Microstructure of the HMX‐Based PBX KS32 after Mechanical Loading

Non‐destructive X‐ray diffraction techniques were applied in order to monitor the influence of mechanical and shock‐loading on the microstructure of the plastic‐bonded high explosive KS32. The investigations uncovered damage to embedded coarse HMX crystals and to the binder system HTPB‐IPDI. Damage to the crystals occurred already during the kneading process in terms of deformation twinning. On higher loading between 400 MPa (static) and 480 MPa (dynamic) also crystal fracture was observed. The change in the binder structure was found after both static and dynamic loading, but not in the cured, differently kneaded samples. Moreover, the change in binder structure after dynamic loading was verified by dynamic mechanical analysis, and interpreted as a partial damage of the binder rubber shell around the explosive particles. The results are compared to literature data from imaging techniques.     

Efficient Engineering and Production Concepts for Products in Regulated Environments – Dream or Nightmare?

Manufacturing of chemical‐pharmaceutical products is moving increasingly fast on a global scale. Therefore, developing and starting up production facilities fast, with high quality, and at reasonable costs has become extremely challenging. Engineering concepts like modularization, standardization and simultaneous/parallel engineering are discussed as methods for speeding up process design and filing for regulatory approval. Transfer from batch to continuous operation mode of production is pointed out as the key‐issue in such strategies.     

iFlash:80℃活化漂白与新型皂洗

加工技术与设备的发展通常会使加工时间缩短.但是新型助剂的应用也可减少加工时间,大大降低成本.随着iFlash系统的应用,漂白温度可降至80℃,活性染料染色后皂洗的时间也大大缩短.因此,织物间歇式染色得到优化,在不增加额外投资的情况下运行更经济.     

Herstellung von Phenolharzen unter Verwendung von Stärkeprodukten

Usage of Starchy Products for Preparation of Phenolic Resins. Incorporation of starches and starch hydrolysates in phenolic resins of novolak and resol type has been investigated via acid catalyzed dehydration to 5-hydroxymethylfurfural (HMF) in the presence of phenol and formaldehyde. Due to formation of HMF/phenol-condensates savings up to 40% phenol and 65% formaldehyde are possible in comparison to commercial resins. Besides very low amounts of residual monomers, curing is accelerated with increased carbohydrate incorporation, which can be used to reduce time consuming manufacturing processes. Especially starch hydrolysates with different average molecular weights can be used in a very flexible way to achieve special requirements like softening points, mol weight distributions, viscosities and curing behaviour.     

Multi-scale mechanistic modelling of the host defence in invasive aspergillosis reveals leucocyte activation and iron acquisition as drivers of infection outcome

Aspergillus species are ubiquitous environmental moulds, with spores inhaled daily by most humans. Immunocompromised hosts can develop an invasive infection resulting in high mortality. There is, therefore, a pressing need for host-centric therapeutics for this infection. To address it, we created a multi-scale computational model of the infection, focused on its interaction with the innate immune system and iron, a critical nutrient for the pathogen. The model, parameterized using published data, was found to recapitulate a wide range of biological features and was experimentally validated in vivo. Conidial swelling was identified as critical in fungal strains with high growth, whereas the siderophore secretion rate seems to be an essential prerequisite for the establishment of the infection in low-growth strains. In immunocompetent hosts, high growth, high swelling probability and impaired leucocyte activation lead to a high conidial germination rate. Similarly, in neutropenic hosts, high fungal growth was achieved through synergy between high growth rate, high swelling probability, slow leucocyte activation and high siderophore secretion. In summary, the model reveals a small set of parameters related to fungal growth, iron acquisition and leucocyte activation as critical determinants of the fate of the infection.     

Contribution of the Internal and External Oxygen to the Oxidation of Microencapsulated Fish Oil

