Gallium gradients in Cu(In,Ga)Se2 thin‐film solar cells

The gallium gradient in Cu(In,Ga)Se₂ (CIGS) layers, which forms during the two industrially relevant deposition routes, the sequential and co‐evaporation processes, plays a key role in the device performance of CIGS thin‐film modules. In this contribution, we present a comprehensive study on the formation, nature, and consequences of gallium gradients in CIGS solar cells. The formation of gallium gradients is analyzed in real time during a rapid selenization process by in situ X‐ray measurements. In addition, the gallium grading of a CIGS layer grown with an in‐line co‐evaporation process is analyzed by means of depth profiling with mass spectrometry. This gallium gradient of a real solar cell served as input data for device simulations. Depth‐dependent occurrence of lateral inhomogeneities on the µm scale in CIGS deposited by the co‐evaporation process was investigated by highly spatially resolved luminescence measurements on etched CIGS samples, which revealed a dependence of the optical bandgap, the quasi‐Fermi level splitting, transition levels, and the vertical gallium gradient. Transmission electron microscopy analyses of CIGS cross‐sections point to a difference in gallium content in the near surface region of neighboring grains. Migration barriers for a copper‐vacancy‐mediated indium and gallium diffusion in CuInSe₂ and CuGaSe₂ were calculated using density functional theory. The migration barrier for the In_Cu antisite in CuGaSe₂ is significantly lower compared with the Ga_Cu antisite in CuInSe₂, which is in accordance with the experimentally observed Ga gradients in CIGS layers grown by co‐evaporation and selenization processes. Copyright © 2014 John Wiley & Sons, Ltd.     

Interrelations between initial pore structure, morphology and distribution of accumulated deposits, and lifetimes of hydrodemetallisation catalysts

The functioning of commercial HDM catalysts, experiencing conditions of industrial use in residual feedstocks upgrading reactors is analysed, in order to derive the essential physical and chemical processes that determine their deactivation. A mathematical model of this evolution is presented as an attempt to integrate this analysis into computer simulations for improved reliability of lifetimes predictions. A method to obtain accelerated aging data on HDM catalysts at the bench scale is presented, with examples of results. A method is given to combine such results with EPMA analysis of used catalyst pellets in order to determine the Ultimate Storage Capacity intrinsic to the catalyst's pore structure. Selected results of an High Resolution Electron Microscopy study of microtome thin foiled used HDM catalyst pellets are presented: they show for the first time the nature, morphology and structure of metal sulfides deposits at the micropore level, and support the “discrete” mode of deposition theory. Model predictions and experimental deactivation results are compared, and the limitations of the model discussed. Unsolved questions are listed for future research.     

Sensitivity of photon-counting based K-edge imaging in X-ray computed tomography

The feasibility of K-edge imaging using energy-resolved, photon-counting transmission measurements in X-ray computed tomography (CT) has been demonstrated by simulations and experiments. The method is based on probing the discontinuities of the attenuation coefficient of heavy elements above and below the K-edge energy by using energy-sensitive, photon counting X-ray detectors. In this paper, we investigate the dependence of the sensitivity of K-edge imaging on the atomic number Z of the contrast material, on the object diameter D , on the spectral response of the X-ray detector and on the X-ray tube voltage. We assume a photon-counting detector equipped with six adjustable energy thresholds. Physical effects leading to a degradation of the energy resolution of the detector are taken into account using the concept of a spectral response function R(E,U) for which we assume four different models. As a validation of our analytical considerations and in order to investigate the influence of elliptically shaped phantoms, we provide CT simulations of an anthropomorphic Forbild-Abdomen phantom containing a gold-contrast agent. The dependence on the values of the energy thresholds is taken into account by optimizing the achievable signal-to-noise ratios (SNR) with respect to the threshold values. We find that for a given X-ray spectrum and object size the SNR in the heavy element's basis material image peaks for a certain atomic number Z. The dependence of the SNR in the high- Z basis-material image on the object diameter is the natural, exponential decrease with particularly deteriorating effects in the case where the attenuation from the object itself causes a total signal loss below the K-edge. The influence of the energy-response of the detector is very important. We observed that the optimal SNR values obtained with an ideal detector and with a CdTe pixel detector whose response, showing significant tailing, has been determined at a synchrotron differ by factors of about two to three. The potentially very important impact of scattered X-ray radiation and pulse pile-up occurring at high photon rates on the sensitivity of the technique is qualitatively discussed.     

