Corrosion products of tin in humid air containing sulfur dioxide and nitrogen dioxide at room temperature

To obtain a fundamental understanding of the corrosion behavior of tin in corrosive gas environments, in situ infrared reflection absorption spectroscopy measurements were carried out on tin in humid air containing SO₂ and NO₂ at room temperature. A series of time-resolved in situ IR spectra in air of 90% relative humidity (RH) containing 10-22 ppm SO₂ suggested that the oxide films on tin specimens had a protective effect and that no significant corrosion occurred. The corrosion products in air of 80-90% RH containing 10-22 ppm NO₂ were SnO₂, SnO, nitrate and hyponitrite. The synergistic effect of SO₂ and NO₂ on corrosion of tin was not observed in humid air (RH of 90%) containing 0.84 ppm SO₂ and 1.8 ppm NO₂.     

Comparison of indocyanine green and fluorescein angiography of choroidal neovascularization

We compared indocyanine green (ICG) and fluorescein angiography for evaluation of choroidal neovascularization (CNV). Cast preparations of CNV induced in monkey eyes by laser photocoagulation were correlated with ICG and fluorescein angiographies of the same CNV formations. Fluorescein angiography was more effective, in general, than ICG angiography in detecting CNV; however, CNVs with subretinal hemorrhage (2 of 35 sites) were visible only with ICG angiography. In early phase ICG angiography, CNV formations that casts showed to be dense or composed of thick vessels were seen, but less dense areas were not visible. Lesions that ICG angiography revealed as leaking were not differentiated morphologically from non-leaking areas by the CNV casts. This study confirms that only ICG angiography can identify CNV hidden by subretinal hemorrhage, although fluorescein angiography is otherwise superior. Indocyanine green angiography is indicated as a valuable complement to fluorescein angiography for evaluation of CNV.     

Automatic FeO activity determinator for slag control

An automatic facility for rapid determination of the activities of FeO in metallurgical slags has been developed, by employing an electrochemical technique incorporating stabilized zirconia as solid electrolyte, a mixture of Mo + MoO₂ as reference electrode and an Mo rod as an electrical contact. With this equipment, one datum is obtainable within 5 minutes. In the present article, discussions were held on potential applications of this system to steelmaking process control. A particular emphasis is given to the control of FeO levels in slags used for secondary steelmaking and chromium levels in stainless steelmaking slags.     

Efficient error estimation and adaptive meshing method for boundary element analysis

This paper describes a new and efficient error estimator by using the Direct Regular Method and h or h-r adaptive meshing for BEM analysis. This posteriori error estimator correctly indicates the discretization errors on each element. Based on the error distribution, and the adaptive meshing is generated automatically. The accuracy and convergence of this method are demonstrated by the numerical results on the stress concentration problem and the crack problem.     

Occurrence and production of chloramines in the chlorination of creatinine in aqueous solution

Occurrence and production of stable chloramines in the chlorination of creatinine, a constituent of perspiration and urine, in aqueous media were studied. Creatinine (5 x 10(-5)M) was treated with free chlorine in aqueous solutions at molar ratios of 0.5-8 (chlorine/creatinine) at pH 7.0 at room temperature for several days. At lower ratios of chlorine, two stable N-chlorocreatinine derivatives, which were determined as dichloramine fractions by the DPD method, were isolated by HPLC and identified by EI-MS and (1)H-NMR. One was 2-chloroamino-1-methylimidazolin-4-one (creatinine chloramine) and the other was 2-chloroamino-5-hydroxy-1-methylimidazolin-4-one (hydroxycreatinine chloramine). In addition, the formation of methylamine was identified by GC-MS analyses of its imine derivative formed with pentafluorobenzaldehyde. Methylamine forms stable chloramines, which might be determined as mono- and/or di-chloramine fractions together with free chlorine by the DPD method in the reaction mixtures at higher molar ratios of chlorine. In practice, small amounts of methylamine (ca. 19 microg/L) were detected in water samples collected from several swimming pools. Hence, methylamine may be an origin of elusive organic chloramine formed in the chlorination of swimming pools. A probable mechanism of the occurrence and processing of chlorination products of creatinine is suggested.     

