Uniform Polarization Scattering With Fiber-Coil-Based Polarization Controllers

A detailed study of fiber-coil-based polarization controllers (PCs) is performed. First, a method to deterministically calculate the PC configuration in order to transform between any two states of polarization is presented. In a second stage, the case in which the configuration angles are randomly changed is studied. The cases of a single PC and of the system obtained with the concatenation of several PCs are analyzed. For both cases, a general expression for the variance of the Stokes parameters is obtained. Using this expression, it is demonstrated that it is possible to achieve uniform polarization scattering using a concatenation of fiber-coil-based PCs. Finally, it is shown that fiber-coil-based PCs can be used to emulate both first- and second-order polarization-mode dispersions     

Homogenization of hardness distribution and distortion in high pressure gas quenching

Quenching with gases rather than oil or other liquid media has the advantages of reducing the risks concerning health and environment, while simultaneously homogenizing the quenching results and minimizing distortion due to a wide range of possible process parameter variations and the pure convective heat transfer. In this contribution, a coupled solution for increasing homogenization of quenching results within high pressure gas quenching will be presented. In the first stage, an experimental test facility was set up for flow investigations and in the second stage a numerical simulation model was generated. The numerical and experimental results of the flow through the chamber were compared for several boundary conditions. Finally, after complete verification of the simulation, the model may be used to assist in parameter variation for optimization of homogeneous high pressure gas quenching.     

Electrode Potential Thermodynamics

A problem of determining the electrode potential by substituting the chemical potentials of electrons in metals of the electrochemical circuit into the expression for the chemical affinity of the reaction taking place in a galvanic cell is solved.     

Higher bit rates for dispersion-managed soliton communication systems via constrained coding

Constrained coding as a method to increase the data rate in dispersion-managed soliton (DMS) communication systems is proposed. This approach is well known and widely used in the context of magnetic and optical recording systems. This paper shows that it is also applicable to DMS systems due to certain similarities between the underlying physical channels. Since timing jitter is an important error-generating mechanism for solitons, a coding scheme specifically designed to combat pulse shifts is also presented, and its properties in the framework of a particular information-theoretic channel model are analyzed. A connection between the model used and the real physical channel is then established. Next, the coded system is compared with the original one from the channel capacity point of view with the help of numerical examples. Finally, the fact that the application of constrained coding may alleviate soliton pulse-to-pulse interaction is exploited. This, in turn, opens the door to the usage of higher-than-usual map strengths and ultimately leads to a significant increase of up to 50% in the bit rate.     

Kinetics of AuSn4 migration in lead-free solders

The relatively fast diffusion of Au atoms in eutectic PbSn matrix is considered one of the contributing factors to the Au embrittlement problem. In this study, we further investigated the Au embrittlement problem in high-Sn solders. Experimentally, Sn3.5Ag (wt.%) spheres with 500-μm diameter were soldered over the Au/Ni soldering pads. It was found that some of the AuSn₄ needles that formed after reflow inside the solder migrated back to the solder/pad interface during thermal aging. However, the migration kinetics in high-Sn solders was slower compared to that in eutectic PbSn. The difference in migration kinetics of AuSn₄ in eutectic PbSn and SnAg was ascribed to the difference in the magnitudes of the Au flux and the Ni flux. In eutectic PbSn, the Au flux was much greater than that of the Ni flux, and the Au and Ni flux were in the same order of magnitude in eutectic SnAg. The relative magnitude of the Au and Ni flux changed in eutectic PbSn and SnAg because the homologous temperatures of PbSn and SnAg were different.     

Functional characteristics of Bi2Sr2Ca2Cu3O10 + δ/ZrN composites

We present the results of investigation of the magnetic, transport, structural, and mechanical properties of composites obtained by introducing finely dispersed zirconium nitride into a matrix of a Bi₂Sr₂Ca₂Cu₃O_{10 + δ} (Bi2223) high-temperature superconductor. It is established that the introduction of ZrN particles in the range of very small concentrations (0.1–0.3 wt %) leads to a significant (more than threefold) increase in the critical current density of Bi2223 and increases the density of the composite, while the microhardness of the superconducting phase remains unchanged.     

Optical storage on a dielectric ternary crystal doped with europium

In this work we study the thermoluminescent properties of europium doped KCl_0.5KBr_0.25RbBr_0.25 under β-radiation exposure. The glow curve shows light emissions for two temperature regions around 140 and 332 °C, which increase with the time of exposure, in both regions. Light emission of the second region increases linearly with the time. In each region there is a very small fading, showing that this crystal has high capacity to store optical energy.     

Characteristics of particle-associated PAHs in a first flush of a highway runoff.

Runoff monitoring of six rainfall events was carried out in a highway, Winterthur, Switzerland focusing on first flush (runoff volume up to 2.88 mm). Six runoff events were used to investigate the characteristics of particle-associated PAHs in first flush. The fine fraction (< 45 microm) had a relatively higher contribution than the coarse fraction. A significant contribution of the coarse fraction was observed at some periods when the runoff flow rapidly increased. Fluctuation of PAH content during a runoff event was significant in the coarse fraction and, in contrast, the PAH content in the fine fraction was less fluctuating. The weighted average PAH content in each event ranged from 17 to 62 microg/g in total SS, from 23 to 54 microg/g in the fine fraction and from 16 to 84 microg/g in the coarse fraction. The loading of particle-associated PAHs from the first flush of highway runoff ranged from 0.06 to 0.22 g/ha in a total of 12 PAH species.     

Yielding- and fracture behaviour of ferritic steels in the transition region of quasistatic to dynamic loading

This paper presents results of investigations on the influence of loading rate on yielding and fracture behaviour of ferritic steels. The range of loading rates was below a certain level at which a special stress wave analysis is required. Concerning the yielding behaviour it was found, that the yield strength can be predicted by the model of thermally activated flow. The strain hardening dσ/dε appeared to be independent of strain rate, if adiabetic heating can be neglected. Concerning the fracture behaviour it is demonstrated that the K_lc-T-curves are shifted to higher temperatures with increasing loading rate. The temperature shift could be correlated with the strain rate sensitivity m = d lnσ/d lnε. The ductile/brittle transition temperature increases with incrasing loading rate. For the upper shelf region crack resistance curves as a function of loading rate are presented. It is shown that the crack length can be determined using the key-curve-method. A slightly increasing tendency of the evaluated J_R-curves was found.