Lightweight,Superelastic Boron Nitride/Polydimethylsiloxane Foam as Air Dielectric Substitute for Multifunctional Capacitive Sensor Applications

Porous polymeric foams as dielectric layer for highly sensitive capacitive based pressure sensors have been extensively explored owing to their excellent flexibility and elasticity. Despite intensive efforts, most of previously reported porous polymer foams still suffer from difficulty in further lowering the attainable density limit of ≈0.1 g cm^?3 while retaining high sensitivity and compressibility due to the limitations on existing fabrication techniques and materials. Herein, utilizing 3D interconnected networks of few‐layer hexagonal boron nitride foams (h‐BNFs) as supporting frameworks, lightweight and highly porous BN/polydimethylsiloxane composite foams (BNF@PDMS) with densities reaching as low as 15 mg cm^?3 and permittivity close to that of air are fabricated. This is the lightest PDMS‐based foam reported to date. Owing to the synergistic effects between BN and PDMS, these lightweight composite foams possess excellent mechanical resilience, extremely high compressibility (up to 95% strain), good cyclic performance, and superelasticity. Being electrically nonconductive, the potential application of BNF@PDMS as a dielectric layer for capacitive sensors is further demonstrated. Remarkably, the as‐fabricated device can perform multiple sensing functions such as noncontact touch sensor, environmental monitoring sensor, and high sensitivity pressure sensor that can detect extremely low pressures of below 1 Pa.     

Gaschromatographisch-massenspektrometrische Untersuchung der im Modellsystem Cystein/Methionin/Furfural unter R?stbedingungen gebildeten Aromastoffe

Zusammenfassung Das Modellsystem Cystein/Methionin/Furfural lieferte unter Röstbedingungen ein komplexes Reaktionsgemisch, das sich mittels Adsorptionschromatographie auf Kieselgel und Capillar-GC in ca. 130 Komponenten auftrennen ließ, von denen 85 capillargaschromatographisch-massenspektrometrisch charakterisiert wurden. Furfural und die aus Cystein und Methionin resultierenden reaktiven Abbauprodukte H₂S, Cysteamin und Methylmercaptan sind wichtige Precursor für heterocyclische Flavorkomponenten. Neben Furanen, (Furan)-aldiminen und schwefelsubstituierten Furanderivaten werden auchN-Furfurylpyrrole, Pyridine, Thiazole, Thiazoline, Thiazolidine, Thiophene sowie aliphatische Schwefelverbindungen und cyclische Methylenpolysulfide gebildet. Beim Kaffeerösten entsteht Furfural als eine der Furanhauptkomponenten und spielt bei der Genese wesentlicher Kaffeearomastoffe eine zentrale Rolle.

---

Gaschromatographic-mass spectrometric investigation of aroma compounds from the reaction of cysteine and methionine with furfural under roasting conditions

Summary The model-system cysteine/methionine/furfural produced under roasting conditions a complex mixture of compounds which was separated by adsorption chromatography on silica gel, according to the increasing polarity of the components, into six fractions. The fractions were investigated by capillary gas chromatography with and without mass spectrometry. Of the approx. 130 compounds detected, 85 were identified and quantified. Furfural and the reactive degradation products H₂S, cysteamine and methylmercaptan, resulting from cysteine and methionine, are important precursors for heterocyclic flavor components. Besides furans, (furan)aldimines, and sulphur-substituted furan derivates, the following compounds are also formed:N-furfurylpyrroles, pyridines, thiazoles, thiazolines, thiazolidines, thiophenes, as well as aliphatic sulphur compounds and cyclic methylene polysulfides. During coffee roasting, furfural is produced as one of the major components of the furans and is essential for the formation of important coffee aroma constituents.

