Pervaporation of chlorinated hydrocarbon-acetone mixtures through poly(ethylene-co-vinyl acetate) membranes

Crosslinked and uncrosslinked ethylene-vinyl acetate copolymer membranes were prepared. The permeation characteristics in the pervaporation process were examined using carbon tetrachloride-acetone mixtures. Modified membranes exhibit carbon tetrachloride permselectivity, but unmodified membranes did not display the permselectivity of crosslinked polymer. Furthermore, membranes modified with dicumyl peroxide (DCP) showed a higher flux and selectivity than those of benzoyl peroxide (BP) modified ones. The effects of feed concentration, molecular size, and polarity of the permeating species on pervaporation were analyzed. The influence of crosslinking density of the membranes on pervaporation was also analyzed. The maximum separation and flux were found to be associated with an optimum amount of crosslinking agent in the membrane. A mixture of chloroform and acetone having a composition near the azeotropic region was also separated by the pervaporation technique. © 1996 John Wiley & Sons, Inc.     

Cure synergism in XNBR vulcanization in presence of thiophosphoryl disulfides and amine disulfide/thiazole accelerators

The study deals with the vulcanization of carboxylated nitrile butadiene rubber (XNBR) having synergistic combinations of accelerators comprising thiophosphoryl disulfide as one of the components. Other constituent accelerators employed in the present investigation are 2-mercaptobenzothiazole (MBT), 2-mercaptobenzothiazyl disulfide (MBTS), bis(N-oxydiethylene)disulfide (ODDS), N-oxydiethylene 2-benzothiazole sulfenamide (OBTS), etc. The binary combinations of thiophosphoryl disulfides with OBTS exhibited the highest mutual activity in the respective areas, so far as the physical properties are concerned. Structural characterization of different thiophosphoryl disulfide-accelerated XNBR vulcanizates, including those formed from the synergistic combinations with OBTS, were studied using a methyl iodide probe. It was found that the amount of sulfidic crosslinks arising from the reaction between  COOH groups of XNBR and thiophosphoryl disulfides, actually controls the network structure as wellas the physical properties of the vulcanizates. © 1996 John Wiley & Sons, Inc.     

A simple technique for grafting poly(methyl methacrylate) onto glass fabric

We have developed a two-step technique for synthesizing dichlorosuccinyl peroxide at room temperature, starting from succinic anhydride. It reacts with silanated glass fabric or beads at room temperature. The macroinitiator thus formed can be used for the polymerization of methyl methacrylate, MMA. We show that the MMA is grafted to the surface of glass giving a chemically bonded ultrathin coating, as confirmed by the FTIR analysis and electron micrography.     

Facilitating GL13K Peptide Grafting on Polyetheretherketone via 1-Ethyl-3-(3-dimethylaminopropyl)carbodiimide: Surface Properties and Antibacterial Activity

In the present work, the antimicrobial peptide (AMP) of GL13K was successfully coated onto a polyetheretherketone (PEEK) substrate to investigate its antibacterial activities against Staphylococcus aureus (S. aureus) bacteria. To improve the coating efficiency, 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide (EDC) was mixed with a GL13K solution and coated on the PEEK surface for comparison. Both energy-dispersive X-ray spectroscopy (EDX) and X-ray photoelectron spectroscopy (XPS) data confirmed 30% greater peptide coating on PEEK/GL13K-EDC than PEEK without EDC treatment. The GL13K graft levels are depicted in the micrograms per square centimeter range. The PEEK/GL13K-EDC sample showed a smoother and lower roughness (Rq of 0.530 µm) than the PEEK/GL13K (0.634 µm) and PEEK (0.697 µm) samples. The surface of the PEEK/GL13K-EDC was more hydrophilic (with a water contact angle of 24°) than the PEEK/GL13K (40°) and pure PEEK (89°) samples. The pure PEEK disc did not exhibit any inhibition zone against S. aureus. After peptide coating, the samples demonstrated significant zones of inhibition: 28 mm and 25 mm for the PEEK/GL13K-EDC and PEEK/GL13K samples, respectively. The bacteria-challenged PEEK sample showed numerous bacteria clusters, whereas PEEK/GL13K contained a little bacteria and PEEK/GL13K-EDC had no bacterial attachment. The results confirm that the GL13K peptide coating was able to induce antibacterial and biofilm-inhibitory effects. To the best of our knowledge, this is the first report of successful GL13K peptide grafting on a PEEK substrate via EDC coupling. The present work illustrates a facile and promising coating technique for a polymeric surface to provide bactericidal activity and biofilm resistance to medical implantable devices.     