Formaldehyde-limited cultivation of a newly isolated methylotrophic bacterium, Methylobacterium sp. MF1: enzymatic analysis related to C1 metabolism

Formaldehyde is a highly toxic compound to most living organisms. We have isolated a bacterial strain that is able to efficiently degrade formaldehyde and use it as a sole carbon source. The isolated strain was identified as Methylobacterium sp. MF1, which could grow on formaldehyde and methanol. Methylobacterium sp. MF1 was grown in batch culture using 1.2 g/l formaldehyde as a sole carbon source, which was all consumed within 200 h. In order to decompose formaldehyde more efficiently, formaldehyde-limited chemostat cultivation of Methylobacterium sp. MF1 was investigated. Formaldehyde was consumed at 1.7 g/l/d when the dilution rate was 0.012 h(-1). Under these conditions, the cell turbidity (OD610) reached 2.0. Furthermore, when the initial turbidity was adjusted to 3.0 using methanol-grown cells, continuous cultivation could be started at an initial dilution rate of 0.008 h(-1). Using these conditions, consumption of formaldehyde could be continued for at least 600 h. The enzyme activities of cells growing as a chemostat culture, using methanol or formaldehyde as a sole carbon source, were compared to that of C1 metabolism. No difference was detected in the enzyme activities for the oxidation and assimilation of C1 compounds between the two cell-free extracts. Furthermore, methanol dehydrogenase activity was detected at the same level when formaldehyde was used as a sole carbon source. These results suggest that the resistance to the toxic effects of formaldehyde exhibited by Methylobacterium sp. MF1 is related to factors other than C1 metabolism.     

Commercialization of Micro-fabrication of Antenna-Coupled Transition Edge Sensor Bolometer Detectors for Studies of the Cosmic Microwave Background

We report on the development of commercially fabricated multichroic antenna-coupled transition edge sensor (TES) bolometer arrays for cosmic microwave background (CMB) polarimetry experiments. CMB polarimetry experiments have deployed instruments in stages. Stage II experiments deployed with O(1000) detectors and reported successful detection of B-mode (divergence-free) polarization pattern in the CMB. Stage III experiments have recently started observing with O(10,000) detectors with wider frequency coverage. A concept for a stage IV experiment, CMB-S4, is emerging to make a definitive measurement of CMB polarization from the ground with O(400,000) detectors. The orders of magnitude increase in detector count for CMB-S4 require a new approach in detector fabrication to increase fabrication throughput and reduce the cost. We report on collaborative efforts with two commercial micro-fabrication foundries to fabricate antenna-coupled TES bolometer detectors. The detector design is based on the sinuous antenna-coupled dichroic detector from the POLARBEAR-2 experiment. The TES bolometers showed the expected I–V response, and the RF performance agrees with the simulation. We will discuss the motivation, design consideration, fabrication processes, test results, and how industrial detector fabrication could be a path to fabricate hundreds of detector wafers for future CMB polarimetry experiments.     

Sensor design and image accuracy for application of capacitance CT to the petroleum refinery process

Fluid catalytic cracking (FCC) catalysts are used to produce high-quality petroleum from residual oil by the contact cracking process in the petroleum refinery. The key point in producing high-quality petroleum from residual oil is uniform fluidization at the mixing point. The sensor for capacitance computed tomography (CT) is designed to visualize the powder concentration in the process of mixing air and FCC catalysts in a vertical pipeline. The concentration distribution images are obtained under certain air-catalyst parameter conditions. The relationship between the air-catalyst parameter condition and the powder distribution is analyzed in detail. Moreover, the accuracy of the reconstructed image is discussed systemically in terms of volume fraction, residual capacitance, and capacitance correlation.