---

---

Poster-Präsentation beim Deutschen Lebensmittelchemikertag in Bremen (14.–16. Sept. 1988)     

3D Video Based Segmentation and Motion Estimation with Active Surface Evolution

In this paper, a novel method for three-dimensional (3D) segmentation and motion estimation based on 3D videos provided by TOF cameras is presented. The problem is formulated by a variational statement derived from the maximum a posterior probability (MAP) using 3D Optical Flow Constraint, containing both evolution surface and motion parameters. Therefore, the proposed method allows them to benefit from each other and perform motion segmentation and estimation simultaneously. All the formulation is under the assumption that environmental objects are rigid, and an iterative, PDE-driven level set method is adopted for energy minimization. Various experimental results show the validity of the proposed algorithm.     

Grain Boundaries in Cu(In,Ga)Se2: A Review of Composition–Electronic Property Relationships by Atom Probe Tomography and Correlative Microscopy

Cu(In,Ga)Se₂ thin-film solar cells have attracted significant research interest in recent decades due to their high efficiency in converting solar energy into electricity for enabling a sustainable future. Although the Cu(In,Ga)Se₂ absorber can be grown as a single crystal, its polycrystalline form is dominating the market not only due to its lower costs, but also due to its unexpectedly higher cell efficiency. However, this absorber contains a high fraction of grain boundaries. These are structural defects where deep-trap states can be localized leading to an increase in recombination activity. This controversy is mirrored in the existing literature studies where two main contradictory believes exist: 1) to be crucial grain boundaries in Cu(In,Ga)Se₂ absorber are anomalous, being benign in terms of cell performance, and 2) grain boundaries are regions characterized by an increased recombination activity leading to deteriorated cell performance. Therefore, the present review tackles this issue from a novel perspective unraveling correlations between chemical composition of grain boundaries and their corresponding electronic properties. It is shown that features such as Cu depletion/In enrichment, segregation of 1-2at.% of alkali dopants, and passivation by a wide-bandgap or type inversion at grain boundaries are crucial ingredients for low open-circuit voltage loss and, hence, for superior cell performance.     

Spectrum Determination of Terahertz Sources Using Fabry-Perot Interferometer and Bolometer Detector

We describe a method to determine the radiation spectrum of terahertz sources using a transmitted Fabry-Perot interferometer and a bolometer detector. Our novel Fabry-Perot spectrometer can measure the spectrum of an unknown broadband sub-terahertz and terahertz source. The spectrometer does not need to be pre-tuned. We develop a new algorithm to support the measurements using this spectrometer. Our technique allows us to measure the spectrum over more than an octave, and our numerical algorithm is very stable and robust, providing for an accurate spectrum determination. Two Gunn oscillation sources with the main frequencies at 200 GHz and 600 GHz are used to test the proposed method. The spectrum extracted from the measured data shows that this method is accurate and reliable.     

Multifunktionales Batteriespeichersystem

In the national research project “Multifunctional Battery Storage System (MBS)” open questions were answered concerning the technical feasibility and profitability of a grid-connected battery storage system using a vanadium-redox-flow battery in combination with the renewable power generation plants PV and small wind power (Sterrer et al., Multifunktionales Batteriespeichersystem—MBS-Endbericht. Industrielle Forschung im Rahmen der österreichischen Programmlinie Neue Energie 2020, 3. Ausschreibung, noch nicht veröffentlicht, 2013). The technical implementation and the demonstration operation of the pilot plant over a period of two years showed that the battery storage system is suitable for intelligent marketing of renewable energy as well as the provision of system services for grid stabilisation. However, the investigation of different operating strategies of the pilot battery-storage system, a large scale storage system and pooled PV/battery storage systems as virtual power plant for the participation at the energy trading market and energy reserve market showed that all operation strategies being considered in this study may not be profitable in foreseeable future. However, if the costs of the battery storage system can be reduced to about 250 €/kWh until the year 2030, the application of the vanadium-redox-flow battery in particular in large-scale storage plants (e.g. 10 MW, 100 MWh) for the participation at the energy reserve market seems realistic.