-resolved UV photoemission has been used to investigate the electronic structure of the (0001) surfaces of scandium, yttrium, praseodymium and gadolinium. Off-normal emission spectra were recorded with high angular resolution, enabling detailed mapping of the dispersion of valence band features. Yttrium and gadolinium show similar results to published data from Ho(0001), suggesting minimal 4f influence in the lanthanide bandstructures. Differences seen on praseodymium and scandium may be due to 4f derived states and surface states respectively.     

Catalytic behaviour and surface properties of supported lanthana

This paper deals with the role of dispersed lanthana as an active phase in several catalytic reactions: CO hydrogenation, CO oxidation, and oxidative dimerization of methane.

Characterization of the prepared catalysts indicates that lanthana can be effectively dispersed on silica and on ceria. While in the case of silica-supported catalysts lanthana appears at the surface, leading to an almost full coverage for loadings higher than 40%, in the case of ceria-based systems, lanthana forms a solid solution with the support.

In all the reactions studied, the presence of lanthana can be related to significant changes in the catalytic properties of the bare supports. Thus, the selectivity towards the total oxidation products observed on pure ceria is decreased, and the low activity shown by silica is enhanced. For the CO+H₂ reaction, the addition of lanthana also generates upgraded products.     

Schnelle Lochkorrosion durch ungewöhnliche Anodenstabilisierung in einem Stahl/Wasser-System

Fast pitting corrosion in a steel/water system as a result of unusual stabilization of anodes Corrosion damage as a result of fast pitting was observed in industrial equipment made of unalloyed steel. The rate of formation and the manifestation of the pits are similar to pitting corrosion of stainless steels. Estimation of the kinetics of the localized corrosion in terms of differential aeration cells led to a model which indicates the stabilization of small anodic regions. The stabilization was caused by precipitation of the products of reaction between ferrous ions and polymeric silicate. The high rate of pitting also suggests that the oxygen entering the system during service periods involving the exposure of the system to air has enhanced the corrosion. These ideas could be substantiated by experiments, which also revealed particularly the effect of the concentration of NaCl. Anodic passivation by the addition of Na₂CO₃ or perhaps inhibition may be considered as candidate protective measures.