Characterization of the chemical conversion films that form on Mg−Al alloy in colloidal silica solution

Chemical conversion treatment of Mg−Al alloy (AZ91) using colloidal silica as an alternative to chromate conversion was investigated as a function of solution pH, temperature, solution conditions, and treatment time. The solution used for the colloidal silica coating consisted of colloidal silica, titanium sulfate, and cobalt ions to maintain good anti-corrosion and adhesion properties. Adding CoSO₄ to the colloidal silica solution enhanced the adhesion force between the silica film and magnesium substrate. The optimum conditions for the chemical conversion treatment solution were pH 2, 90-sec treatment, and 25°C.     

Effects of rice cleaning and cooking process on the residues of flutolanil,fenobucarb, silafluofen and buprofezin in rice

We studied the effect of cleaning and cooking on the residues of flutolanil, fenobucarb, silafluofen and buprofezin in rice. The rice had been sprayed in a paddy field in Wakayama city, with 3 kinds of pesticide application protocols: spraying once at the usual concentration of pesticides, repeated spraying (3 times) with the usual concentration of pesticides and spraying once with 3 times the usual concentration of pesticides. The residue levels of pesticide decreased during the rice cleaning process. Silafluofen, which has a higher log Pow value, remained in the hull of the rice. Fenobucarb, which has a lower log Pow value, penetrated inside the rice. The residue concentration of pesticide in polished rice was higher than that in pre-washed rice processed ready for cooking. During the cooking procedure, the reduction of pesticides in polished rice was higher than that in brown rice.     

Characterization of polymer-adhesive interfaces on a nanometre scale by elemental mapping and image EELS using EFTEM

Energy-filtering transmission electron microscopy (EFTEM) was applied for investigating interfaces between a polymer and an adhesive. The sample employed in this work is polybutylene terephtharate (PBT) sheets laminated with an epoxy adhesive. It was found that heat aging of the PBT at 180 degrees C in air for > 9 h prior to adhesion decreases the adhesion strength drastically. To investigate this unfavourable aging effect on the adhesion strength, we performed elemental mapping and image EELS using EFTEM. A weak boundary layer with a thickness of < 50 nm was visualized at the PBT-adhesive interface by elemental mapping in the sample subjected to the heat aging and image EELS revealed the origin of this layer. Thus, we clearly correlated the nanoscale interfacial structure with the adhesion strength by EFTEM.     

Confined‐error‐diffusion algorithm for flat‐panel display

Abstract— The reduction of a structural pattern at specific gray levels caused by digital halftone methods is the subject of this paper. This problem is more severe in some flat‐panel displays because their black levels typically are brighter than other display blocks. A patented halftone algorithm, confined error diffusion (CED), that confines the error‐carry within the dither mask is described and extended. First, the CED algorithm that dynamically applies random error diffusion or the ordered‐dither method, depending upon image content, is described in detail. Finally, we propose an advanced CED algorithm for improving the gradation characteristics of the CED algorithm. The performance of the proposed algorithms is compared to the experimental results for natural test images. In order to verify the halftone quality, a structural similarity measure for color images by taking into account the interrelation between color channels is proposed, and the results based on the proposed method, the color similarity measure method, is given.     

Characteristics of flamelets in spray flames formed in a laminar counterflow

A two-dimensional numerical simulation of a spray flame formed in a laminar counterflow is presented, and the flamelet characteristics are studied in detail. The effects of strain rate, equivalence ratio, and droplet size are examined in terms of mixture fraction and scalar dissipation rate. n-Decane (C₁₀H₂₂) is used as a liquid spray fuel, and the droplet motion is calculated by the Lagrangian method without the parcel model. A one-step global reaction is employed for the combustion reaction model. The results show that there appear large differences in the trends of gaseous temperature and mass fractions of chemical species in the mixture fraction space between the spray flame and the gaseous diffusion flame. The gas temperature in the spray flame is much higher than that in the gaseous diffusion flame. This is due to the much lower scalar dissipation rate and the coexistence of premixed and diffusion-limited combustion in the spray flame. For the spray flames, gas temperature and mass fractions of chemical species are not unique functions of the mixture fraction scalar dissipation rate. This is because the production rate of the mixture fraction, namely evaporation rate of the droplets, in the upstream region is not in proportion to its transport-diffusion rate in the downstream region. The behavior shows marked differences as the strain rate decreases, the equivalence ratio increases, or the droplet size decreases.     