Loss of SDHB Induces a Metabolic Switch in the hPheo1 Cell Line toward Enhanced OXPHOS

Background: Enzymes of tricarboxylic acid (TCA) have recently been recognized as tumor suppressors. Mutations in the SDHB subunit of succinate dehydrogenase (SDH) cause pheochromocytomas and paragangliomas (PCCs/PGLs) and predispose patients to malignant disease with poor prognosis. Methods: Using the human pheochromocytoma cell line (hPheo1), we knocked down SDHB gene expression using CRISPR-cas9 technology. Results: Microarray gene expression analysis showed that >500 differentially expressed gene targets, about 54%, were upregulated in response to SDHB knock down. Notably, genes involved in glycolysis, hypoxia, cell proliferation, and cell differentiation were up regulated, whereas genes involved in oxidative phosphorylation (OXPHOS) were downregulated. In vitro studies show that hPheo1 proliferation is not affected negatively and the cells that survive by shifting their metabolism to the use of glutamine as an alternative energy source and promote OXPHOS activity. Knock down of SDHB expression results in a significant increase in GLUD1 expression in hPheo1 cells cultured as monolayer or as 3D culture. Analysis of TCGA data confirms the enhancement of GLUD1 in SDHB mutated/low expressed PCCs/PGLs. Conclusions: Our data suggest that the downregulation of SDHB in PCCs/PGLs results in increased GLUD1 expression and may represent a potential biomarker and therapeutic target in SDHB mutated tumors and SDHB loss of activity-dependent diseases.     

Pd-Decorated Tungsten as Pt-Free Bimetallic Catalysts for Hydrogen Oxidation Reaction in Alkaline Electrolyte

Developing Pt-free catalysts for hydrogen oxidation reaction (HOR) in alkaline solution is becoming a key challenge in the development of anion exchange membrane fuel cells and electrochemical reactors. Herein, we present the preparation, HOR activity, and stability of Pd-decorated tungsten (Pd-d-W) catalysts. The Pd-d-W catalysts were prepared by the chemically activated surface of tungsten nanoparticles by Pd ions. The resultant bimetallic catalysts consisted of crystalline phases of both Pd and W nanoparticles. The CO stripping voltammograms and H-desorption (H_des) peak potential of hydrogen desorption in Pd suggests that the enhancement of HOR catalytic activity observed in Pd-d-W catalyst can be ascribed to the modification of electronic property of Pd and availability of OH_ad near-surface Pd atoms.     

Friction and wear characteristics of organic thiophosphoro derivatives — a critical appraisal

The friction- and wear-reducing characteristics of a number of oil soluble sulphurised and phosphosulphurised derivatives for automotive and industrial applications have been reviewed. A critical appraisal of the suggested causes and mechanism of friction reduction and antiwear characteristics has been made. A review of the investigations carried out so far indicates that the creation of in situ films of simple inorganic salts, such as molybdenum disulphide, iron sulphide or phosphates of low shear strength and lamellar structures, does not appear to be the primary cause of low friction and wear. The authors have, therefore, undertaken a programme to synthesise and study the chemistry and tribochemical reactions in relation to friction and wear characteristics of hydrocarbon-soluble thiophosphoro derivatives of alkyl phenol, alcohols and fatty esters, in order to establish relationships between the reactivity, chemical nature and crystal structure of films formed on rubbing surfaces, and antifriction and antiwear characteristics. Molybdenum salts of various phosphorothio derivatives of pentadecylphenol and lauryl oleate of specific structures have been synthesised, and the friction and wear properties of their blends in mineral oil base stock have been studied. It can be clearly inferred from the results that type of bonding between sulphur, phosphorus and molybdenum, and reactivity of these derivatives with rubbing surfaces, determine their friction-reducing and antiwear characteristics. Their reactivity with iron and the nature of films formed are under investigation.     

Total Electron Detachment and Induced Cationic Fragmentation Cross Sections for Superoxide Anion (O2−) Collisions with Benzene (C6H6) Molecules

In this study, novel experimental total electron detachment cross sections for O₂⁻ collisions with benzene molecules are reported for the impact energy range (10–1000 eV), as measured with a transmission beam apparatus. By analysing the positively charged species produced during the collision events, relative total ionisation cross sections were derived in the incident energy range of 160–900 eV. Relative partial ionisation cross sections for fragments with m/z ≤ 78 u were also given in this energy range. We also confirmed that heavier compounds (m/z > 78 u) formed for impact energies between 550 and 800 eV. In order to further our knowledge about the collision dynamics governing the fragmentation of such heavier molecular compounds, we performed molecular dynamics calculations within the framework of the Density Functional Theory (DFT). These results demonstrated that the fragmentation of these heavier compounds strongly supports the experimental evidence of m/z = 39–42, 50, 60 (u) cations formation, which contributed to the broad local maximum in the total ionisation observed from 550 to 800 eV. This work reveals the reactivity induced by molecular anions colliding with hydrocarbons at high energies, processes that can take place in the interstellar medium under various local conditions.     

Resolving Deep Sub-Wavelength Scattering of Nanoscale Sidewalls Using Parametric Microscopy

The quantitative optical measurement of deep sub-wavelength features with sub-nanometer sensitivity addresses the measurement challenge in the semiconductor fabrication process. Optical scatterings from the sidewalls of patterned devices reveal abundant structural and material information. We demonstrated a parametric indirect microscopic imaging (PIMI) technique that enables recovery of the profile of wavelength-scale objects with deep sub-wavelength resolution, based on measuring and filtering the variations of far-field scattering intensities when the illumination was modulated. The finite-difference time-domain (FDTD) numerical simulation was performed, and the experimental results were compared with atomic force microscopic (AFM) images to verify the resolution improvement achieved with PIMI. This work may provide a new approach to exploring the detailed structure and material properties of sidewalls and edges in semiconductor-patterned devices with enhanced contrast and resolution, compared with using the conventional optical microscopy, while retaining its advantage of a wide field of view and relatively low cost.