Differences in microbial activity of digesta from three sections of the porcine large intestine according to in vitro fermentation of carbohydrate‐rich substrates

To determine whether faecal microorganisms can represent the entire large intestinal population, samples from caecum, mid‐colon and rectum of three adult pigs were used for the in vitro fermentation of fructo‐oligosaccharide (FOS), potato starch, wheat bran and oat hulls. The cumulative gas production technique measured fermentation kinetics and end‐products such as total gas, NH₃ and volatile fatty acids (VFA). There were significant differences in the fermentability of substrates, in terms of both kinetics and end‐products. More relevant to this study, there were also differences between pigs in respect of total gas production, the rate of gas production (R_M) and VFA production. For large intestine sections, there were more VFA from mid‐colon and rectal inocula compared with that from the caecum (p < 0.0001). Total gas, R_M and NH₃ were highest for rectal, intermediate for mid‐colon and lowest for caecal inocula (p < 0.0001). It was concluded that, while faecal sampling might overestimate caecal fermentation, its use is valid for in vitro assessment of large intestinal fermentation. However, differences between pigs indicate that a mix of samples from several animals remains important. Copyright © 2004 Society of Chemical Industry     

Carbon Dioxide Evolution and Moisture Evaporation During Roasting of Coffee Beans

ABSTRACT: Evolution of carbon dioxide and water vapor during roasting of coffee was followed in an isothermal high-temperature short-time and a low-temperature long-time roasting process. In addition, CO₂ release during storage of roasted beans was followed. CO₂ and water vapor concentration were assayed in the exhaust air by nondispersive infrared gas analysis. Although CO₂ evolution rates differed in the 2 processes, the final total amount of CO₂ released after 63 d of storage remained equal. CO₂ evolution and differentiation between evaporation of initial water and chemically formed water showed that chemical reactions leading to relevant amounts of CO₂ and water start at ap -proximately 180°C. A mass balance established on the present measurements was able to account fairly well for the gravimetrically measured roast loss.     

Peculiarities of Phase Transitions and Structure Formation in a Ternary Al-Cu-Ni Alloy with Four-Phase Peritectic Reaction

The structure formation in peritectic Al-4.5at.%Cu-11at.%Ni ternary alloy with four-phase peritectic reaction was investigated using the quantitative phase-field model of eutectic growth. This model, extended to an arbitrary number of phases, guarantees the stability requirements on individual interfaces. The thermal noise terms disturb the stability and produce the heterogeneous nucleation of secondary phases in accordance to the energetic and concentration conditions. In our recent work it was shown that in differential thermal analysis (DTA) experiments specific microstructure parts in Al-4.5at.%Cu-11at.%Ni alloy with a four-phase peritectic reaction were observed, which cannot be explained by Scheil calculation or simple phase-field modeling. In this work, it was found by numerical experiments that, due to the formation of anisotropic quasi-primary Al₃Ni₂ crystals and the suppression of the nucleation of (Al) phase, the eutectic-like coupled growth of Al₃Ni₂ and Al₃Ni phases can be observed. In addition, at further cooling the anisotropic shape of quasi-secondary Al₃Ni crystals promotes the nucleation of the (Al) phase. The simulated final structure is comparable to the experimental one which is characterized by large Al₃Ni₂ crystals enveloped by the Al₃Ni phase.     

Moving Bed Heat Exchangers for Use With Heat Storage in Concentrating Solar Plants: A Multiphase Model

Heat storage based on particulate materials is a promising option to provide a demand-oriented electricity production with utility-scale solar power plants. For energy storage discharge, a moving bed heat exchanger is considered and its design is investigated. As a basis for a flexible design tool, a multiphase model based on the Eulerian continuum approach was set up to describe the bulk flow and the thermal performance. The model was applied to an example heat exchanger layout, and the simulation results were compared with an empirical model, confirming the validity of the approach. Initial parameter variations identify the key parameters and their effect on the thermal performance.     

APPLICATION OF CONCENTRATED SOLAR RADIATION TO HIGH TEMPERATURE DETOXIFICATION AND RECYCLING PROCESSES OF HAZARDOUS WASTES

In many cases, hazardous wastes are subject to thermal treatment at elevated temperatures. Some types of wastes do not have a sufficient calorific value to cover the heat demand of the high temperature process. For thermal treatment of e.g. filter residues, dusts, sulfuric acid, aluminium dross, foundry sand, or waste water, supplementary energy supply is needed. The specific energy demand ranges from 0.5 to 2.5 kWh/kg (2–10 MJ/kg). An important aim of process optimisation is the reduction of (fossil) energy consumption and exhaust gas flow. Concentrated solar energy promises advantages when applied to high energy consuming waste treatment processes with regard to substitute fossil or electric energy consumption, to reduce CO₂ emissions, and exhaust gas flow. In parallel to conceptional studies, a solar-heated rotary kiln mini-plant has been designed and constructed for tests in the DLR solar furnace. The tests will give indications of boundary conditions for solar thermal treatment or conversion of selected hazardous materials.     

LIQHYSMES storage unit – Hybrid energy storage concept combining liquefied hydrogen with Superconducting Magnetic Energy Storage

A new energy storage concept for variable renewable energy, LIQHYSMES, has been proposed which combines the use of LIQuid HYdrogen (LH2) with Superconducting Magnetic Energy Storage (SMES). LH2 with its high volumetric energy density and, compared with compressed hydrogen, increased operational safety is a prime energy carrier for large scale stationary energy storage. But balancing load or supply fluctuations from seconds to several hours with hydrogen alone is difficult due to the response times of the flow control, and an additional short-term electrical energy storage will be needed. For this purpose a compact LIQHYSMES Storage Unit is proposed which integrates the H2 liquefaction part, the LH2 tank and the SMES based on Magnesium Diboride and cooled by the LH2 bath. This allows jointly utilizing the cryogenic infrastructure and reducing the otherwise significant H2 liquefaction losses by introducing a novel process with “cold recovery”. Preliminary target numbers for this process, key parameters for a complete LIQHYSMES model plant, simulations on the anticipated buffering behaviour, a loss analysis and a crude cost estimate are given.     

A Heuristic Search for Identifying Required Application Libraries Supporting a Run-Time Security Policy

On a Windows platform it is possible to inject a DLL into a running process creating a new thread of execution within an authorized process. Security tools monitoring or examining DLLs loaded into the memory space of a given process rely on policies to determine the validity of the library. Two approaches to the policy specification include “all or nothing” and “per executable” rules also referred to as a run-time security policy. Developing the run-time policy requires the running of every executable for a period of time to train the system. An alternative to the training method of the run-time approach is to determine ahead of time which DLL should be loaded before execution. A tool called LibMon was developed to monitor loading of libraries by running applications. A heuristic search algorithm was created based on the analysis of the data collected with LibMon.