Microencapsulation aims to protect polyunsaturated fatty acids against oxidation by embedding oil droplets in a solid matrix. In such a system the internal (dissolved and entrapped) and external (in the environment) oxygen can be differentiated. The study aims to quantify the impact of both oxygen sources on the oxidation of microencapsulated fish oil. The impact of the solubilized oxygen in bulk fish oil is investigated by saturating the oil with nitrogen, synthetic air, and pure oxygen. Even though more dissolved oxygen results in more oxidation products, the difference between the oxidation of the nitrogen and air saturated oil is significant but low. For encapsulated fish oil powders, the internal oxygen is modified by preparing oil‐in‐water emulsions under atmospheric and inert conditions. The feed is atomized and spray dried with either nitrogen or air. Powders are stored under vacuum and in vials and the hydroperoxides and anisidine value are determined in the total‐ and encapsulated oil. The internal oxygen has a minor impact, whereas the external oxygen is the main determinant for autoxidation. Apart from oxidizing the non‐encapsulated oil, the external O₂ penetrates into the particle and reacts with the encapsulated oil. Practical Applications: Comparing the contribution of the internal and external oxygen to the oxidative stability shows that the internal O₂ plays a minor role and can be neglected. This means that the emulsion preparation as well as the spray drying process can be conducted under ambient conditions. An inert production is not extending the shelf life significantly as long as the external O₂ determines oxidation. The focus should be on optimizing the diffusion barrier properties of the wall matrix to reduce the penetration of the external oxygen into the particle system. Alternatively, packaging solution reducing the external O₂ will extend the shelf life of the microencapsulated oil.     

Mineral Oil Hydrocarbons (MOSH/MOAH) in Edible Oils and Possible Minimization by Deodorization Through the Example of Cocoa Butter

Mineral oil hydrocarbons (MOH) are present in many fats and oils as well as foods prepared thereof. A survey of mineral oil saturated hydrocarbons (MOSH) and mineral oil aromatic hydrocarbons (MOAH) in different types of vegetable fats and oils is reported. Contents of MOSH/MOAH were quantified using liquid chromatography online‐coupled to gas chromatography with flame‐ionization detection (LC‐GC‐FID). Cocoa butter (n = 142) showed levels from <LOQ (2.5 mg kg^?1) to 162 mg kg^?1 ΣMOSH (sum of C10–C50) and <LOQ to 55 mg kg^?1 ΣMOAH, in palm oil (n = 21) ΣMOSH were quantified from <LOQ to 124 mg kg^?1 and ΣMOAH from <LOQ to 39 mg kg^?1. Sunflower oil showed lower levels: ΣMOSH were determined in the range of <LOQ to 17 mg kg^?1 and MOAH were not observed at all. A possible influence of deodorization and a subsequent minimization of MOSH/MOAH was investigated. Systematic model‐experiments were performed on laboratory scale using spiked cocoa butter. Significant minimization of volatile MOH subfractions ≤C24 were observed at a deodorization temperature of 210 °C. Deodorization can be considered as an important processing step to reduce or even remove volatile MOSH/MOAH ≤C24. Practical Applications: Regardless of their possible entry routes into the food chain, volatile fractions of MOSH/MOAH can be removed by deodorizing vegetable fats and oils. This model‐study identifies the temperatures of deodorization that provide a significant improvement toward minimization of undesired MOSH/MOAH.     

Identification of BaO. A12O3.5TiO2 in the Ternary System BaO. A12O3-TiO2

A new identification and indexing for the phase BaAl₂Ti₅O₁₄ were accomplished using an X-ray diffraction technique. The new lattice parameters for the tetragonal lattice structure are: a₀=9.990 × 10^-10 m and c₀=12.264 × 10^-10 m, with a corresponding volume 1.224 × 10^-27 m³. The data provided by the Joint Committee on Powder Diffraction Standards are inconsistent both in lattice parameter values and Miller indices. The X-ray powder diffraction pattern of BaAl₂Ti₅O₁₄ was indexed using the LSUCR (least-squares unit cell refinement) computer program.     

Surface Composition of Myrmecophilic Plants: Cuticular Wax and Glandular Trichomes on Leaves of <Emphasis Type="Italic">Macaranga tanarius</Emphasis>

Primary plant surfaces, covered with cuticles consisting of cutin and waxes, are important substrates for interaction with insects. The composition of leaf surfaces of the myrmecophilic plant Macaranga tanarius was studied. The prenylated flavanone nymphaeol-C was identified in surface extracts and was localized exclusively in glandular trichomes on the abaxial leaf side. The epidermal pavement cells surrounding these trichomes were covered with a smooth film of epicuticular wax from which few small wax crystals protruded. The epicuticular wax amounted to approximately 8 μg cm⁻², corresponding to 85% of the wax load on the adaxial as well as the abaxial leaf sides. The epicuticular wax mixtures from both leaf surfaces contained more than 70% primary alcohols, 14% fatty acids, 2% aldehydes, and traces of alkyl acetates, with chain lengths ranging from C₂₀ to C₃₈. In contrast, the intracuticular wax layer was largely dominated by triterpenoid alcohols α-amyrin, β-amyrin, and lupeol. Consequently, these characteristic compounds are not available for direct contact with insects on the plant surface.