Optimally designing caches to reduce P2P traffic

Traffic caused by P2P services dominates a large part of traffic on the Internet and imposes significant loads on the Internet, so reducing P2P traffic within networks is an important issue for ISPs. In particular, a huge amount of traffic is transferred within backbone networks; therefore reducing P2P traffic is important for transit ISPs to improve the efficiency of network resource usage and reduce network capital cost. To reduce P2P traffic, it is effective for ISPs to implement cache devices at some router ports and reduce the hop length of P2P flows by delivering the required content from caches. However, the design problem of cache locations and capacities has not been well investigated, although the effect of caches strongly depends on the cache locations and capacities. We propose an optimum design method of cache capacity and location for minimizing the total amount of P2P traffic based on dynamic programming, assuming that transit ISPs provide caches at transit links to access ISP networks. We apply the proposed design method to 31 actual ISP backbone networks and investigate the main factors determining cache efficiency. We also analyze the property of network structure in which deploying caches are effective in reducing P2P traffic for transit ISPs. We show that transit ISPs can reduce the P2P traffic within their networks by about 50-85% by optimally designing caches at the transit links to the lower networks.     

Quantum Phase Transition in the Infinite Dimensional Hubbard Model

We investigated the ground state of the infinite dimensional Hubbard model for both attractive and repulsive interactions by applying Gutzwiller type variational wave functions. Our variational wave functions have lower energies than the simple BCS wave function for the attractive case, and lower energies than the Brinkman-Rice state for the repulsive case. We found that the system has several phases depending on the density of electrons and the interaction strength. Investigated phases include antiferromagnetic, Fermi liquid, superconducting, charge density wave, and supersolid phases. The last one is a coexistence phase of superconducting and charge density wave states.     

Theoretical Estimation of Changes in Plane Elastic Waves due to Cylindrical Inclusions

Changes in amplitude and phase shifts in plane elastic waves were theoretically estimated when they propagated through an elastic body containing cylindrical inclusions. Based on the integral equation suggested by Lavrov et al., these changes were calculated in the case when only one cylindrical inclusion was located in the body and the propagating waves have a single frequency. These calculations were expanded to more practical case when multiple cylindrical inclusions aligned in the body and the waves have some frequency band. The changes in amplitude and phase shifts calculated were associated to the changes in apparent sonic velocity and attenuation coefficient due to a structural change in the material. This theoretical approach contributes to a quantitative damage evaluation based upon structural changes in various materials by measuring the acoustical parameters such as apparent sonic velocity and attenuation coefficient.     

Synthesis of thermosensitive copolymer beads containing pyridinium groups and their antibacterial activity

Thermosensitive 4VP‐NIPAAm‐4G copolymer beads containing pyridyl groups were first prepared by suspension copolymerization of 4‐vinylpyridine (4VP), N‐isopropylacrylamide(NIPAAm), and tetraethylene glycol dimethacrylate (4G; crosslinking reagent) in a saturated Na₂SO₄ aqueous solution in the presence of surfactant and MgCO₃ as dispersants. Then the copolymer beads containing pyridinium groups were obtained by the quaternization of the copolymer beads with various alkyl iodides (CH₃I, C₄H₉I, C₈H₁₇I) in N,N‐dimethylformamide. The 4VP‐NIPAAm‐4G (15 : 97 : 3) copolymer bead and the 4VP‐NIPAAm‐4G copolymer beads quaternized with butyl iodide exhibited high thermosensitivity in water, although the 4VP‐NIPAAm‐4G copolymer beads quaternized with methyl iodide or octyl iodide hardly exhibited thermosensitivity. All the quaternized copolymer beads exhibited antibacterial activity against Escherichia coli (E. coli), although the 4VP‐NIPAAm‐4G copolymer bead did not. In particular, the copolymer bead quaternized with butyl iodide exhibited the highest antibacterial activity against E. coli at 30°C. It was also found that the antibacterial activity of the quaternized 4VP‐NIPAAm‐4G copolymer beads was greatly affected by not only chain length of alkyl groups in alkyl iodides, with which the 4VP‐NIPAAm‐4G copolymer beads were quaternized, but also by temperature of the solutions. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Metal-Coated &lt;100&gt;-Cut GaAs Coupled to Tapered Parallel-Plate Waveguide for Cherenkov-Phase-Matched Terahertz Detection: Influence of Crystal Thickness

The influence of crystal thickness of metal-coated <100>-cut GaAs (M-G-M) on Cherenkov-phase-matched terahertz (THz) pulse detection was studied. The M-G-M detectors were utilized in conjunction with a metallic tapered parallel-plate waveguide (TPPWG). Polarization-sensitive measurements were carried out to exemplify the efficacy of GaAs in detecting transverse magnetic (TM)- and transverse electric (TE)-polarized THz waves. The reduction of GaAs’ thickness increased the THz amplitude spectra of the detected TM-polarized THz electro-optic (EO) signal due to enhanced electric field associated with a more tightly-focused and well-concentrated THz radiation on the thinner M-G-M. The higher-fluence THz beam coupled to the thinner M-G-M improved the integrated intensity of the detected THz amplitude spectrum. This trend was not observed for TE-polarized THz waves, wherein the integrated intensities were almost comparable. Nevertheless, good agreement of spectral line shapes of the superposed TM- and TE-polarized THz-EO signals with that of elliptically polarized THz-EO signal demonstrates excellent polarization-resolved detection capabilities of M-G-M via Cherenkov-phase-matched EO sampling technique.